- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
In the world of heavy-duty trucking, optimizing every aspect of performance is key to profitability. The genuine DZ16251110006 Cab Fairing is a crucial aerodynamic component designed specifically for SHACMAN trucks. As an essential Shacman truck parts, it streamlines airflow between the truck’s cab and trailer, significantly reducing drag. This OEM part, identified by number DZ16251110006, is engineered for a perfect fit, ensuring maximum efficiency gains, improved stability, and a modern, integrated appearance for your vehicle.
Cab Fairing
Обтекатель кабины
Carena de la Cabina
At highway speeds, a significant portion of a truck’s engine power is used to overcome air resistance or drag. The gap between the tall, square cab and the taller trailer creates turbulent airflow, which is a major source of this drag. The SHACMAN Cab Fairing DZ16251110006 is scientifically designed to bridge this gap smoothly. It guides the airflow from the roof of the cab up and over the front of the trailer, minimizing the low-pressure turbulent zone behind the cab.
This reduction in aerodynamic drag translates directly into lower fuel consumption. For fleet operators, even a single-digit percentage improvement in fuel efficiency leads to substantial annual savings, especially for long-haul vehicles covering hundreds of thousands of kilometers. The DZ16251110006 is not an accessory; it’s a return-on-investment component. Additionally, by reducing buffeting and drag, it also contributes to better vehicle stability and reduced driver fatigue on long journeys.
The DZ16251110006 fairing is engineered for durability and performance. It is typically manufactured from high-quality, fiberglass-reinforced polymer (GRP) or lightweight, yet sturdy thermoplastic. These materials are chosen for their excellent strength-to-weight ratio, resistance to UV radiation, and ability to withstand extreme temperature fluctuations and weather conditions without cracking or warping.
The surface finish is usually a high-gloss gel coat that is integral to the material, providing a lasting shine and color that resists fading. The genuine DZ16251110006 is designed to look like a factory-installed part, seamlessly integrating with the lines of the SHACMAN cab.
Refer to the table below for the complete technical details of this SHACMAN aerodynamic component. This information is crucial for verifying compatibility and understanding the product’s specifications.
| Parameter | Specification |
|---|---|
| OEM Number | DZ16251110006 |
| Product Name | Cab Fairing (Roof Fairing) |
| Brand | SHACMAN |
| Primary Material | Fiberglass Reinforced Plastic (FRP) / Thermoplastic |
| Compatibility | SHACMAN High-Roof Cab Models (X3000, etc.) |
| Adjustability | Yes, typically height or angle adjustable |
| Finish/Color | White Gel Coat (Standard), other colors possible |
| Included | Fairing, mounting brackets, hardware kit |
Installing the SHACMAN Cab Fairing DZ16251110006 is a precise task best performed by two people. The process involves positioning the fairing on the cab roof, marking the drilling points through the pre-existing mounting holes in the fairing’s base, and then carefully drilling into the cab roof. It is absolutely critical to use the proper sealant (often butyl tape or silicone) with every bolt and penetration to prevent water leaks into the cab.
Once securely mounted, the fairing must be adjusted. The top section of the DZ16251110006 can usually be loosened and extended or angled. The ideal position is where the top edge of the fairing is as close as possible to the trailer’s front wall, with a gap of only a few centimeters. This creates a smooth aerodynamic transition. Proper installation and adjustment are key to unlocking the full fuel-saving potential of this component.
The primary benefit of the DZ16251110006 is measurable fuel cost reduction. Studies and real-world fleet data show that an effective roof fairing can improve fuel economy by 3% to 7% on long-haul routes, depending on conditions and trailer compatibility. For a single truck consuming 50,000 liters of fuel annually, a 5% saving equals 2,500 liters—a direct and significant boost to the bottom line.
Beyond fuel, the fairing reduces wind noise in the cab, leading to a quieter and more comfortable environment for the driver. It also minimizes the accumulation of dirt and insects on the front of the trailer. For fleet managers, equipping trucks with genuine fairings like the DZ16251110006 demonstrates a commitment to operational efficiency, sustainability (through lower emissions per kilometer), and professional appearance, which can be beneficial for corporate branding.
The genuine DZ16251110006 is designed using SHACMAN’s vehicle data, ensuring its shape works in harmony with the cab’s own airflow characteristics for maximum drag reduction.
Made with UV-stabilized, high-grade composites, it resists fading, cracking, and weathering for years, unlike cheaper alternatives that can become brittle and fail.
It comes with all necessary, vehicle-specific brackets and hardware for a secure, leak-proof installation, eliminating guesswork and the need to source separate parts.
The SHACMAN Cab Fairing DZ16251110006 is a clear example of smart engineering delivering direct operational benefits. It transforms a basic cab roof into an active aerodynamic surface, directly combating one of the biggest costs in trucking: fuel consumption.
Whether you are outfitting a new truck or retrofitting an existing one in your fleet, choosing the genuine OEM part DZ16251110006 ensures you get a proven, reliable, and effective solution. It pays for itself over time, enhances vehicle performance, and contributes to a more sustainable and profitable operation. For maximum efficiency, always pair it with correctly adjusted side skirts and trailer gap fairings.
This product information is for reference. Aerodynamic savings vary based on driving conditions, speed, trailer configuration, and proper adjustment. Installation requires drilling into the vehicle’s cab roof. We highly recommend professional installation by a qualified technician to ensure a watertight seal and correct aerodynamic alignment. Always verify the compatibility of part DZ16251110006 with your exact SHACMAN truck model and cab type.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
