- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The foundation of a truck’s ride, handling, and load-bearing capability lies in its suspension system, with the front spring frame being a cornerstone structural component. As a critical element within the catalog of robust SANY parts, the OEM QDP004988320 Front Spring Frame is engineered to provide unmatched strength and durability for the vehicle’s front suspension. This genuine assembly, identified by the specific part number QDP004988320, serves as the rigid mounting platform for leaf springs, shackles, shock absorbers, and axle locating components.
It is designed to withstand immense stress from payloads, road impacts, and torsional forces, ensuring proper suspension geometry and alignment. Replacing a damaged or fatigued frame with the authentic QDP004988320 unit is a fundamental repair that directly impacts vehicle safety, stability, and the longevity of other front-end components.
Front Spring Frame
Передняя рессорная рама
Bastidor del Muelle Delantero
The SANY QDP004988320 Front Spring Frame is not merely a bracket; it is a precision-engineered structural member that forms a critical part of the truck’s chassis system. Its primary function is to provide a stable, immovable anchor point for the front suspension’s leaf springs. By securely holding the front end of the spring pack, it defines the axle’s fore-aft location and plays a key role in determining ride height and suspension articulation. The frame absorbs and transfers loads from the springs into the main chassis rails, managing forces generated by braking, cornering, and vertical impacts from road irregularities.
Constructed from high-tensile steel, the QDP004988320 is designed with specific geometry to match the chassis layout of designated SANY truck models. It incorporates reinforced mounting points for spring hangers, shock absorber brackets, and potentially anti-roll bar links. A compromised or misaligned spring frame can lead to a cascade of problems, including improper axle positioning, accelerated spring wear, poor handling, and uneven tire wear. Therefore, ensuring the integrity of the QDP004988320 component is vital for maintaining the vehicle’s designed suspension dynamics and overall structural harmony. Its robust design is a direct response to the punishing demands of commercial transport and construction site operations.
The QDP004988320 is fabricated from laser-cut or punched high-yield-strength steel plates. These are then robotically welded to form a rigid, box-section or C-channel structure that provides exceptional resistance to bending and torsional stress.
Every mounting hole, bracket angle, and surface is manufactured to original SANY blueprints. This guarantees perfect alignment with the chassis, springs, and other suspension components, preserving factory handling and load distribution.
After fabrication, the QDP004988320 frame undergoes surface preparation (shot blasting) and is coated with a high-quality primer and paint or powder coat. This provides long-term protection against rust and corrosion from road salt and moisture.
Critical stress areas, such as spring hanger pivot holes and shock absorber mounting bosses, are reinforced with additional gussets, welds, or thicker material. This prevents wallowing, elongation, and fatigue cracking in the QDP004988320 under cyclic loads.
Supplied as a fully welded and finished assembly, the QDP004988320 often includes pre-installed bushings or bolts for certain attachments. This simplifies installation and ensures all components are aligned correctly from the factory.
The design allows for accessible bolt heads and clearances for standard tools, facilitating easier removal and installation during maintenance or repair operations involving the QDP004988320 frame.
Detailed OEM specifications for the Front Spring Frame assembly. Dimensions and weight are approximate and model-specific.
| Parameter | Specification | Details / Unit |
|---|---|---|
| OEM Part Number | QDP004988320 | Genuine SANY Identification |
| Component Name | Front Spring Frame / Front Spring Hanger Assembly | Primary Function |
| Brand | SANY | Manufacturer |
| Construction Material | High-Tensile Low-Alloy Steel (Q345B or similar) | Primary Material Grade |
| Overall Length (Approx.) | 1200 – 1500 mm | Varies by truck model and axle width |
| Overall Width (Approx.) | 250 – 350 mm | Cross-sectional dimension |
| Mounting Hole Pattern | Vehicle-Specific | Matches chassis rail drilling |
| Spring Hanger Center Distance | As per suspension design | Critical for axle placement and spring geometry |
| Bushing Type (if included) | Rubber or Polyurethane | For vibration damping and articulation |
| Surface Finish / Coating | Primer + Automotive Paint / Powder Coat | Corrosion protection |
| Weight (Approx.) | 45 – 75 kg | Varies with size and reinforcement |
| Compatible Models | SANY Dump Trucks, Concrete Mixers, Haulers | Specific chassis codes apply |
The front spring frame is subjected to constant stress, and its failure can manifest in several ways, compromising vehicle safety and performance. Recognizing these signs indicates the need for inspection and potential replacement with the genuine QDP004988320 unit.
Installing the genuine SANY QDP004988320 Front Spring Frame addresses these issues at their root. It restores the correct, factory-mandated hard points for the suspension system, allowing for proper alignment, load distribution, and predictable handling. It is the definitive repair for structural fatigue in the front suspension mounting system.
Preparation & Safety: The vehicle must be securely supported on heavy-duty jack stands. The front axle and springs must be suitably supported to relieve weight from the old QDP004988320 frame before removal.
Removal: Unbolt and remove all connected components: shock absorbers, stabilizer bar links, spring shackles, and any brake line brackets. Carefully unbolt the old frame from the chassis rails. Note the location of any shims used for alignment.
Installation: Position the new QDP004988320 frame onto the chassis, aligning all bolt holes. Install all new, high-grade bolts and nuts finger-tight initially. Refer to the service manual for the correct torque sequence and specification, gradually tightening in a cross pattern to ensure even clamping force and prevent distortion.
Reassembly: Reattach all suspension components, springs, and linkages using new hardware where specified. Ensure all bushings are correctly seated and not twisted.
Wheel Alignment is Mandatory: Replacing a major structural component like the QDP004988320 will almost certainly alter the front end geometry. A professional, full front-end alignment (checking and adjusting caster, camber, and toe) is absolutely essential after installation. Do not operate the vehicle at highway speeds before this is completed.
Torque Re-check: After the vehicle has been lowered to the ground and driven a short distance (e.g., 50-100 km), re-torque all critical frame and suspension mounting bolts according to specifications. This accounts for settling and component compression.
Test Drive & Inspection: Conduct a careful test drive, listening for any new noises and assessing handling. Visually inspect the installation area after the test for any signs of movement, stress, or contact.
Professional Recommendation: Due to the weight of components, the need for precise alignment, and the critical safety nature of the repair, installation of the QDP004988320 is strongly recommended to be performed by a qualified heavy-duty truck mechanic or workshop.
The spring frame is a safety-critical structural component. Compromising on its quality or fitment jeopardizes the entire front suspension system.
Only the genuine QDP004988320 guarantees the exact hole centers, bracket angles, and overall geometry required for a perfect fit and correct suspension alignment, which non-OEM copies often get wrong.
SANY certifies the steel grade and welding standards for the QDP004988320. Inferior materials or poor weld penetration in imitation parts can lead to catastrophic failure under load.
This component directly affects vehicle control. Using a non-genuine part that fails could have serious safety consequences and may impact insurance or liability in the event of an accident.
The genuine QDP004988320 is backed by SANY’s parts warranty. Its correct installation and durability protect your investment by preventing misalignment damage to tires and other suspension components.
The SANY QDP004988320 Front Spring Frame is the definitive structural anchor for your truck’s front suspension. Its role in maintaining alignment, handling, and safety cannot be overstated. Choosing anything other than the genuine OEM part introduces unacceptable risk to the vehicle’s operational integrity and the safety of its operator. For fleet managers and owners who demand reliability and refuse to compromise on foundational components, specifying the authentic SANY part number QDP004988320 is the only responsible course of action. It ensures your truck’s suspension is built on the same solid, reliable foundation intended by SANY’s engineers.
Support the load. Ensure the alignment. Trust SANY Genuine Parts.
If you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
