- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
In the realm of commercial vehicle maintenance, precision monitoring components are crucial for optimal performance. As a leading provider of high-quality SANY parts, we introduce the HQ3826010SQ13 Air Pressure Sensor PS1101 Aptiv+M22 – a sophisticated OEM component engineered for accurate pressure measurement in critical truck systems.
The HQ3826010SQ13 sensor plays a vital role in ensuring brake system efficiency, tire safety, and overall vehicle health by providing reliable data to the vehicle’s control unit. This essential part from SANY is designed to meet the rigorous demands of modern transportation, offering durability and precise readings under various operating conditions. Investing in genuine components like the HQ3826010SQ13 guarantees compatibility and long-term reliability for your fleet.
Air Pressure Sensor Ps1101 Aptiv+M22
Датчик давления воздуха Ps1101 Aptiv+M22
Sensor de Presión de Aire Ps1101 Aptiv+M22
The SANY HQ3826010SQ13 is a state-of-the-art air pressure sensor designed specifically for heavy-duty truck applications. Utilizing advanced Aptiv sensing technology and a robust M22 connector interface, this component delivers exceptional accuracy in monitoring pneumatic pressure within brake systems, air suspensions, and tire inflation setups. By continuously transmitting real-time pressure data to the vehicle’s Electronic Control Unit (ECU), the HQ3826010SQ13 enables proactive maintenance, prevents system failures, and enhances overall driving safety.
Its compact and rugged construction ensures it withstands the vibrations, temperature fluctuations, and moisture commonly encountered in demanding transport environments. This sensor is a direct OEM replacement, guaranteeing a perfect fit and seamless integration with existing SANY truck architectures, making the HQ3826010SQ13 a trusted choice for fleet managers and technicians worldwide.
The HQ3826010SQ13 Air Pressure Sensor offers a combination of technological innovation and practical reliability. Below are its standout features that contribute to superior vehicle performance and safety.
The following table details the complete technical parameters of the SANY Air Pressure Sensor. These specifications are essential for verifying compatibility and understanding its capabilities.
| Parameter | Specification | Details / Unit |
|---|---|---|
| OEM Part Number | HQ3826010SQ13 | Primary Identification |
| Product Name | Air Pressure Sensor PS1101 Aptiv+M22 | Description |
| Brand | SANY | Manufacturer |
| Sensor Type | Piezoresistive / Absolute Pressure | Operating Principle |
| Pressure Range | 0 to 150 psi (0 to 10.34 bar) | Measuring Capacity |
| Output Signal | Analog (0.5-4.5V) or PWM | Electrical Interface |
| Connector Type | M22 x 1.5 | Thread & Electrical Standard |
| Supply Voltage | 5 VDC ±0.25V / 12 VDC (as per variant) | Operating Voltage |
| Operating Temperature | -40°C to +125°C | Range |
| Accuracy | ±1.5% Full Scale | Maximum Error |
| Ingress Protection | IP67 | Dust & Water Resistance |
| Compatible Systems | Air Brake, Suspension, Tire Pressure | Primary Applications |
The HQ3826010SQ13 sensor is a versatile component integral to several key vehicle systems. Its primary function is to ensure these systems operate within safe and efficient pressure parameters.
Air Brake System Monitoring: This is the most critical application. The sensor constantly measures air reservoir pressure, providing data crucial for anti-lock braking systems (ABS) and electronic brake force distribution. A properly functioning HQ3826010SQ13 helps prevent brake fade and ensures maximum stopping power is available.
Air Suspension Control: In trucks equipped with pneumatic suspensions, the sensor monitors air spring pressure. This allows the ECU to automatically adjust ride height for load leveling, stability, and comfort, regardless of cargo weight.
Tire Pressure Monitoring (Indirect): While not a direct TPMS sensor, the HQ3826010SQ13 can contribute to system health checks. Pressure data from the central air system can be used in conjunction with other sensors to infer the status of pneumatic circuits that serve automatic tire inflation systems.
General Pneumatic System Health: The sensor is also used to monitor pressure in auxiliary pneumatic systems that power cab tilting, clutch actuation, or air-assisted controls, ensuring these functions are ready for operation.
Correct installation and periodic maintenance are key to maximizing the lifespan and accuracy of the HQ3826010SQ13 sensor. Follow these general guidelines for best results.
1. Depressurize the target air system completely. 2. Clean the port thread to remove debris. 3. Apply appropriate thread sealant (if required, not on the sensor tip). 4. Screw in the HQ3826010SQ13 by hand, then tighten to the specified torque (typically using an M22 spanner) to avoid damage. 5. Connect the electrical harness securely to the M22 plug. 6. Repressurize the system and check for leaks. 7. Use diagnostic tools to verify sensor signal output.
While the HQ3826010SQ13 is typically pre-calibrated, it’s good practice to verify its readings against a master gauge after installation. Use the truck’s onboard diagnostic (OBD) port or a compatible scanner to check for fault codes related to pressure sensor circuits (e.g., implausible signal, open circuit). Regular checks ensure the sensor providing data for the HQ3826010SQ13 component remains accurate.
During routine service intervals, visually inspect the HQ3826010SQ13 for physical damage, corrosion on the connector, or oil/water contamination in the air lines. Ensure the breather hole (if present) is not clogged. Contaminated air can drastically reduce sensor life. Using clean, dry air in the system is the best preventive maintenance for any pressure sensor, including the HQ3826010SQ13.
Choosing the right pressure sensor impacts vehicle safety, operational costs, and uptime. The HQ3826010SQ13 from SANY offers distinct advantages over generic aftermarket alternatives.
Guaranteed Compatibility and Fit: As a genuine OEM part with the exact HQ3826010SQ13 number, it is designed to the original specifications of SANY trucks. This eliminates guesswork, modification needs, and the risk of poor performance due to incorrect sizing or electrical interface mismatch.
Uncompromised Reliability: SANY components undergo stringent quality control and endurance testing. The HQ3826010SQ13 is built to deliver consistent performance over thousands of operating hours, reducing the likelihood of premature failure that can lead to costly roadside breakdowns and towing.
Optimal System Performance: Accurate pressure data from the HQ3826010SQ13 allows the vehicle’s advanced control systems to function as intended. This translates to optimal brake balance, improved fuel efficiency (through proper suspension alignment), and reduced wear on other pneumatic components.
Cost-Effectiveness: While the initial investment might be higher than a non-OEM part, the long-term cost benefits of the HQ3826010SQ13 are clear. Its durability means fewer replacements, and its accuracy helps avoid secondary damage to more expensive systems like the ABS modulator, leading to lower total cost of ownership.
Even robust components can face issues. Understanding common symptoms related to the HQ3826010SQ13 can expedite repairs.
The HQ3826010SQ13 Air Pressure Sensor PS1101 Aptiv+M22 is more than just a spare part; it is a critical safety and performance component for your SANY truck. Its precision engineering, durable construction, and seamless integration make it the only recommended choice for replacement. Do not compromise on a component that plays such a vital role in vehicle safety. Always insist on the genuine HQ3826010SQ13 part number to ensure you receive the quality and reliability engineered by SANY. By choosing this OEM sensor, you protect your investment, ensure regulatory compliance for vehicle safety systems, and maintain the high performance standards expected from your truck.
For all your maintenance needs, trust the complete catalog of genuine SANY components designed to keep your fleet running smoothly and safely.
If you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
