- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The seamless operation of a manual transmission in a heavy-duty truck hinges on a perfectly functioning clutch system. At the heart of this system lies the clutch release bearing, a critical component responsible for engaging and disengaging the clutch with precision. As an essential part of the reliable SANY parts lineup, the Release Bearing with OEM number 61005716 is engineered for durability and performance under extreme pressure. This bearing acts as the vital interface between the clutch fork and the diaphragm spring, ensuring smooth gear changes and protecting the entire drivetrain from damage. For fleet operators and drivers, the genuine 61005716 component is synonymous with reliable shifting, reduced pedal effort, and extended clutch life.
The SANY 61005716 is a precision clutch release bearing, also known as a throw-out bearing. Its primary function is to disengage the clutch when the driver depresses the clutch pedal. It slides along the transmission input shaft and presses against the fingers of the clutch diaphragm spring. This action releases the pressure on the clutch disc, interrupting power flow from the engine to the gearbox for smooth gear changes. The bearing 61005716 must withstand constant rotational forces, axial loads, and high temperatures generated by clutch operation.
A failing release bearing can cause many problems, including grinding noises when the clutch is depressed, difficulty shifting gears, clutch pedal vibration, or even complete clutch failure. The genuine SANY part, identified by the number 61005716, is engineered to match the exact specifications of your truck’s clutch assembly, ensuring optimal contact angle and load distribution on the diaphragm spring for reliable operation over thousands of cycles.
Precision-ground bearing races and high-quality steel balls ensure minimal friction and noise. The bearing 61005716 operates silently, eliminating the tell-tale chirping or grinding sounds associated with worn bearings, providing a more comfortable cabin environment.
Manufactured with special heat-treated steel and lubricated with high-temperature grease, the 61005716 bearing maintains its integrity and lubricity even under the intense heat generated during frequent clutch use in stop-and-go traffic or on steep grades.
Engineered for the high torque output of SANY trucks, this bearing features a reinforced cage and increased load-carrying capacity. It reliably handles the significant axial pressure required to disengage heavy-duty clutch springs without deformation or premature wear.
The table below outlines the core technical specifications for the SANY Clutch Release Bearing, part number 61005716. This information is crucial for mechanics to verify compatibility and understand the engineering behind this vital component.
The SANY 61005716 release bearing is designed for specific SANY truck models, typically those with manual transmissions. It is crucial to verify compatibility with your vehicle’s model year, engine, and transmission code before purchase. This bearing is not a universal part; using an incorrect bearing can lead to improper clutch disengagement, rapid wear, and damage to the clutch fork or diaphragm spring. The part number 61005716 guarantees a perfect match for the intended application, ensuring the correct dimensions and load capacity.
Drivers and technicians should be alert to symptoms of a failing bearing. The most common sign is a high-pitched whirring, chirping, or grinding noise that appears only when the clutch pedal is depressed and disappears when the pedal is released. This noise indicates dry or damaged bearing elements. Other indicators include a rough feeling through the clutch pedal, difficulty shifting gears, or a clutch that fails to disengage completely (causing gear grinding even with the pedal fully down). When these signs appear, inspecting and replacing the 61005716 bearing during a clutch service is highly recommended to prevent further damage.
Replacing the clutch release bearing, part number 61005716, is a task that requires significant disassembly of the drivetrain, typically involving removing the transmission. Therefore, it is almost always replaced as part of a full clutch kit installation (including disc and pressure plate). During installation, it is paramount to clean the transmission input shaft sleeve and apply a thin layer of the specified grease (often provided with the bearing) to ensure smooth sliding. The bearing must be correctly oriented on its carrier or fork.
Never wash a sealed bearing like the 61005716 in solvent, as this will remove the internal lubricant and lead to instant failure. Ensure the clutch fork is in good condition and pivots freely. After installation, proper adjustment of the clutch pedal free play is essential to prevent the bearing from being in constant contact with the diaphragm spring, which would cause it to overheat and wear out prematurely. This “riding” of the bearing is a common cause of early failure.
Opting for the OEM bearing ensures performance and reliability that aftermarket parts may not guarantee:
The clutch release bearing, though small, plays an indispensable role in the functionality and feel of your truck’s manual transmission. A high-quality bearing like the SANY 61005716 ensures crisp, reliable gear shifts and protects the more expensive clutch disc and pressure plate from undue wear caused by incomplete disengagement. Its failure can lead to increased driver fatigue, costly downtime, and more extensive drivetrain repairs.
For maintenance planning, it is wise to replace the release bearing every time the clutch is serviced. Proactively installing a genuine 61005716 bearing prevents unexpected failures that lead to costly downtime and more extensive repairs. Trusting SANY OEM parts for this critical interface guarantees that your investment continues to deliver the performance and reliability expected from heavy-duty equipment, keeping your fleet on the road and productive.
Final Recommendation: Ensure smooth shifting and protect your clutch system. Always specify the genuine SANY 61005716 Clutch Release Bearing for your next repair or service. It’s the precise component your drivetrain needs for long-lasting, reliable operation mile after mile.
If you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
