- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
For SANY truck engines to perform reliably under extreme loads, maintaining precise coolant circulation and fan speed control is critical. The genuine 160802010008A Viscoil Assembly With Impeller is an advanced OEM component that integrates the viscous fan clutch and cooling fan into one robust unit, ensuring optimal engine temperature management. As a sophisticated and essential part of the comprehensive SANY parts catalog, the 160802010008A assembly guarantees perfect compatibility and restores the factory-designed cooling efficiency of your heavy-duty vehicle.
Engineered to respond dynamically to engine heat load, it reduces unnecessary fan engagement to save fuel while providing maximum airflow when needed during demanding operations in mining, construction, or high-ambient temperatures. Investing in the authentic 160802010008A protects your engine from overheating, enhances fuel efficiency, and ensures the long-term reliability of your cooling system.
Viscoil Assembly With Impeller
Вязкостная муфта в сборе с крыльчаткой
Conjunto de Embrague Viscoso con Impulsor
The 160802010008A assembly is a sophisticated thermal management device. At its core is a viscous fan clutch filled with a temperature-sensitive silicone fluid. This clutch is mounted on the engine’s water pump pulley and drives the attached fan impeller (blades). When the engine is cool, the silicone fluid inside the clutch remains thin, allowing the clutch to slip. This means the fan spins at a much slower speed than the engine pulley, reducing parasitic drag, saving fuel, and minimizing noise. As under-hood temperature rises, a bimetallic coil or thermostatic spring on the front of the 160802010008A unit reacts, opening a valve that allows more silicone fluid into the working chamber of the clutch.
The increased fluid creates greater shear resistance, causing the clutch to engage more fully. This transmits more engine power to the fan impeller, increasing its speed dramatically to pull a large volume of air through the radiator and condenser. This process is continuous and proportional; the 160802010008A provides just the right amount of cooling airflow needed at any given moment. This intelligent operation prevents engine overheating under heavy loads or in slow-moving traffic, while avoiding overcooling and the associated inefficiencies during highway cruising. A failed unit, unlike the reliable 160802010008A, can lead to either constant excessive fan engagement (wasting power) or total failure to engage (causing overheating).
The 160802010008A is a precision-engineered assembly comprising several key components. The main body is the viscous clutch housing, typically made from die-cast aluminum for optimal heat dissipation and lightweight strength. Inside, it contains the silicone fluid reservoir, a pump mechanism, and precisely machined clutch plates. The front of the assembly features the thermostatic actuator—a bimetallic spring or coil that expands and contracts with temperature changes to control the fluid valve. This actuator is calibrated to specific engagement temperatures for the SANY engine application. The unit is sealed to prevent fluid leakage, which would cause failure.
Attached directly to the clutch is the fan impeller. In the 160802010008A assembly, this is a multi-bladed fan, often made from reinforced glass-filled nylon or steel, designed for maximum airflow with minimal noise. The blades are aerodynamically shaped and balanced as a complete unit to prevent vibration. The entire assembly is mounted via a heavy-duty bearing and hub onto the water pump shaft. The engineering of the 160802010008A ensures that it can withstand the high rotational forces, thermal cycling, and vibration inherent in heavy-duty diesel operation, providing a long service life.
The table below details the core technical specifications for the genuine SANY 160802010008A Viscoil Assembly With Impeller. This data is crucial for verifying application and understanding the component’s performance parameters.
| Parameter | Specification | Details |
|---|---|---|
| OEM Part Number | 160802010008A | Genuine SANY Identification |
| Component Name | Viscoil Assembly With Impeller | Viscous Fan Clutch & Fan Assembly |
| Clutch Type | Thermostatic Viscous Fan Drive | Temperature-Activated Engagement |
| Actuator Type | Bimetallic Coil / Thermostatic Spring | Responds to Ambient Radiator Air Temp |
| Fan Diameter | Model-Specific (e.g., 720mm) | Determines Airflow Capacity |
| Fan Material | Glass-Filled Nylon / Steel | Durable, Lightweight, Balanced |
| Mounting Type | Bolt-On to Water Pump Pulley/Hub | Secure, Direct Drive Connection |
| Engagement Temperature Range | Calibrated to Engine Requirements | Typically begins ~70-80°C (158-176°F) |
| Rotation Direction | Clockwise or Counter-Clockwise | Specified for Engine Configuration |
| Compatible Engines | Specific SANY Diesel Engines | Verify with Engine Model & Serial |
Replacing the 160802010008A Viscoil Assembly requires careful attention to ensure proper cooling system function. Begin by ensuring the engine is completely cool. Safely disconnect the battery. Drain a sufficient amount of coolant from the radiator to prevent spillage when removing the fan shroud (if equipped). Loosen and remove the drive belts for the water pump/alternator. Unbolt the fan shroud and move it aside. The 160802010008A assembly is typically mounted with four bolts to the water pump pulley. Support the assembly, remove these bolts, and carefully lift the entire unit (clutch and fan) out of the engine bay. Clean the mounting surface on the water pump pulley.
Position the new genuine 160802010008A assembly, aligning it with the bolt holes. Install and torque the mounting bolts to the manufacturer’s specification in a criss-cross pattern to ensure even seating. Reinstall the fan shroud, drive belts (tensioned correctly), and refill the coolant. Reconnect the battery. Start the engine and allow it to reach operating temperature while monitoring for leaks and listening for unusual noises. The new 160802010008A may initially run the fan more as it primes; this is normal. Always refer to the specific SANY truck service manual for detailed procedures and torque values.
Never attempt to stop a spinning fan, especially a viscous unit, by hand. The 160802010008A fan can engage unexpectedly due to heat from the engine, even with the ignition off, posing a serious injury risk.
The intelligent design of the 160802010008A ensures your engine operates within its ideal temperature window. By providing variable fan speed, it prevents overheating during heavy loads or idle and avoids overcooling on the highway. This precise thermal management is critical for optimal combustion efficiency, reduced emissions, and prevention of heat-related engine damage like head gasket failure or warped components.
Unlike a fixed fan that constantly consumes engine power, the 160802010008A disengages when cooling demand is low. This significantly reduces parasitic drag on the engine, directly translating to lower fuel consumption. Additionally, a disengaged fan is much quieter, contributing to a better cabin environment and reduced noise pollution on worksites.
By minimizing unnecessary fan operation, the 160802010008A reduces the constant load on the water pump bearing, drive belts, and tensioners. This leads to less wear and tear on these associated components, extending their service life and reducing the frequency of related maintenance. The balanced assembly also minimizes vibration, protecting other engine-mounted parts.
Recognizing a failing 160802010008A unit is crucial for preventing engine damage. The most common symptom is engine overheating, especially at low speeds or under load, indicating the fan is not engaging. Conversely, a fan that is constantly roaring at high speed, even when the engine is cold, signals a seized clutch, leading to power loss and high fuel consumption. Unusual grinding or wobbling noises from the fan area indicate bearing failure or an imbalance in the assembly. Visible signs include fluid leakage (silicone oil) from the clutch center or excessive play when you try to move the fan blades by hand (with the engine off and cool).
Ignoring these signs and not replacing the assembly with a genuine 160802010008A can lead to catastrophic engine overheating, resulting in warped cylinder heads, blown head gaskets, or even a seized engine. A seized clutch also puts immense strain on the water pump and drive belts, potentially causing their simultaneous failure. Timely replacement is far more economical than a major engine repair.
The 160802010008A Viscoil Assembly is largely maintenance-free, but regular inspections are vital. During routine service, visually inspect the assembly for any signs of oil leakage, cracks in the fan blades, or debris buildup between the blades and the clutch. With the engine cold and off, check for excessive axial or radial play by gently trying to move the fan. Listen for abnormal bearing noises during engine operation. Ensure the fan shroud is intact and properly positioned to direct airflow effectively.
Keep the radiator and condenser fins clean from bugs, dirt, and debris, as blocked airflow forces the 160802010008A to work harder and engage more frequently. Follow the manufacturer’s recommended coolant change intervals, as proper coolant mixture and condition affect the overall heat transfer efficiency of the system. Proactive observation helps identify issues before they lead to a failure that strands your truck.
The viscous fan assembly is a calibrated component. The engagement temperature, fluid viscosity, fan blade pitch, and balance are all engineered specifically for the cooling requirements and pulley speed of a particular SANY engine model. The genuine 160802010008A is the product of this precise engineering and testing. Aftermarket units often use generic calibrations that may engage too early, too late, or not provide adequate airflow, compromising engine cooling or efficiency.
Choosing the authentic SANY 160802010008A Viscoil Assembly With Impeller guarantees that every performance characteristic—from the thermostatic spring’s calibration to the fan’s airflow profile—matches the original design. It ensures material quality for durability and comes with the manufacturer’s assurance of fit and function. For operations where engine reliability and fuel costs are critical, the genuine 160802010008A is the only choice that delivers guaranteed cooling performance and long-term value.
If you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
