- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
OEM VG14050048 The rocker arm is a critical valvetrain component that transmits camshaft motion to open and close engine valves with precise timing. The genuine SINOTRUK HOWO VG14050048 Rocker Arm is an OEM‑grade component engineered for a perfect fit and long‑term durability. As a vital element of the trusted Sinotruk howo parts family, this rocker arm is crafted from high-strength, anti-corrosion steel and reinforced alloys to bear heavy loads, resist wear, and stand up to harsh engine conditions—effectively supporting key valvetrain components like valves, pushrods, and bridges to ensure consistent engine performance even during heavy-load or long-distance operations.
The VG14050048 is forged from premium steel with reinforced alloys, providing exceptional strength to withstand high cylinder pressures and repeated stress.
The rocker arm shaft bore and valve tip contact pad are machined to tight tolerances, ensuring smooth, friction-reduced motion and long life.
Special surface treatment protects against oxidation and wear, ensuring consistent performance in harsh engine environments.
Induction hardening of critical areas provides resistance to fatigue and deformation under high-temperature operation.
| Parameter | Specification | Details |
|---|---|---|
| OEM Part Number | VG14050048 | SINOTRUK HOWO Original |
| Product Name | Rocker Arm | Valve train lever |
| Material | Alloy steel (20CrMo or equivalent) | Forged, heat treated |
| Hardness (HRC) | 48-52 (pad area) | Induction hardened |
| Center Distance (bore to pad) | 52.5 mm | Precision ground |
| Shaft Bore Diameter | 22.0 mm (H7 tolerance) | For rocker shaft |
| Valve Tip Pad Width | 12 mm | Contact area |
| Weight (approx.) | 0.85 kg | Per arm |
| Lubrication Type | Pressurized oil via shaft | Drilled passages |
| Compatible Engines | SINOTRUK WD615, WD618 series | Euro II, III, IV |
The rocker arm is a key component in the valve train, responsible for translating camshaft motion into precise valve opening and closing. A worn or failed VG14050048 rocker arm can lead to loss of power, rough idling, increased emissions, and even catastrophic engine damage if a valve collides with a piston. The genuine SINOTRUK HOWO rocker arm is engineered with high-strength, anti-corrosion steel and reinforced alloys to bear heavy loads, resist wear, and stand up to harsh engine conditions, ensuring consistent performance and long service life.
The VG14050048 is produced using precision forging followed by CNC machining, ensuring every dimension meets strict tolerances for proper valve lash adjustment and smooth operation.
Every batch undergoes strict testing against international standards (e.g., ISO, CE) and Sinotruk’s original specs. We use premium materials and precision manufacturing to make parts resistant to wear and deliver long-lasting performance.
The development of the VG14050048 Rocker Arm focused on providing a durable and reliable valve actuation under the most severe engine conditions. These arms are subjected to millions of cycles of high stress and temperature. A failed rocker arm can cause expensive downtime and repairs. This genuine component is engineered to maintain its precision and strength for hundreds of thousands of kilometers.
The metallurgy of the VG14050048 starts with a high-strength alloy steel forging. After rough machining, critical areas such as the valve tip pad and pivot bore undergo induction hardening to achieve a tough, wear-resistant surface while retaining a ductile core. The rocker arm is then finish-ground to ensure precise geometry and low friction.
Quality control for the VG14050048 is exhaustive. In addition to 100% dimensional inspection, sample rocker arms are tested for surface hardness, case depth, and fatigue strength. They are also subjected to dynamic engine testing to verify long-term reliability. Only components that pass all these rigorous checks are approved for shipment as genuine Sinotruk Howo parts.
A failing rocker arm can cause a range of issues. Symptoms include a ticking noise from the valve cover, loss of engine power, rough running, or illuminated check engine light due to valve timing errors. During regular maintenance, the rocker arms should be inspected for any signs of wear on the pad, shaft bore, or adjuster screw. If any issues are found, immediate replacement with a genuine VG14050048 rocker arm is recommended to prevent further damage to the camshaft, valves, or pistons.
Installation requires mechanical expertise. The old rocker arm is removed after taking off the valve cover and rocker shaft assembly. The new VG14050048 is installed on the shaft, and valve lash must be carefully adjusted according to engine specifications. Proper torque of the rocker shaft bolts is critical.
Field performance of the VG14050048 rocker arm has proven its exceptional reliability. In a study of 100 Howo trucks operating in heavy-haul conditions, none showed signs of rocker arm wear before 500,000 km. This reliability translates directly to reduced downtime and lower operating costs for fleet operators.
For parts managers, the VG14050048 rocker arms are available individually or in sets, each with a lot traceability label. Bulk orders (10+ units) receive additional packaging discounts and priority handling. The arms are packaged in rust-inhibiting paper and foam-lined cartons to prevent transit damage.
Warranty and support for the VG14050048 are comprehensive. SINOTRUK HOWO provides a 2‑year/unlimited mileage warranty against manufacturing defects. Our technical support team is available via email to answer any questions regarding installation or compatibility, and we are committed to providing a response within 24 hours.
When ordering, always verify your engine model and rocker arm position (intake/exhaust, cylinder number). The VG14050048 is designed for specific applications within the WD615 engine family. Using the correct part ensures a perfect fit and optimal performance.
In summary, the VG14050048 Rocker Arm is a vital component for ensuring the power, efficiency, and longevity of your SINOTRUK HOWO truck’s engine. Its premium materials, precision manufacturing, and rigorous testing make it the preferred choice for valve train components. Trust the genuine VG14050048 – it keeps your engine breathing right.
Inspect rocker arms during every valve lash adjustment. Look for scoring on the pad or shaft bore. Always replace rocker arms in sets if wear is noticed. Use only genuine VG14050048 for replacement to ensure correct geometry and durability.
Generic aftermarket rocker arms often have poor metallurgy, inaccurate dimensions, or inadequate heat treatment, leading to rapid wear and failure. The genuine VG14050048 is engineered to exact specifications with premium materials, ensuring a perfect fit and reliable performance, backed by factory-direct prices and customization options if needed.
Generic aftermarket rocker arms often have poor metallurgy, inaccurate dimensions, or inadequate heat treatment, leading to rapid wear, excessive valve lash variation, and premature failure. The genuine SINOTRUK HOWO VG14050048 Rocker Arm is engineered to the exact specifications of your truck’s engine. It is manufactured under strict quality controls, undergoing rigorous testing against international standards (e.g., ISO, CE) and Sinotruk’s original specs. Using premium materials and precision manufacturing ensures it withstands the extreme demands of heavy‑duty operation, delivering consistent performance and long life. This commitment to quality, combined with options for customization and small order acceptance, makes it the smart choice for maintaining your Howo truck.
By choosing the authentic part, you protect your investment and ensure your engine performs reliably for years to come. For fleet managers and owner‑operators who demand the best, the genuine VG14050048 is the only responsible choice.
VG14050048 – 100% Genuine SINOTRUK HOWO Rocker Arm • Power your engine with confidence • No forms, just quality parts.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
