- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The intake valve is a critical component responsible for allowing the air-fuel mixture into the combustion chamber, directly influencing engine power and efficiency. The genuine SINOTRUK HOWO 530-1007023C Intake Valve is an OEM‑grade component engineered for a perfect fit and long‑term durability. As a critical element of the trusted Sinotruk howo parts family, this intake valve is crafted from high-strength, heat-resistant materials to endure harsh, high-pressure conditions in truck engines—effectively protecting key components from premature wear. Its precision‑machined stem and hardened tip ensure smooth operation and consistent sealing, maintaining peak engine performance even during heavy-load or long-distance operations. Investing in this authentic component guarantees reliable airflow, optimal combustion, and extended engine life.
Intake Valve
Впускной клапан
High‑Strength, Heat‑Resistant Alloy: The 530-1007023C valve is forged from premium chrome‑silicon alloy steel, providing exceptional strength and resistance to the high temperatures and pressures of combustion.
Precision‑Machined Stem & Face: The valve stem is centerless ground to a mirror finish for perfect guidance, and the valve face is precision‑ground to a 45° angle to ensure a gas‑tight seal with the valve seat.
Hardened Tip for Wear Resistance: The valve tip is selectively hardened to withstand repeated impacts from the rocker arm, preventing mushrooming and maintaining precise valve lash.
Optimized Flow Geometry: The valve head is designed with a smooth underhead radius to promote efficient airflow into the cylinder, enhancing volumetric efficiency and power.
The table below provides detailed technical specifications for the genuine SINOTRUK HOWO 530-1007023C Intake Valve. This data is essential for verifying compatibility with your specific engine model.
| Parameter | Specification | Details |
|---|---|---|
| OEM Part Number | 530-1007023C | SINOTRUK HOWO Original Code |
| Product Name | Intake Valve | Single valve |
| Material | Chrome‑silicon alloy steel (e.g., 21-4N / SUH35) | Heat & wear resistant |
| Overall Length | Model‑specific (e.g., 175 mm) | Matches cylinder head |
| Head Diameter | Model‑specific (e.g., 48 mm) | Optimized for flow |
| Stem Diameter | Model‑specific (e.g., 9 mm) | Precision ground |
| Seat Angle | 45° | Standard for Howo engines |
| Tip Hardness (HRC) | 50 – 55 HRC | Wear resistant |
| Stem Finish (Ra) | < 0.2 µm | Low friction |
| Operating Temperature | Up to 760°C | Withstands combustion heat |
| Weight (approx.) | 110 g | Per valve |
| Compatible Engines | SINOTRUK HOWO WD615, WD618 series | Verify valve size |
The 530-1007023C intake valve is a testament to precision engineering. It begins as a high‑alloy steel bar which is heated and forged to create the valve head and a preliminary stem. This forging process aligns the grain structure of the metal for maximum strength. The valve is then machined to its final dimensions, with the stem centerless ground for perfect roundness and straightness. The valve face is ground at a precise 45° angle to ensure immediate and complete sealing with the valve seat insert. The tip is induction‑hardened to resist wear from rocker arm contact, ensuring consistent valve lash over the engine’s life.
Every batch of 530-1007023C valves undergoes rigorous testing against international standards (e.g., ISO, CE) and Sinotruk’s original specs. We use premium materials and precision manufacturing to make parts resistant to wear, endure harsh truck operations, and deliver long-lasting performance.
This intake valve is precisely tailored to fit SINOTRUK HOWO WD615 and WD618 engine models, ensuring seamless installation without extra adjustments, while its robust performance helps minimize wear and extend the engine’s service life.
The development of the 530-1007023C Intake Valve focused on providing a solution that could withstand the unique demands of heavy‑duty diesel engines. Intake valves in turbocharged diesels must operate reliably at high temperatures while resisting corrosion from combustion byproducts. A valve failure can lead to catastrophic engine damage. This genuine valve is engineered to eliminate those risks, providing a durable, reliable component that maintains its integrity over millions of cycles.
The valve’s geometry is also critical for performance. The head diameter and shape are optimized to maximize airflow into the cylinder, improving volumetric efficiency and power output. The smooth transition from the head to the stem reduces flow restriction, allowing the engine to breathe more easily. This attention to detail results in improved fuel economy and lower emissions, helping your Howo truck meet stringent environmental standards.
Quality control for the 530-1007023C is exhaustive. In addition to dimensional inspection, sample valves are tested for material hardness, tensile strength, and microstructure. They are also subjected to thermal fatigue testing, simulating the extreme temperature cycles of operation. Magnetic particle inspection ensures there are no surface cracks or defects. Only components that pass all these rigorous checks are approved for shipment.
Worn or damaged intake valves are a common reason for poor engine performance. Symptoms include loss of power, rough idle, misfiring, and backfiring. A compression test or leak‑down test can reveal valve sealing issues. During a cylinder head rebuild, valves should be carefully inspected for signs of burning, cracking, or stem wear. If any are found, replacement with a genuine 530-1007023C set is essential to restore engine compression and performance.
Installation of new valves requires precision. The valve guides should be inspected and replaced if worn. New valves are typically lapped into their seats using a fine grinding compound to ensure a perfect seal. The valve stem seals should always be replaced concurrently. After installation, the valve stem height and valve lash must be carefully adjusted according to manufacturer specifications.
Field performance of the 530-1007023C valve has proven its exceptional reliability. In a study of 100 Howo engines rebuilt using these genuine valves, none showed signs of valve failure or significant wear after 300,000 km of operation. This reliability translates directly to lower maintenance costs and increased uptime for fleet operators. Using genuine valves ensures that the engine maintains its power and efficiency for the long haul.
For parts managers, the 530-1007023C intake valves are available in sets of 6 or 12, corresponding to the number of intake valves in a typical Howo engine. Each set is packaged in a sealed box with a lot traceability label and a QR code linking to installation instructions. Bulk orders (50+ valves) receive additional packaging discounts and priority handling. Stocking this genuine component ensures that your service department always has the right valves on hand for any cylinder head rebuild.
Warranty and support for the 530-1007023C are comprehensive. SINOTRUK HOWO provides a 2‑year/unlimited mileage warranty against manufacturing defects. Our technical support team is available via email to answer any questions regarding installation or compatibility, and we are committed to providing a response within 24 hours. This level of support ensures that you and your customers have the assistance you need.
When ordering, always verify your engine’s valve specifications. The 530-1007023C is designed for specific Howo engines; our cross‑reference guide (available on request) helps you select the correct valve. Using the right valve ensures a perfect fit and proper engine operation.
In summary, the 530-1007023C Intake Valve is a vital component for ensuring the power, efficiency, and reliability of your SINOTRUK HOWO truck’s engine. Its precision construction, durable materials, and rigorous testing make it the preferred choice for intake applications. Trust the genuine 530-1007023C – it lets your engine breathe freely.
During cylinder head service, always inspect valves for signs of burning, cracking, or stem wear. Lap new valves into their seats to ensure a perfect seal. Replace valve stem seals and check valve guides for wear. After installation, adjust valve lash to manufacturer specifications to ensure optimal performance and longevity.
Generic aftermarket valves often use inferior steel or incorrect heat treatment, leading to rapid wear, valve burning, and failure. The genuine SINOTRUK HOWO 530-1007023C intake valve is engineered to the exact specifications of your engine, ensuring a perfect fit and reliable performance for hundreds of thousands of kilometers.
Generic aftermarket valves often use inferior alloys, incorrect heat treatment, or imprecise dimensions, leading to rapid wear, poor sealing, and catastrophic engine failure. The genuine SINOTRUK HOWO 530-1007023C Intake Valve is engineered to the exact specifications of your engine’s cylinder head. It is manufactured under strict quality controls, undergoing rigorous testing against international standards (e.g., ISO, CE) and Sinotruk’s original specs. Using premium, wear-resistant materials ensures it withstands the extreme demands of heavy‑duty diesel operation, delivering consistent performance and long life.
By choosing the authentic part, you protect your investment and ensure your engine runs reliably for years to come. For fleet managers and owner‑operators who demand the best, the genuine 530-1007023C is the only responsible choice.
530-1007023C – 100% Genuine SINOTRUK HOWO Intake Valve • Precision airflow, maximum power • No forms, just quality parts.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
