- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The WG9000361008 Retaining Ring Ng12 is a precision chassis fastening component built for SINOTRUK Howo trucks, providing a secure shoulder that holds bearings, shafts, gears and seals in their correct position. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade retaining ring as a direct replacement for the factory original. The WG9000361008 ring ensures correct seating, reliable retention and dependable operation on Howo A7, T7H, HOWO 371 and HOWO 380 models.
Manufactured from high-strength spring steel with a corrosion-resistant finish and precision-formed lugs, the Retaining Ring Ng12 is made to exact OEM dimensions. Its rigid construction maintains correct spring tension, resists vibration, road salt, water and temperature extremes, and performs reliably in constant commercial truck service.
OEM WG9000361008 • Retaining ring Ng12 • Spring steel • Corrosion resistant • Direct OEM fit
The WG9000361008 Retaining Ring Ng12 is a circular spring-steel fastener that snaps into a machined groove on a shaft or inside a bore. Once seated, it creates a raised shoulder that prevents bearings, gears, seals or collars from sliding out of position.
This WG9000361008 ring is formed and heat-treated to exact OEM dimensions. Inner diameter, outer diameter, thickness, lug shape and spring tension all match the factory specification, so it seats correctly in the groove and holds firmly under load.
Common signs that a retaining ring needs replacement include visible cracks or breaks at the lugs, a ring that has lost its spring tension, corrosion or pitting on the surface, a ring that has popped out of its groove, and abnormal movement or noise from the retained component.
Fitting a new WG9000361008 Retaining Ring Ng12 restores secure component retention, correct end-play and reliable operation. It is a small, low-cost part that plays a critical role in chassis and driveline reliability.
The WG9000361008 Retaining Ring Ng12 fits SINOTRUK Howo trucks, mainly the A7, T7H, HOWO 371 and HOWO 380 series. It is a direct OE replacement, so it snaps into the original machined groove and works with the factory shaft, bore and retained components.
This retaining ring is used in long-haul transport, construction, mining, logging and municipal service. In these roles, it must hold bearings, gears, seals and collars securely despite vibration, heat, dust, mud, water and heavy load.
When fitting the WG9000361008, inspect the groove, shaft, bore and retained components for wear, burrs or corrosion. A damaged groove or worn shaft can prevent a new ring from seating correctly, so checking these areas saves time and avoids repeat repairs.
For fleets running multiple HOWO trucks, keeping the Retaining Ring Ng12 in stock makes chassis and driveline repairs faster and more predictable, reducing downtime and keeping vehicles on the road.
Replacing the WG9000361008 Retaining Ring Ng12 is a job for a qualified technician using retaining ring pliers. Clean the work area first so dirt cannot enter the assembly. Support the shaft or housing securely before removing the old ring.
Use the correct pliers to spread or compress the old ring and lift it out of the groove. Inspect the groove for wear, burrs or corrosion, and check the retained component for correct fit and alignment. Clean the groove thoroughly.
Position the new WG9000361008 ring in the groove and use the pliers to seat it fully and evenly. Confirm that the ring is properly engaged around its full circumference before releasing the pliers. Check that the retained component moves freely without excess play.
Reassemble the surrounding parts and road test the truck to confirm quiet, stable operation. During routine service, inspect the retaining ring for cracks, corrosion or loss of tension and replace it whenever the assembly is opened for other repairs.
The WG9000361008 Retaining Ring Ng12 is produced in an ISO 9001-certified plant using high-strength spring steel and a corrosion-resistant finish. Incoming steel is checked for hardness, dimensions and surface quality before forming begins.
Each ring is stamped, formed and heat-treated on precision equipment, then inspected for inner diameter, outer diameter, thickness, lug shape and spring tension. Every batch is dimensionally checked, and samples receive a fit and tension test before packing.
Batch samples undergo salt spray, thermal cycling, vibration and fatigue testing to confirm long-term retention reliability in heavy-duty truck use. These checks help ensure the retaining ring performs in the tough conditions Howo trucks face every day.
The WG9000361008 is covered by a 12-month warranty against material and workmanship defects. Strict quality control means every retaining ring matches the fit, function and durability of the original factory part.
The WG9000361008 Retaining Ring Ng12 helps maintain secure component retention, correct end-play and reliable chassis operation on your Howo truck. A worn or broken ring can allow bearings, gears or seals to shift, causing noise, leaks and expensive damage.
Made from quality spring steel with a corrosion-resistant finish, the WG9000361008 offers dependable retention performance and long service life. Its exact OEM dimensions keep installation simple and work with the factory machined groove.
Fleet managers gain shorter repair times, lower maintenance costs and better vehicle availability. Owner-operators get confidence from a retaining ring that meets strict OEM standards and is backed by a 12-month warranty.
Choose the WG9000361008 Retaining Ring Ng12 for your SINOTRUK Howo and keep your chassis components held firmly and reliably for the long haul.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
