- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The 712W25456-6802 Steering Angle Sensor Adapter Harness is a premium, heavy-duty chassis electrical component engineered specifically for SINOTRUK Howo trucks, delivering reliable signal transmission between the steering angle sensor and the vehicle stability control system. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade adapter harness as a direct replacement for the original factory unit. The 712W25456-6802 harness ensures correct pin mapping, stable communication with the ABS/ESP ECU and dependable operation on Howo A7, T7H and related heavy-duty models.
Manufactured from high-strand shielded copper conductors, flexible thermoplastic insulation and a reinforced PVC outer jacket, the 712W25456-6802 Steering Angle Sensor Adapter Harness is built to exact OEM dimensions. Its robust construction resists vibration, abrasion, oil, water and electromagnetic interference, delivering dependable performance under the constant flexing and electrical loads of commercial truck operation.
OEM 712W25456-6802 • Steering angle signal • Shielded cable • Sealed connectors • Direct OEM fit
The 712W25456-6802 Steering Angle Sensor Adapter Harness is a critical electrical interface in the chassis system of SINOTRUK Howo trucks. It carries the steering angle signal from the sensor mounted on the steering column to the ABS/ESP electronic control unit, enabling stability control, traction control and hill-start assist functions.
This 712W25456-6802 harness is precision-manufactured to exact OEM dimensions. The conductors are shielded to protect the low-voltage sensor signal from electromagnetic interference, the insulation is formulated for extreme temperatures, and the molded connectors are sealed against dust and moisture.
Common signs that a steering angle sensor adapter harness needs replacement include an illuminated ESP or ABS warning lamp, loss of stability control, fault codes for steering angle signal, intermittent or erratic sensor readings, and visible damage to the outer jacket or connectors.
Whether you are repairing a faulty stability control system, replacing a damaged harness or carrying out preventive maintenance on a fleet of Howo trucks, the 712W25456-6802 Steering Angle Sensor Adapter Harness delivers the quality, reliability and durability that SINOTRUK Howo professionals expect.
The 712W25456-6802 Steering Angle Sensor Adapter Harness is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 371 and HOWO 380 series equipped with ABS/ESP. It is a direct OE replacement, so it connects to the factory steering angle sensor and control unit without modification.
This harness is essential in applications where vehicle stability and steering response are critical, such as long-haul transport, construction, mining and municipal service. In these duties, the harness must deliver stable signal transmission without interference and resist vibration, flexing, heat and contamination.
When replacing the adapter harness, it is recommended to inspect the steering angle sensor, ABS/ESP ECU, steering column wiring and nearby connectors for wear or damage. The 712W25456-6802 is designed to work with the factory stability control system, ensuring correct signal calibration and reliable operation.
For fleets with multiple HOWO trucks, standardising on the 712W25456-6802 Steering Angle Sensor Adapter Harness simplifies electrical repair inventory and ensures the correct harness is available for scheduled maintenance or emergency repairs.
Replacing the 712W25456-6802 Steering Angle Sensor Adapter Harness is a simple procedure that requires basic electrical knowledge and hand tools. This work should be performed by a qualified technician. Begin by disconnecting the battery negative terminal to prevent accidental short circuits.
Locate the adapter harness between the steering angle sensor and the ABS/ESP ECU. Disconnect the old harness from both ends, taking note of the routing and any retaining clips. Withdraw the old harness and inspect the connectors for corrosion or damage.
Route the new 712W25456-6802 harness along the original path and secure it with the factory clips. Connect the plugs to the sensor and ECU until they click into place. Reconnect the battery and clear any fault codes using a diagnostic tool. Test the steering angle signal and stability control function.
For ongoing maintenance, periodically check that the harness is securely routed away from sharp edges and heat sources, and that the connectors are clean and dry. If the ESP warning lamp returns, inspect the sensor and ECU before replacing the harness again.
The 712W25456-6802 Steering Angle Sensor Adapter Harness is manufactured in an ISO 9001-certified facility using high-quality shielded copper conductors and automated crimping processes. Raw materials are sourced from certified suppliers and undergo incoming inspection for conductor resistance, shield coverage, insulation thickness and terminal plating.
Each harness is assembled on precision lines and then tested for continuity, insulation resistance, shield integrity and high-potential withstand. The terminals are pull-tested to ensure secure crimps, and the outer jacket is inspected for correct fit and finish. Every unit is subjected to a functional signal test before packing.
Random samples from each production batch undergo environmental testing, including thermal cycling, vibration, salt spray and fluid exposure, to validate long-term reliability in heavy-duty truck applications. These tests ensure the harness continues to perform in the harsh conditions experienced by SINOTRUK Howo vehicles.
We back the 712W25456-6802 with a comprehensive 12-month warranty against material and workmanship defects. Our rigorous quality control ensures that every steering angle sensor adapter harness delivers the same fit, function and durability as the original factory component.
The 712W25456-6802 Steering Angle Sensor Adapter Harness is a vital component for maintaining vehicle stability, steering safety and driver confidence on your Howo truck. A faulty harness causes ESP/ABS warning lamps, loss of stability control and potential handling risks, especially in emergency manoeuvres.
Manufactured from high-quality shielded copper with heat-resistant insulation and sealed connectors, the 712W25456-6802 offers outstanding reliability, EMI protection and long-term durability. Its direct-fit design ensures straightforward installation and immediate compatibility with the factory stability control system.
Fleet operators benefit from reduced electronic downtime, lower maintenance costs and improved vehicle safety. Owner-operators gain peace of mind knowing their steering angle signal is transmitted reliably, backed by a comprehensive warranty.
Order the 712W25456-6802 Steering Angle Sensor Adapter Harness today and keep your SINOTRUK Howo driving safely for years to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
