- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The 752-25456-0001 Under-Vehicle Start/Stop Auxiliary Wiring Harness is a premium, heavy-duty chassis electrical component engineered specifically for SINOTRUK Howo trucks, delivering reliable remote start/stop control and auxiliary power distribution for under-vehicle equipment. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade auxiliary harness as a direct replacement for the original factory unit. The 752-25456-0001 harness ensures correct pin mapping, stable electrical connection and dependable operation on Howo A7, T7H and related heavy-duty models.
Manufactured from high-strand copper conductors, flexible thermoplastic insulation and a reinforced PVC outer jacket, the 752-25456-0001 Under-Vehicle Start/Stop Auxiliary Wiring Harness is built to exact OEM dimensions. Its robust construction resists vibration, abrasion, oil, water and temperature extremes, delivering dependable performance under the constant flexing and electrical loads of commercial truck operation.
OEM 752-25456-0001 • Start/stop auxiliary • Sealed connectors • Vibration resistant • Direct OEM fit
The 752-25456-0001 Under-Vehicle Start/Stop Auxiliary Wiring Harness is a critical electrical component in the chassis system of SINOTRUK Howo trucks. It provides the connection between the under-vehicle start/stop control unit and the main chassis harness, enabling remote engine control and auxiliary power supply for equipment mounted below the cab.
This 752-25456-0001 harness is precision-manufactured to exact OEM dimensions. The copper conductors are stranded for flexibility, the insulation is formulated for extreme temperatures, and the molded connectors are sealed against dust and moisture. The harness includes all necessary terminals and locking features for the under-vehicle environment.
Common signs that an auxiliary wiring harness needs replacement include remote start/stop failure, intermittent auxiliary power, blown fuses, visible damage to the outer jacket, corroded or bent pins, and fault codes in the body control module. Fitting a new 752-25456-0001 harness restores correct auxiliary control and power distribution.
Whether you are repairing a faulty auxiliary circuit, replacing a damaged harness or carrying out preventive maintenance on a fleet of Howo trucks, the 752-25456-0001 Under-Vehicle Start/Stop Auxiliary Wiring Harness delivers the quality, reliability and durability that SINOTRUK Howo professionals expect.
The 752-25456-0001 Under-Vehicle Start/Stop Auxiliary Wiring Harness is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 371 and HOWO 380 series. It is a direct OE replacement, so it connects to the factory control unit and chassis harness without modification.
This harness is essential in applications where remote start/stop and under-vehicle auxiliary power are critical, such as long-haul transport, construction, mining and municipal service. In these duties, the harness must deliver stable power and signals without interference and resist vibration, flexing, heat and contamination.
When replacing the auxiliary harness, it is recommended to inspect the start/stop control unit, main chassis harness, fuses, relays and nearby wiring for wear or damage. The 752-25456-0001 is designed to work with the factory electrical system, ensuring correct pin mapping and reliable auxiliary operation.
For fleets with multiple HOWO trucks, standardising on the 752-25456-0001 Under-Vehicle Start/Stop Auxiliary Wiring Harness simplifies electrical repair inventory and ensures the correct harness is available for scheduled maintenance or emergency repairs.
Replacing the 752-25456-0001 Under-Vehicle Start/Stop Auxiliary Wiring Harness is a simple procedure that requires basic electrical knowledge and hand tools. This work should be performed by a qualified technician. Begin by disconnecting the battery negative terminal to prevent accidental short circuits.
Locate the auxiliary harness under the vehicle near the start/stop control unit. Disconnect the old harness from the control unit and chassis harness, taking note of the routing and any retaining clips. Withdraw the old harness and inspect the connectors for corrosion or damage.
Route the new 752-25456-0001 harness along the original path and secure it with the factory clips. Connect the plugs to the control unit and chassis harness until they click into place. Reconnect the battery and test the start/stop function and auxiliary power output.
For ongoing maintenance, periodically check that the harness is securely routed away from sharp edges and heat sources, and that the connectors are clean and dry. If auxiliary functions become intermittent, inspect the control unit and fuses before replacing the harness again.
The 752-25456-0001 Under-Vehicle Start/Stop Auxiliary Wiring Harness is manufactured in an ISO 9001-certified facility using high-quality copper conductors and automated crimping processes. Raw materials are sourced from certified suppliers and undergo incoming inspection for conductor resistance, insulation thickness and terminal plating.
Each harness is assembled on precision lines and then tested for continuity, insulation resistance and high-potential withstand. The terminals are pull-tested to ensure secure crimps, and the outer jacket is inspected for correct fit and finish. Every unit is subjected to a functional signal test before packing.
Random samples from each production batch undergo environmental testing, including thermal cycling, vibration, salt spray and fluid exposure, to validate long-term reliability in heavy-duty truck applications. These tests ensure the harness continues to perform in the harsh conditions experienced by SINOTRUK Howo vehicles.
We back the 752-25456-0001 with a comprehensive 12-month warranty against material and workmanship defects. Our rigorous quality control ensures that every under-vehicle start/stop auxiliary wiring harness delivers the same fit, function and durability as the original factory component.
The 752-25456-0001 Under-Vehicle Start/Stop Auxiliary Wiring Harness is a vital component for maintaining reliable remote start/stop control, auxiliary power and operational efficiency on your Howo truck. A faulty harness causes failed remote control, lost auxiliary power and unnecessary downtime, especially when under-vehicle equipment is needed.
Manufactured from high-quality copper with heat-resistant insulation and sealed connectors, the 752-25456-0001 offers outstanding reliability, corrosion resistance and long-term durability. Its direct-fit design ensures straightforward installation and immediate compatibility with the factory auxiliary control system.
Fleet operators benefit from reduced electrical downtime, lower maintenance costs and improved vehicle availability. Owner-operators gain peace of mind knowing their auxiliary start/stop and power systems are reliable and backed by a comprehensive warranty.
Order the 752-25456-0001 Under-Vehicle Start/Stop Auxiliary Wiring Harness today and keep your SINOTRUK Howo auxiliary systems performing reliably for years to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
