- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The AZ9725776405 Brake Pad Wear Warning Chassis Harness (4X2/N60) is a premium, heavy-duty chassis electrical component engineered specifically for SINOTRUK Howo trucks, delivering reliable brake pad wear monitoring and timely warning signals to the driver. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade warning harness as a direct replacement for the original factory unit. The AZ9725776405 harness ensures correct sensor signal transmission, stable communication with the brake ECU and dependable operation on Howo A7, T7H and related 4X2 models.
Manufactured from high-strand copper conductors, flexible thermoplastic insulation and a reinforced PVC outer jacket, the AZ9725776405 Brake Pad Wear Warning Chassis Harness is built to exact OEM dimensions. Its robust construction resists vibration, abrasion, oil, water and temperature extremes, delivering dependable performance under the constant flexing and electrical loads of commercial truck operation.
OEM AZ9725776405 • 4X2/N60 configuration • Sealed connectors • Vibration resistant • Direct OEM fit
The AZ9725776405 Brake Pad Wear Warning Chassis Harness (4X2/N60) is a critical safety component in the chassis system of SINOTRUK Howo trucks. It connects the brake pad wear sensors to the brake ECU, transmitting wear signals that trigger a dashboard warning when pads reach their service limit.
This AZ9725776405 harness is precision-manufactured to exact OEM dimensions. The copper conductors are stranded for flexibility, the insulation is formulated for extreme temperatures, and the molded connectors are sealed against dust and moisture. The 4X2/N60 configuration matches the factory routing exactly.
Common signs that a brake pad wear warning harness needs replacement include a persistent brake warning lamp, intermittent wear warnings, fault codes in the brake ECU, visible damage to the outer jacket, and corroded or bent pins. Fitting a new AZ9725776405 harness restores correct wear monitoring and brake safety.
Whether you are repairing a faulty wear warning circuit, replacing a damaged harness or carrying out preventive maintenance on a fleet of Howo trucks, the AZ9725776405 Brake Pad Wear Warning Chassis Harness delivers the quality, reliability and durability that SINOTRUK Howo professionals expect.
The AZ9725776405 Brake Pad Wear Warning Chassis Harness is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 371 and HOWO 380 4X2 series. It is a direct OE replacement, so it connects to the factory wear sensors and brake ECU without modification.
This harness is essential in applications where brake safety and wear monitoring are critical, such as long-haul transport, construction, mining and municipal service. In these duties, the harness must deliver stable wear signals without interference and resist vibration, flexing, heat and contamination.
When replacing the wear warning harness, it is recommended to inspect the brake pad sensors, brake ECU, main chassis harness and nearby wiring for wear or damage. The AZ9725776405 is designed to work with the factory braking system, ensuring correct signal timing and reliable wear warning.
For fleets with multiple HOWO trucks, standardising on the AZ9725776405 Brake Pad Wear Warning Chassis Harness simplifies brake repair inventory and ensures the correct harness is available for scheduled maintenance or emergency repairs.
Replacing the AZ9725776405 Brake Pad Wear Warning Chassis Harness is a simple procedure that requires basic electrical knowledge and hand tools. This work should be performed by a qualified technician. Begin by disconnecting the battery negative terminal to prevent accidental short circuits.
Locate the warning harness along the chassis near the brake calipers. Disconnect the old harness from the wear sensors and the brake ECU, taking note of the routing and any retaining clips. Withdraw the old harness and inspect the connectors for corrosion or damage.
Route the new AZ9725776405 harness along the original path and secure it with the factory clips. Connect the plugs to the wear sensors and brake ECU until they click into place. Reconnect the battery and clear any fault codes using a diagnostic tool. Test the brake warning lamp function.
For ongoing maintenance, periodically check that the harness is securely routed away from sharp edges and heat sources, and that the connectors are clean and dry. If the brake warning becomes intermittent, inspect the sensors and ECU before replacing the harness again.
The AZ9725776405 Brake Pad Wear Warning Chassis Harness is manufactured in an ISO 9001-certified facility using high-quality copper conductors and automated crimping processes. Raw materials are sourced from certified suppliers and undergo incoming inspection for conductor resistance, insulation thickness and terminal plating.
Each harness is assembled on precision lines and then tested for continuity, insulation resistance and high-potential withstand. The terminals are pull-tested to ensure secure crimps, and the outer jacket is inspected for correct fit and finish. Every unit is subjected to a functional signal test before packing.
Random samples from each production batch undergo environmental testing, including thermal cycling, vibration, salt spray and fluid exposure, to validate long-term reliability in heavy-duty truck applications. These tests ensure the harness continues to perform in the harsh conditions experienced by SINOTRUK Howo vehicles.
We back the AZ9725776405 with a comprehensive 12-month warranty against material and workmanship defects. Our rigorous quality control ensures that every brake pad wear warning chassis harness delivers the same fit, function and durability as the original factory component.
The AZ9725776405 Brake Pad Wear Warning Chassis Harness is a vital component for maintaining brake safety, timely wear warnings and vehicle uptime on your Howo truck. A faulty harness causes missed wear warnings, unnecessary brake inspections and potential safety risks.
Manufactured from high-quality copper with heat-resistant insulation and sealed connectors, the AZ9725776405 offers outstanding reliability, corrosion resistance and long-term durability. Its direct-fit design ensures straightforward installation and immediate compatibility with the factory braking system.
Fleet operators benefit from reduced brake maintenance downtime, lower costs and improved vehicle safety. Owner-operators gain peace of mind knowing their brake pad wear is monitored reliably, backed by a comprehensive warranty.
Order the AZ9725776405 Brake Pad Wear Warning Chassis Harness today and keep your SINOTRUK Howo braking safely for years to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
