- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The WG2209280041 AMT Wiring Harness (10-Speed Transmission) (New Process) is a premium, heavy-duty chassis electrical component engineered specifically for SINOTRUK Howo trucks, delivering reliable power and signal transmission for the automated manual transmission control system. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade AMT wiring harness as a direct replacement for the original factory unit. The WG2209280041 harness ensures correct pin mapping, stable communication with the transmission control unit and dependable operation on Howo A7, T7H and related heavy-duty models equipped with 10-speed AMT.
Manufactured from high-strand copper conductors, heat-resistant thermoplastic insulation and a reinforced outer jacket, the WG2209280041 AMT Wiring Harness is built to exact OEM dimensions. Its robust construction resists vibration, abrasion, oil, water and temperature extremes, delivering dependable performance under the constant flexing and electrical loads of commercial truck operation.
OEM WG2209280041 • 10-speed AMT • New Process • Sealed connectors • Direct OEM fit
The WG2209280041 AMT Wiring Harness (10-Speed Transmission) (New Process) is a critical electrical link in the chassis system of SINOTRUK Howo trucks. It connects the transmission control unit, clutch actuator, gear selector, speed sensors and various transmission sensors to the main vehicle harness, ensuring reliable communication and power delivery for the automated manual transmission.
This WG2209280041 harness is precision-manufactured to exact OEM dimensions. The copper conductors are stranded for flexibility, the insulation is formulated for extreme temperatures, and the molded connectors are sealed against dust and moisture. The New Process configuration matches the updated 10-speed AMT layout and factory routing exactly.
Common signs that an AMT wiring harness needs replacement include transmission fault codes, failure to shift, rough gear engagement, loss of communication with the TCU, intermittent sensor readings, blown fuses and visible damage to the outer jacket or connectors. Fitting a new WG2209280041 harness restores correct transmission operation and reliable gear changes.
Whether you are repairing a faulty AMT circuit, replacing a damaged harness or carrying out preventive maintenance on a fleet of Howo trucks, the WG2209280041 AMT Wiring Harness delivers the quality, reliability and durability that SINOTRUK Howo professionals expect.
The WG2209280041 AMT Wiring Harness is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 371 and HOWO 380 series equipped with the 10-speed automated manual transmission. It is a direct OE replacement, so it connects to the factory transmission control unit, clutch actuator, gear selector and speed sensors without modification.
This harness is essential in applications where reliable transmission operation and smooth gear changes are critical, such as long-haul transport, construction, mining and municipal service. In these duties, the harness must deliver stable power and signals without interference and resist vibration, flexing, heat and contamination.
When replacing the AMT wiring harness, it is recommended to inspect the transmission control unit, clutch actuator, gear selector, speed sensors, main chassis harness and nearby connectors for wear or damage. The WG2209280041 is designed to work with the factory transmission system, ensuring correct pin mapping and reliable operation.
For fleets with multiple HOWO trucks, standardising on the WG2209280041 AMT Wiring Harness simplifies transmission repair inventory and ensures the correct harness is available for scheduled maintenance or emergency repairs.
Replacing the WG2209280041 AMT Wiring Harness is a moderately simple procedure that requires basic electrical knowledge and hand tools. This work should be performed by a qualified technician. Begin by disconnecting the battery negative terminal to prevent accidental short circuits.
Locate the AMT harness along the chassis near the transmission. Disconnect the old harness from the transmission control unit, clutch actuator, gear selector, speed sensors and main chassis harness, taking note of the routing and any retaining clips. Withdraw the old harness and inspect the connectors for corrosion or damage.
Route the new WG2209280041 harness along the original path and secure it with the factory clips. Connect each plug to its respective component until it clicks into place. Reconnect the battery and clear any fault codes using a diagnostic tool. Test the transmission through its full range of gears.
For ongoing maintenance, periodically check that the harness is securely routed away from sharp edges and heat sources, and that all connectors are clean and dry. If transmission faults recur, inspect the TCU and sensors before replacing the harness again.
The WG2209280041 AMT Wiring Harness is manufactured in an ISO 9001-certified facility using high-quality copper conductors and automated crimping processes. Raw materials are sourced from certified suppliers and undergo incoming inspection for conductor resistance, insulation thickness and terminal plating.
Each harness is assembled on precision lines and then tested for continuity, insulation resistance and high-potential withstand. The terminals are pull-tested to ensure secure crimps, and the outer jacket is inspected for correct fit and finish. Every unit is subjected to a functional signal test before packing.
Random samples from each production batch undergo environmental testing, including thermal cycling, vibration, salt spray and fluid exposure, to validate long-term reliability in heavy-duty truck applications. These tests ensure the harness continues to perform in the harsh conditions experienced by SINOTRUK Howo vehicles.
We back the WG2209280041 with a comprehensive 12-month warranty against material and workmanship defects. Our rigorous quality control ensures that every AMT wiring harness delivers the same fit, function and durability as the original factory component.
The WG2209280041 AMT Wiring Harness is a vital component for maintaining reliable transmission operation, smooth gear changes and vehicle uptime on your Howo truck. A faulty harness causes transmission faults, shifting problems and potential breakdowns, especially under heavy loads.
Manufactured from high-quality copper with heat-resistant insulation and sealed connectors, the WG2209280041 offers outstanding reliability, corrosion resistance and long-term durability. Its direct-fit design ensures straightforward installation and immediate compatibility with the factory AMT system.
Fleet operators benefit from reduced transmission downtime, lower maintenance costs and improved vehicle availability. Owner-operators gain peace of mind knowing their AMT system is powered by a harness that meets strict OEM standards and is backed by a comprehensive warranty.
Order the WG2209280041 AMT Wiring Harness (10-Speed Transmission) (New Process) today and keep your SINOTRUK Howo shifting smoothly for years to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
