- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The WG164282107415 Condenser Assembly (Shanghai Yida) is a high-performance, direct-fit air conditioning condenser designed specifically for SINOTRUK Howo heavy-duty trucks. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade condenser assembly as a direct replacement for the original factory component. The WG164282107415 condenser is the heart of the truck’s A/C system, responsible for converting high-pressure, hot refrigerant gas into a liquid state by dissipating heat through its advanced aluminum fin-and-tube design. Manufactured by Shanghai Yida, a recognized supplier of quality thermal management components, this condenser assembly ensures optimal cabin cooling, driver comfort, and system reliability under the most demanding operating conditions.
The WG164282107415 condenser assembly is a critical component for maintaining a comfortable and productive driving environment. A clogged, damaged, or leaking condenser can lead to reduced cooling performance, increased system pressure, and eventual compressor failure. This genuine OEM assembly restores full A/C system efficiency and ensures your HOWO truck’s cabin remains cool and comfortable.
OEM direct replacement • High-efficiency aluminum construction • Shanghai Yida OEM quality • Parallel flow design • Plug-and-play installation
The WG164282107415 is a complete air conditioning condenser assembly manufactured by Shanghai Yida for SINOTRUK Howo A7, T7H, and other heavy-duty truck models equipped with factory A/C systems. This assembly serves as the primary heat exchanger for the vehicle’s climate control system, responsible for rejecting heat from the refrigerant and converting it from a high-pressure gas to a liquid state. Its OEM-grade construction precisely replicates the original assembly’s dimensions, mounting points, and refrigerant connection interfaces, ensuring a perfect fit and seamless integration with the truck’s existing A/C system.
The condenser is constructed from lightweight, corrosion-resistant aluminum with a parallel flow design that maximizes heat transfer efficiency. The tightly packed aluminum fins and optimized tube layout provide 20-30% faster heat dissipation compared to standard condenser designs. The assembly includes the condenser core, mounting brackets, and connection fittings, providing a complete, ready-to-install solution for replacing a failed or damaged unit.
The WG164282107415 condenser assembly is engineered to withstand the extreme conditions of heavy-duty truck operation, including high ambient temperatures up to 45-50°C, vibration, and road debris. Its robust aluminum construction and corrosion-resistant coating ensure long-lasting durability, while its parallel flow design provides superior thermal efficiency for rapid cabin cooling.
Common symptoms of a failing condenser assembly include reduced A/C cooling performance, visible damage or leaks from the condenser core, and elevated system pressures. Replacing a damaged or clogged condenser with the WG164282107415 restores full A/C system performance, ensuring driver comfort and preventing costly compressor failure.
Whether you’re performing scheduled A/C maintenance or repairing a failed system, the WG164282107415 Condenser Assembly (Shanghai Yida) offers the quality, precision, and durability that SINOTRUK Howo professionals demand.
The WG164282107415 condenser assembly is specifically designed for SINOTRUK Howo A7, T7H, and SITRAK C7H series trucks, as well as other heavy-duty models equipped with factory air conditioning systems that use this condenser configuration. It serves as a direct replacement for the original factory condenser and is compatible with all vehicles that use this specific mounting and connection layout.
This condenser assembly is essential for applications involving long-haul transport, construction, mining, and other demanding environments where cabin climate control is critical for driver comfort and productivity. In these conditions, the condenser is subjected to high ambient temperatures, vibration, and exposure to road debris. The WG164282107415 is engineered to withstand these harsh conditions, providing consistent cooling performance and reliable A/C system operation.
When replacing a condenser, it is important to also inspect the receiver-drier, expansion valve, and compressor for wear – these components often require replacement together to ensure optimal A/C system performance. The WG164282107415 is designed to work with the factory-spec refrigerant (R134a or equivalent) and A/C system components, ensuring proper cooling performance and system longevity.
For fleets with multiple HOWO trucks, this condenser assembly standardizes A/C repairs, simplifying parts inventory and ensuring the correct component is available for scheduled maintenance or emergency repairs. Always verify the specific vehicle model and A/C system configuration on your truck to confirm compatibility, though the WG164282107415 is the standard condenser assembly for numerous A7, T7H, and C7H chassis with factory A/C systems.
Replacing the WG164282107415 condenser assembly is a moderately complex procedure that requires specialized A/C service equipment, including a refrigerant recovery machine, vacuum pump, and manifold gauge set. This work should be performed by a qualified A/C technician with experience in heavy-duty truck HVAC systems.
Begin by safely recovering the refrigerant from the A/C system using an approved recovery machine. Remove the grille or front panel as needed to access the condenser mounting location. Disconnect the refrigerant lines from the old condenser and carefully remove the assembly from the vehicle.
Clean the mounting area and inspect the refrigerant lines for damage. Install the new WG164282107415 condenser assembly, securing it with the provided mounting brackets and hardware. Reconnect the refrigerant lines using new O-rings and torque the fittings to the manufacturer’s specifications.
Evacuate the A/C system using a vacuum pump to remove moisture and air, then recharge with the correct amount of R134a refrigerant as specified in the vehicle’s service manual. Run the engine and A/C system to verify cooling performance and check for any leaks around the condenser connections.
For maintenance, regularly inspect the condenser for signs of physical damage, corrosion, or debris buildup that could restrict airflow. Clean the condenser fins gently with compressed air or a soft brush to remove dirt and debris. The WG164282107415 is designed for long service life, but proper maintenance of the entire A/C system is essential for optimal cooling performance and compressor protection.
The WG164282107415 condenser assembly is manufactured by Shanghai Yida, a recognized supplier of quality thermal management components for commercial vehicles. The assembly is produced in an ISO 9001-certified facility using advanced brazing, assembly, and quality control processes. The aluminum materials are sourced from certified suppliers and undergo rigorous inspection to ensure consistent quality and performance.
Every condenser assembly undergoes comprehensive quality checks, including leak testing under pressure, dimensional verification, and visual inspection for defects. The parallel flow core is tested for flow performance and heat transfer efficiency. Random samples from each production batch are subjected to pressure cycling and thermal shock testing to confirm long-term durability.
We back the WG164282107415 with a comprehensive warranty against material and workmanship defects. Our rigorous quality control ensures that every condenser assembly delivers the same fit, performance, and durability as the original factory part, giving you confidence in your truck’s A/C system reliability.
Choose genuine quality for your A/C system repair – choose the WG164282107415 Condenser Assembly (Shanghai Yida).
The WG164282107415 Condenser Assembly (Shanghai Yida) is a critical component that directly affects the cooling performance, driver comfort, and reliability of your HOWO truck’s air conditioning system. A failed or clogged condenser can lead to poor cabin cooling, elevated system pressures, compressor damage, and costly repairs. By replacing a damaged condenser with this genuine OEM-grade assembly, you restore full A/C system performance and driver comfort.
The WG164282107415 is manufactured from premium aluminum with a high-efficiency parallel flow design and corrosion-resistant coating, delivering the thermal performance and durability required for reliable A/C operation. Its OEM-grade construction ensures perfect fitment and seamless integration with your truck’s existing A/C system, eliminating the need for modifications or adapters. This translates to rapid cabin cooling, reduced compressor strain, and extended A/C system life.
Fleet operators will benefit from reduced A/C system maintenance, fewer unscheduled breakdowns, and lower overall repair costs. Owner-operators will have peace of mind knowing their truck’s cabin climate is controlled by a component that meets OEM specifications and is backed by a comprehensive warranty.
Invest in the WG164282107415 Condenser Assembly (Shanghai Yida) and ensure your SINOTRUK Howo’s A/C system delivers the cooling performance and reliability you expect. Its superior materials, precision engineering, and proven durability make it the smart choice for professionals who demand the best for their vehicles.
Order your WG164282107415 today and keep your HOWO truck’s cabin cool, comfortable, and ready for any climate.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
