- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The AZ22210040207 Reverse Gear is a precision-engineered, high-strength transmission component designed for the reverse gear train in SINOTRUK Howo heavy-duty manual transmissions. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade reverse gear as a direct replacement for the original factory component. The AZ22210040207 gear enables smooth, reliable reverse engagement, providing the necessary torque transfer for backing maneuvers under all operating conditions. Manufactured from high-quality alloy steel with precision-cut teeth, controlled heat treatment, and a durable surface finish, this reverse gear withstands the extreme torque loads, shock forces, and wear typical of heavy-duty truck transmissions, delivering consistent performance and extended service life.
The AZ22210040207 reverse gear is an essential component for maintaining proper transmission function and driver confidence. A worn or damaged reverse gear can lead to difficult engagement, grinding noises, and eventual transmission failure. This genuine OEM gear restores smooth reverse operation and ensures your HOWO truck operates reliably.
OEM direct replacement • High-strength alloy steel • Precision-cut teeth • Controlled heat treatment • Smooth reverse engagement
The AZ22210040207 is a reverse gear designed for use in SINOTRUK Howo transmissions, particularly the 12JSD and 16JSD series manual gearboxes found in A7 and T7H heavy-duty trucks. This gear is part of the reverse gear train and is responsible for enabling smooth, reliable backing operations. Its OEM-grade construction precisely matches the original gear’s dimensions, tooth profile, and material specifications, ensuring perfect fitment and consistent performance.
The reverse gear is manufactured from high-quality alloy steel with precision-cut gear teeth that are carefully profiled to ensure smooth engagement and quiet operation. The gear teeth are carburized or induction-hardened to achieve a wear-resistant surface while maintaining a tough, ductile core that can withstand shock loads. The gear is then precision-ground to achieve the required tooth profile and surface finish, minimizing friction and noise during operation.
The AZ22210040207 features a carefully calculated gear geometry that provides the correct gear ratio for reverse operations, allowing for smooth maneuvering in tight spaces and controlled backing under load. The gear is designed to mesh precisely with the reverse idler gear and the reverse drive gear, ensuring smooth power flow and minimizing the risk of gear clash or damage during engagement.
Common symptoms of a failing reverse gear include grinding noises when engaging reverse, difficulty shifting into reverse, popping out of reverse gear, and visible wear or chipping on the gear teeth. Replacing a worn reverse gear with the AZ22210040207 restores smooth, reliable reverse operation and protects the transmission from further damage.
Whether you’re performing a major transmission overhaul or repairing a reverse gear issue, the AZ22210040207 Reverse Gear offers the quality, precision, and durability that SINOTRUK Howo professionals demand.
The AZ22210040207 reverse gear is specifically designed for SINOTRUK Howo A7 and T7H series trucks equipped with 12JSD and 16JSD manual transmissions. This gear is used in the reverse gear train, working in conjunction with the reverse idler gear and the reverse drive gear. It serves as a direct replacement for the original factory reverse gear and is compatible with all transmissions that use this specific gear configuration.
This reverse gear is essential for applications involving frequent backing maneuvers, such as construction, mining, and heavy hauling. In these demanding environments, the reverse gear is subjected to high torque loads and shock forces. The AZ22210040207 is engineered to withstand these harsh conditions, providing reliable and consistent reverse operation.
When replacing a reverse gear, it is important to inspect the reverse idler gear, the reverse drive gear, and the shift fork for wear – these components often wear together. The AZ22210040207 is designed to work with the factory-spec mating parts, ensuring proper gear mesh and backlash. Replacing the reverse gear together with the idler gear and shift fork is recommended for optimal reverse operation.
For fleets with multiple HOWO trucks equipped with 12JSD or 16JSD transmissions, this reverse gear standardizes transmission repairs, simplifying parts inventory and ensuring the correct component is available for scheduled maintenance or transmission overhauls. Always verify the transmission model and gear set type on your truck to confirm compatibility, though the AZ22210040207 is the standard reverse gear for the majority of 12JSD and 16JSD transmission applications in A7 and T7H chassis.
Replacing the AZ22210040207 reverse gear is a complex procedure that requires advanced mechanical knowledge, specialized tools, and access to a transmission workbench. This work should only be performed by qualified transmission technicians or experienced heavy-duty mechanics. Begin by safely removing the transmission from the vehicle and mounting it on a suitable work stand.
Drain the transmission fluid and disassemble the transmission case to access the reverse gear train. Carefully remove the old reverse gear, noting the orientation and the position of any thrust washers or spacers. Inspect the gear teeth, the idler gear, and the shift fork for wear patterns – if the reverse gear shows excessive wear, replace it with the new unit.
Clean all internal components with a suitable solvent and inspect the mating gears for wear or damage. If any mating components show significant wear, replace them to ensure proper gear mesh and reverse gear longevity. Lubricate the new AZ22210040207 reverse gear with clean transmission fluid before installation.
Install the new reverse gear onto the shaft, ensuring correct orientation and alignment with the idler gear and the reverse drive gear. Secure the retaining rings and reinstall any thrust washers or spacers. Reassemble the transmission, torqueing all fasteners to the specified values. Refill with the recommended grade and quantity of transmission fluid.
For maintenance, regular transmission fluid changes at manufacturer-recommended intervals (typically 50,000-100,000 km) are essential to ensure the reverse gear and other components are properly lubricated. If you notice grinding noises or difficulty engaging reverse, inspect the reverse gear train promptly. The AZ22210040207 is built for long service life, but early detection of wear is key to preventing major transmission damage.
The AZ22210040207 reverse gear is manufactured in an ISO 9001-certified facility using advanced forging, machining, and heat-treatment processes. The alloy steel is sourced from certified mills and undergoes chemical analysis to confirm its composition and mechanical properties. Each gear is forged to near-net shape and then precision-machined to exacting tolerances.
Every reverse gear undergoes a comprehensive series of quality checks, including dimensional verification, tooth profile inspection, and surface finish measurement. The gear teeth are inspected for hardness and case depth, and the gear is checked for concentricity and runout. Random samples from each batch are subjected to fatigue testing and durability testing to confirm long-term reliability.
We back the AZ22210040207 with a comprehensive warranty against material and workmanship defects. Our rigorous quality control ensures that every gear delivers the same fit, performance, and durability as the original factory part, giving you confidence in your transmission’s reverse operation.
Choose genuine quality for your transmission repair – choose the AZ22210040207 Reverse Gear.
The AZ22210040207 reverse gear is a critical component that directly affects the shifting performance and reliability of your HOWO truck’s transmission, particularly during backing operations. A worn or damaged reverse gear can cause grinding noises, difficulty engaging reverse, and eventually, complete transmission failure. By replacing a worn reverse gear with this genuine OEM-grade component, you restore smooth, reliable reverse engagement and protect the transmission from further damage.
The AZ22210040207 is manufactured from premium alloy steel with precision-cut, case-hardened teeth, delivering the strength and wear resistance required for reliable reverse operation. Its controlled heat treatment and precise tooth profile ensure smooth, quiet engagement, reduced driver fatigue, and extended transmission life. This translates to confident backing maneuvers, improved driver productivity, and reduced maintenance costs.
Fleet operators will benefit from reduced transmission maintenance, fewer unscheduled breakdowns, and lower overall repair costs. Owner-operators will have peace of mind knowing their truck’s transmission is protected by a component that meets OEM specifications and is backed by a comprehensive warranty.
Invest in the AZ22210040207 Reverse Gear and ensure your SINOTRUK Howo’s transmission delivers the reliable reverse operation you expect. Its superior materials, precision engineering, and proven durability make it the smart choice for professionals who demand the best for their vehicles.
Order your AZ22210040207 today and keep your HOWO truck’s reverse engagement smooth, reliable, and ready for any backing maneuver.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
