- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 Front Bumper Assembly (With Lamps) is a complete, fully integrated front bumper system designed specifically for SINOTRUK Howo heavy-duty trucks. As a leading supplier of genuine Sinotruk howo parts, we offer this comprehensive front bumper assembly as a direct OEM replacement for the original factory unit. The WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 complete assembly includes the main bumper structure, mounting brackets, and integrated halogen lamps (left and right), providing a ready-to-install solution that restores both the protective function and the factory appearance of your truck’s front end.
This front bumper assembly is engineered from high-strength steel with a durable powder-coated finish, offering excellent impact resistance and corrosion protection. The integrated lamps deliver bright, reliable illumination, ensuring compliance with road safety regulations and enhancing visibility during nighttime and adverse weather conditions. Its complete, pre-assembled design eliminates the need to source and fit separate components, significantly reducing installation time and ensuring a perfect fit.
Complete assembly (bumper + brackets + lamps) • High-strength steel construction • Integrated halogen lamps • Corrosion-resistant coating • Bolt-on installation
The WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 is a complete front bumper assembly with integrated lamps, designed for the SINOTRUK Howo A7 and T7H series trucks. This all-in-one unit includes the main bumper beam, mounting brackets, and fully functional left and right halogen headlamps, providing a comprehensive front-end solution for collision repairs, restoration projects, or complete front-end replacements. Its OEM-grade construction replicates the original part’s dimensions, mounting points, and lighting specifications, ensuring a perfect fit and seamless integration with the truck’s existing systems.
The bumper beam is fabricated from high-strength cold-rolled steel with a thickness of 3.0 mm, providing exceptional impact resistance and structural rigidity. It is finished with an e-coat primer and a black powder topcoat (RAL 9005) that offers superior protection against corrosion, stone chips, and UV degradation. The integrated mounting brackets are precision-welded and drilled to match the chassis frame, ensuring accurate alignment and secure attachment. The bumper also features integrated tow hooks and fog light cutouts (where applicable), adding both functionality and aesthetic appeal.
The included halogen lamps (left and right) are fully assembled with high-quality reflectors, clear polycarbonate lenses, and H7 bulb sockets (bulbs sold separately). These lamps produce a bright, focused beam pattern that complies with ECE R48 and DOT FMVSS 108 standards, ensuring excellent nighttime visibility and road safety. The lamps are IP67 rated for dust and water resistance, preventing internal fogging and maintaining optical clarity over time.
This complete assembly eliminates the need to source and match separate components, saving valuable workshop time and reducing the risk of compatibility issues. Whether you are repairing front-end damage, upgrading your truck’s appearance, or performing a complete restoration, the WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 offers a convenient, high-quality, and cost-effective solution.
With its robust construction, precise fit, and integrated lighting, this front bumper assembly delivers the protection, functionality, and aesthetics that SINOTRUK Howo owners and technicians demand.
The WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 Front Bumper Assembly is specifically designed for SINOTRUK Howo A7 and T7H series trucks, including models ZZ4257, ZZ3257, and other variants with the same front chassis and lighting configuration. This assembly serves as a direct replacement for the original front bumper and integrated lamp units, and is also compatible with previous model years that use the same mounting and electrical interfaces.
This complete assembly is suitable for a wide range of applications, including long-haul transport, construction, mining, and municipal services. In these demanding environments, the front bumper is subjected to impacts from debris, curbs, and off-road obstacles, as well as exposure to road salts, moisture, and UV radiation. The WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 is engineered to withstand these harsh conditions, providing reliable protection for the radiator, cooling system, and front chassis components.
The integrated lamps are compatible with the truck’s existing electrical system (12V or 24V), and the H7 bulb sockets accept standard halogen bulbs (not included), allowing for easy bulb replacement when needed. The assembly also includes pre-wired connectors that match the factory harness, simplifying the electrical connection.
For fleets with mixed HOWO models, this assembly covers a broad range of front-end applications, reducing the number of separate part numbers needed for inventory. Always verify the chassis frame width and lamp connector type on your specific truck, though the WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 is the standard complete front bumper for the majority of A7 and T7H models.
Installing the WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 front bumper assembly is a moderately complex task that requires two people and a set of basic hand tools. Begin by safely raising the front of the truck and supporting it on jack stands. Disconnect the negative battery terminal to prevent any electrical shorts. Remove the old bumper by unbolting the mounting brackets from the chassis frame (typically 6–8 bolts).
Clean the chassis mounting surfaces, removing any dirt, rust, or debris. Inspect the frame rails for damage and ensure that the mounting holes are clean and unobstructed. Position the new assembly in front of the truck, aligning the bracket holes with the frame holes. Have an assistant support the bumper while you insert and hand-tighten the mounting bolts.
Torque the bolts to the specified value (typically 80–100 Nm for M12 bolts) in a crisscross pattern to ensure even clamping. Connect the electrical harnesses for the lamps, ensuring that the connectors are fully seated and locked. Verify that the bumper is level and centered, and that the lamps are properly aligned.
Reconnect the battery and test all lighting functions – low beam, high beam, turn signals, and fog lights (if equipped). Adjust the beam alignment if necessary using the built-in adjustment screws. Inspect the bumper for any gaps or misalignment, and adjust as needed.
For maintenance, regularly clean the bumper and lamps with mild soap and water. Avoid using abrasive cleaners or pressure washers at close range, as these can damage the powder coating and lamp lenses. Inspect the bumper mounting bolts periodically for tightness, and check the lamps for moisture ingress or cracked lenses. Replace any damaged bulbs promptly to maintain optimal visibility.
The WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 Front Bumper Assembly is manufactured in an ISO 9001-certified facility using advanced stamping, welding, and assembly processes. The steel coils are sourced from certified mills and undergo chemical analysis to ensure they meet high-strength specifications. The bumper beam is formed using precision hydraulic presses, and all welds are inspected for integrity.
The powder coating process includes a thorough pretreatment (phosphate wash) and an e-coat primer application before the final powder coat is applied, ensuring excellent adhesion and corrosion resistance. Each assembly undergoes dimensional verification using 3D coordinate measurement, and the lamps are tested for beam pattern, intensity, and water ingress (IP67). Random samples are subjected to salt spray testing (500 hours) and thermal cycling (-50°C to +120°C) to confirm durability.
We back the WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 with a comprehensive warranty against material and workmanship defects. Our rigorous quality control ensures that every assembly delivers the same fit, function, and durability as the original factory part, giving you confidence in your truck’s front-end protection and lighting performance.
Choose genuine quality for your front-end restoration – choose the WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 Front Bumper Assembly.
The WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 Front Bumper Assembly (With Lamps) is a comprehensive, high-quality solution for protecting your SINOTRUK Howo’s front end and restoring its lighting performance. A damaged or missing front bumper not only compromises your truck’s safety and appearance but also exposes critical cooling and chassis components to impact damage and corrosion. By replacing it with this complete OEM-grade assembly, you restore full structural protection and factory-correct lighting.
The integrated halogen lamps provide bright, reliable illumination that meets international safety standards, ensuring that you have clear visibility on dark roads and in adverse weather. The high-strength steel construction and corrosion-resistant coating ensure that the bumper will withstand the rigors of heavy-duty trucking for years, protecting your investment and reducing maintenance costs.
Fleet managers will appreciate the complete, pre-assembled design that minimizes installation time and ensures consistent quality across the fleet. Owner-operators will gain peace of mind knowing that their truck’s front end is protected by a component that meets OEM specifications and is backed by a comprehensive warranty.
Invest in the WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 Front Bumper Assembly and ensure your SINOTRUK Howo’s front end delivers the protection, lighting, and aesthetics that the manufacturer intended. Its robust construction, integrated lighting, and precise fit make it the intelligent choice for drivers and technicians who demand the best for their vehicles.
Order your WG1642242101-WG9719720001-WG9719720002-WG9719720025-WG9719720026 today and give your HOWO truck the complete front-end solution it deserves.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
