- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The WG1664232047/1 Left Pedal Bracket is a rugged, precision-engineered chassis component designed specifically for SINOTRUK Howo heavy-duty trucks. As a trusted source of genuine Sinotruk howo parts, we supply this OEM-grade bracket as a direct replacement for the original factory part. The WG1664232047/1 bracket provides a secure, stable mounting platform for the left-side entry pedal, ensuring safe and convenient cab access under the most demanding operating conditions. Manufactured from high-strength ABS composite with reinforced mounting points, this bracket resists cracking, corrosion, and fatigue, delivering reliable service throughout the vehicle’s lifespan.
The WG1664232047/1 left pedal bracket is an essential safety and convenience component, directly impacting driver comfort and daily operational efficiency. Its exact OEM dimensions and bolt-hole alignment guarantee a perfect fit on HOWO A7 and T7H chassis, eliminating the need for modifications or adapters.
OEM direct replacement • High-strength ABS construction • Corrosion & impact resistant • Precise bolt-on fitment
The WG1664232047/1 is a left-side pedal bracket specifically engineered for the SINOTRUK Howo A7 and T7H series trucks. This chassis component provides the structural foundation for the driver’s entry pedal, ensuring a stable and secure stepping surface for daily cab access. Designed as a direct OEM replacement, the bracket matches the original part in every dimension, mounting hole location, and material specification.
Constructed from high-impact ABS plastic with integrated reinforcement ribs, the WG1664232047/1 bracket offers excellent resistance to cracking, UV degradation, and chemical exposure. Its lightweight yet durable design reduces overall vehicle weight while maintaining the strength required for heavy-duty use. The bracket’s black finish blends seamlessly with the truck’s underbody and resists corrosion from road salts and moisture.
The left pedal bracket plays a critical role in driver safety – a loose or damaged bracket can cause the pedal to shift, leading to slips and potential injuries. By installing the genuine WG1664232047/1, you restore the original pedal geometry and ensure that the entry step remains firm and reliable throughout the truck’s service life.
This bracket is also compatible with related part numbers WG1664232047 and WG1664231057/1, offering flexibility for fleet maintenance. Its robust construction and precise fitment make it the preferred choice for workshops and owner-operators who demand OEM-quality chassis parts.
The WG1664232047/1 Left Pedal Bracket is specifically designed for the SINOTRUK Howo A7 and T7H heavy-duty truck platforms, including models such as ZZ4257, ZZ3257, and other variants built on the same chassis architecture. It is a direct replacement for the original equipment bracket and is also backward-compatible with earlier part number WG1664232047.
This bracket is used across a wide range of applications, including long-haul transport, regional distribution, construction, mining, and agricultural operations. In all these environments, the left pedal bracket is subject to frequent foot traffic, exposure to debris, and extreme weather – making its structural integrity critical for driver safety and vehicle uptime.
When replacing the bracket, it is important to verify that the mounting holes on the chassis rail are clean and undamaged. The WG1664232047/1 uses the same two-bolt pattern as the original, so no additional drilling or adapters are required. It is also compatible with aftermarket pedal assemblies that follow OEM mounting specifications.
For fleets with mixed HOWO models, the WG1664232047/1 offers a standardized replacement part that simplifies inventory management. Always cross-reference your vehicle’s VIN or chassis number to confirm the correct bracket variant, although this part fits the majority of left-side pedal applications on A7 and T7H trucks.
Installing the WG1664232047/1 bracket is a quick and straightforward procedure that can be completed with basic hand tools. Begin by safely supporting the truck and removing the old bracket, taking note of the bolt orientation and any washers or spacers used. Clean the chassis mounting surface thoroughly to remove dirt, rust, or old sealant.
Position the new WG1664232047/1 bracket against the chassis rail, aligning the two mounting holes. Insert the bolts (M10 grade 8.8 or higher recommended) and torque them to the factory specification of 45–55 Nm. If the original bolts show signs of corrosion or thread damage, replace them with new hardware to ensure a secure fit.
After installation, attach the left pedal assembly to the bracket using the provided hinge pins or bolts. Check that the pedal moves freely and does not bind, and that the step surface is level and stable. Perform a weight test by stepping on the pedal to confirm that the bracket holds firm without flexing or creaking.
Regular maintenance of the WG1664232047/1 bracket includes visual inspections during routine service intervals. Look for cracks, deformation, or loose bolts. Clean the bracket with a mild detergent and water to remove accumulated dirt and salt, which can accelerate wear on the mounting hardware.
If the vehicle operates in extreme conditions (e.g., heavy off-road use or corrosive environments), consider applying a corrosion inhibitor to the bolt threads and contact surfaces. Replace the bracket immediately if any structural damage is detected, as a compromised bracket can lead to pedal failure and potential injury.
The WG1664232047/1 Left Pedal Bracket is manufactured in an ISO 9001-certified facility under strict quality control protocols. Every bracket is produced using high-grade ABS resin with precise injection-molding parameters to ensure consistent wall thickness, dimensional stability, and surface finish.
Each batch undergoes rigorous testing, including impact resistance (IK08), thermal cycling (-40°C to +80°C), and UV exposure to simulate years of outdoor service. The mounting holes are checked for position accuracy using coordinate measurement machines, and the brackets are visually inspected for any cosmetic or structural defects.
We back the WG1664232047/1 with a comprehensive warranty that covers material and workmanship defects. Our commitment to quality ensures that every bracket delivers the same level of performance and reliability as the original SINOTRUK Howo part, giving you confidence in your truck’s safety and durability.
Choose genuine quality for your chassis repairs – choose the WG1664232047/1 Left Pedal Bracket.
The WG1664232047/1 Left Pedal Bracket is a small but vital component that directly affects driver safety, comfort, and daily productivity. A worn or damaged bracket can lead to a loose pedal, increasing the risk of slips and falls, especially in wet or icy conditions. By replacing it with this genuine OEM-grade part, you restore the original pedal stability and ensure that your drivers can enter and exit the cab with confidence.
Beyond safety, the WG1664232047/1 bracket contributes to the overall structural integrity of the chassis. Its robust ABS construction and precise fitment prevent rattling, reduce stress on adjacent components, and maintain the truck’s resale value by keeping the bodywork and undercarriage in factory condition.
Fleet operators will appreciate the standardized replacement process – the WG1664232047/1 fits seamlessly into maintenance schedules, with minimal downtime and no need for custom fabrication. Owner-operators gain peace of mind knowing that their truck’s entry system is as reliable as the day it left the factory.
Invest in the WG1664232047/1 Left Pedal Bracket and experience the difference that a genuine SINOTRUK Howo part makes. Its proven durability, exact fit, and safety-critical function make it an indispensable choice for professionals who demand the best for their vehicles.
Order your WG1664232047/1 today and ensure your HOWO truck remains safe, reliable, and ready for the road ahead.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
