- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The HA10005979 Crankshaft Seal (Front Timing Cover) is a precision-engineered, high-performance oil seal designed specifically for the front timing cover of SINOTRUK Howo heavy-duty engines. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade crankshaft seal as a direct replacement for the original factory component. The HA10005979 seal prevents engine oil from leaking past the front crankshaft journal, maintaining proper oil pressure and protecting the timing components from contamination. Manufactured from high-quality fluoroelastomer (FKM) with a precision-molded sealing lip and a corrosion-resistant metal garter spring, this crankshaft seal delivers reliable, long-lasting performance under extreme temperatures and high rotational speeds.
The HA10005979 front timing cover seal is a critical component for maintaining engine oil integrity, preventing leaks that can lead to low oil pressure, timing chain/belt damage, and costly engine repairs. Its exact OEM specifications ensure a perfect fit and seamless integration with the front cover and crankshaft hub.
OEM direct replacement • Fluoroelastomer (FKM) construction • High-temperature resistant • Precision-molded sealing lip • Easy press-fit installation
The HA10005979 is a front crankshaft oil seal designed for the timing cover of SINOTRUK Howo engines, including the popular WD615, D10, and D12 series powerplants. This seal is installed in the front timing cover, where it wraps around the crankshaft snout to prevent engine oil from escaping the crankcase and contaminating the timing chain or belt area. Its OEM-grade construction duplicates the original seal’s dimensions, lip geometry, and material composition, ensuring a perfect fit and reliable sealing performance.
The seal body is molded from high-grade fluoroelastomer (FKM), a synthetic rubber known for its exceptional resistance to high temperatures (up to 200°C), engine oils, coolant, and aggressive additives. This material maintains its elasticity and sealing force over a wide temperature range, ensuring that the seal continues to perform effectively even after thousands of thermal cycles. The sealing lip features a precision-machined hydrodynamic profile that channels a thin film of oil back into the crankcase, reducing friction and wear on both the seal and the crankshaft surface.
A corrosion-resistant stainless steel garter spring is embedded in the seal’s lip to maintain consistent radial pressure against the crankshaft journal, compensating for minor shaft wear and thermal expansion. The outer casing is coated with a bonding agent that ensures a secure, leak-free fit within the timing cover bore. This design prevents oil bypass and ensures that the seal remains firmly in place even under high-vibration conditions typical of heavy-duty diesel engines.
Common symptoms of a failing front crankshaft seal include visible oil leaks from the front of the engine, oil spots on the ground beneath the timing cover area, and low engine oil levels without an obvious external leak. Replacing a worn or damaged seal with the HA10005979 restores full sealing integrity, prevents oil loss, and protects the timing components from contamination, ensuring reliable engine operation and extended service life.
Whether you’re performing a major engine overhaul or addressing an oil leak, the HA10005979 Crankshaft Seal offers the quality, durability, and precise fit that SINOTRUK Howo technicians and owners trust.
The HA10005979 Crankshaft Seal (Front Timing Cover) is specifically designed for SINOTRUK Howo A7 and T7H series trucks, as well as other models equipped with the WD615, D10, and D12 engine families. It is installed in the front timing cover, sealing the crankshaft snout where it exits the engine block. This seal is a direct replacement for the original factory component and is compatible with both mechanical and electronic controlled engine variants.
This front crankshaft seal is used in a wide range of applications, including long-haul transport, construction, mining, and agricultural operations, where the engine is subjected to continuous high-load operation, extreme temperatures, and demanding duty cycles. Its robust FKM construction and precision sealing lip ensure reliable performance in these tough environments, preventing oil leaks that can lead to contamination of timing components and potential engine failure.
When replacing the front crankshaft seal, it is important to inspect the crankshaft journal for scoring or wear, as a damaged shaft surface can compromise the seal’s effectiveness. The HA10005979 is designed to work with the factory-spec crankshaft surface finish, ensuring optimal sealing performance. It is also recommended to replace the timing cover gasket and inspect the front cover for cracks or damage during the seal replacement process.
For fleets with mixed HOWO models, this seal covers a broad range of engine applications, simplifying parts inventory and ensuring consistent maintenance standards. Always verify the crankshaft journal diameter and seal bore size on your specific engine, though the HA10005979 is the standard front seal for the majority of Howo WD615, D10, and D12 engine applications.
Replacing the HA10005979 front crankshaft seal is a moderate-complexity task that requires careful preparation and attention to detail. Begin by safely raising the front of the truck and removing the radiator, fan shroud, and serpentine belt to gain access to the front timing cover. Drain the engine oil and remove the crankshaft pulley/hub using a suitable puller tool.
Remove the front timing cover bolts and carefully separate the cover from the engine block, taking care not to damage the gasket sealing surface. With the cover removed, use a seal puller or flat-blade screwdriver to gently pry the old seal out of the cover bore. Clean the seal bore thoroughly with a solvent and a lint-free cloth, removing any old sealant, debris, or oil residue. Inspect the bore surface for scratches or damage – if any are present, they may need to be repaired with a seal repair sleeve.
Apply a thin film of clean engine oil to the sealing lip of the new HA10005979 seal to lubricate it during initial startup. Use a seal installation tool or a socket of the appropriate diameter to press the new seal evenly into the cover bore until it is fully seated and flush with the cover face. Ensure that the seal is not cocked or deformed during installation – this is critical for preventing leaks.
Reinstall the timing cover with a new gasket, torqueing the bolts to the specified value in the correct sequence. Reinstall the crankshaft pulley, torqueing the center bolt to the factory specification. Refill the engine with the correct grade and quantity of oil, reconnect all components, and start the engine. Check for oil leaks around the seal area and verify that the engine runs smoothly with no abnormal noises.
For maintenance, regular inspections of the front timing cover area for oil leaks are recommended. If any seepage is detected, investigate the cause promptly. The HA10005979 is designed for long service life, but factors such as extreme temperatures, oil contamination, or crankshaft journal wear can shorten its lifespan. Replacing the seal as part of a major engine service (every 500,000 km or as needed) is a prudent preventive measure.
The HA10005979 Crankshaft Seal (Front Timing Cover) is manufactured in an ISO 9001-certified facility using advanced molding and quality control processes. The FKM compound is formulated to meet SINOTRUK’s precise specifications for hardness, tensile strength, and temperature resistance. Each seal is produced with high-precision tooling to ensure exact dimensional accuracy and consistent sealing lip geometry.
Every seal undergoes a series of quality checks, including dimensional verification, visual inspection for molding defects, and hardness testing. The garter spring is checked for proper tension and corrosion resistance. Random samples from each production batch are subjected to leak testing under pressure, high-temperature aging tests, and dynamic seal performance testing on a test rig that simulates real-world operating conditions.
We back the HA10005979 with a comprehensive warranty against material and workmanship defects. Our rigorous quality control ensures that every seal delivers the same performance, fit, and reliability as the original factory part, giving you confidence in your engine’s oil sealing integrity.
Choose genuine quality for your engine sealing needs – choose the HA10005979 Crankshaft Seal.
The HA10005979 Crankshaft Seal (Front Timing Cover) is a critical component that protects your SINOTRUK Howo engine from oil leaks and the serious consequences they can cause. A failed front crankshaft seal can lead to a steady oil leak that not only depletes your engine’s oil supply but also contaminates the timing chain or belt, leading to premature wear and potentially catastrophic engine failure. By replacing a worn seal with this genuine OEM-grade component, you restore the full oil sealing integrity that your engine was designed to deliver.
The HA10005979 is engineered with high-performance FKM material that resists degradation from heat, oil, and additives, ensuring that the seal remains effective for the long haul. Its hydrodynamic sealing lip and stainless steel garter spring provide consistent, reliable sealing even under extreme operating conditions, protecting your engine investment and reducing the risk of unscheduled downtime.
Fleet operators will appreciate the seal’s durability and reliability, which reduces the frequency of oil leak-related repairs and the associated costs. Owner-operators will gain peace of mind knowing that their engine is protected by a component that meets OEM specifications and is backed by a comprehensive warranty.
Invest in the HA10005979 Crankshaft Seal and ensure your SINOTRUK Howo’s engine remains leak-free, efficient, and reliable for miles to come. Its precision fit, superior materials, and proven performance make it the intelligent choice for drivers and technicians who demand the best for their vehicles.
Order your HA10005979 today and protect your engine with the quality that SINOTRUK Howo owners trust.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
