- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The Es cardan L-840 Drive Shaft Assembly is a rugged, precision-engineered driveline component designed specifically for SINOTRUK Howo heavy-duty trucks. As a leading supplier of genuine Sinotruk howo parts, we offer this OEM-grade drive shaft assembly as a direct replacement for the original factory unit. The Es cardan L-840 assembly efficiently transfers torque from the transmission to the rear axle, ensuring smooth power delivery, reliable performance, and extended driveline life. Manufactured from high-strength alloy steel with precision-balanced components, heavy-duty universal joints, and durable spline connections, this drive shaft assembly withstands the extreme torque loads, high rotational speeds, and demanding operating conditions typical of heavy-duty hauling, construction, and off-highway applications.
The Es cardan L-840 drive shaft assembly is a critical drivetrain component that directly impacts your truck’s power delivery, ride comfort, and overall reliability. A worn or damaged drive shaft can lead to vibration, noise, and catastrophic driveline failure. This genuine OEM assembly restores factory-level balance, strength, and durability, ensuring your HOWO truck operates smoothly and efficiently.
OEM direct replacement • High-strength alloy steel • Precision-balanced • Heavy-duty universal joints • Long service life
The Es cardan L-840 is a complete drive shaft assembly designed for SINOTRUK Howo A7, T7H, and other heavy-duty truck models. This assembly transfers engine torque from the transmission output shaft to the rear axle differential, enabling forward motion and delivering power to the wheels. Its OEM-grade construction replicates the original assembly’s dimensions, spline count, universal joint specifications, and balance characteristics, ensuring a perfect fit and smooth, vibration-free operation.
The drive shaft tube is fabricated from high-strength seamless steel tubing with a precision-welded construction that provides exceptional torsional strength and resistance to bending. The assembly is dynamically balanced at the factory to minimize rotational vibration, ensuring a smooth ride and reducing wear on bearings, seals, and other driveline components. The universal joints are precision-ground and equipped with heavy-duty needle bearings, providing smooth articulation and long service life even under high torque loads.
The Es cardan L-840 assembly includes robust spline connections at both ends, allowing for axial movement and accommodating suspension travel and chassis flex. The splines are heat-treated for wear resistance and feature a corrosion-resistant coating to prevent seizing and ensure easy serviceability. The assembly also includes high-quality dust seals that protect the universal joints and splines from contamination, extending the service life of the drive shaft.
Common symptoms of a failing drive shaft assembly include vibration under acceleration, clunking or clicking noises during gear changes, excessive driveline play, and visible damage to the universal joints or tube. Replacing a worn or damaged assembly with the Es cardan L-840 restores smooth power delivery, eliminates vibration, and ensures your HOWO truck operates reliably and efficiently.
Whether you’re performing a complete drivetrain overhaul or replacing a failed component, the Es cardan L-840 Drive Shaft Assembly offers the quality, strength, and precision fit that SINOTRUK Howo owners and technicians rely on.
The Es cardan L-840 Drive Shaft Assembly is specifically designed for SINOTRUK Howo A7, T7H, and other heavy-duty truck models equipped with compatible transmission and axle configurations. This assembly serves as a direct replacement for the original drive shaft and is compatible with a wide range of engine and drivetrain combinations, including the WD615, D10, D12, and MC series powerplants paired with manual or automatic transmissions.
This drive shaft assembly is used in all 4×2 and 6×4 chassis configurations where the transmission-to-axle distance requires an intermediate shaft length of approximately 840 mm. It is suitable for a wide range of applications, including long-haul transport, construction, mining, agriculture, and municipal services. In these demanding environments, the drive shaft is subjected to extreme torque loads, continuous operation, and frequent articulation, making its strength and reliability critical to overall vehicle performance.
When replacing a drive shaft assembly, it is important to verify the overall length, spline count, and universal joint size to ensure proper fitment. The Es cardan L-840 is designed to match the factory specifications, making it a direct bolt-in replacement. It is also compatible with aftermarket center bearings and support brackets where used in multi-piece shaft configurations.
For fleets with multiple HOWO models, this assembly covers a broad range of applications, simplifying parts inventory and ensuring that the correct drive shaft is readily available for maintenance or emergency repairs. Always verify the specific length and connection type on your truck to confirm compatibility, though the Es cardan L-840 is the standard drive shaft for the majority of A7 and T7H chassis with this axle spacing.
Installing the Es cardan L-840 drive shaft assembly is a moderately complex procedure that requires heavy lifting equipment, specialized tools, and a solid understanding of driveline systems. It is recommended that this work be performed by a qualified heavy-duty mechanic or driveline specialist. Begin by safely raising the truck and supporting it on jack stands, ensuring the transmission is in neutral and the parking brake is engaged.
Remove the old drive shaft by marking the orientation of the universal joints (to maintain balance) and unbolting the flanges from the transmission yoke and axle pinion flange. Support the drive shaft with a transmission jack or suitable support to prevent it from falling. Remove the retaining bolts and carefully withdraw the assembly from the vehicle.
Clean the mating surfaces on the transmission and axle flanges, removing any dirt, debris, or old sealant. Install the new Es cardan L-840 assembly by aligning the spline connections and flanges. Insert the retaining bolts and torque them to the specified value (typically 60–80 Nm for M10 bolts) using a crisscross pattern to ensure even clamping. Ensure that the universal joints are properly aligned and that the assembly is centered in the driveline.
After installation, check the drive shaft for proper clearance around all surrounding components. Test the vehicle at low speed to verify smooth operation and check for any unusual vibrations or noises. If vibration is present, re-check the universal joint alignment and balance. The Es cardan L-840 is factory-balanced, but proper installation is essential for optimal performance.
For maintenance, regularly inspect the drive shaft for signs of universal joint wear, spline wear, or tube damage. Lubricate the universal joints and splines according to the manufacturer’s recommended intervals (typically every 10,000-15,000 km). The Es cardan L-840 is designed for long service life, but regular inspection and timely replacement of worn components are essential for preventing driveline failures and ensuring safe, reliable operation.
The Es cardan L-840 Drive Shaft Assembly is manufactured in an ISO 9001-certified facility using advanced tube forming, welding, and balancing processes. The seamless steel tubing is sourced from certified mills and is tested for chemical composition, tensile strength, and hardness to ensure it meets the demanding requirements of heavy-duty truck applications.
Each assembly undergoes a comprehensive series of quality checks, including weld inspection (visual and non-destructive testing), dimensional verification, and dynamic balancing to ensure vibration-free operation. The universal joints are tested for smooth articulation and torque capacity, and the splines are inspected for profile accuracy and surface finish. Random samples are subjected to endurance testing, simulating hundreds of thousands of torque cycles and extreme operating conditions.
We back the Es cardan L-840 with a comprehensive warranty against material and workmanship defects. Our rigorous quality control ensures that every drive shaft assembly delivers the same strength, balance, and reliability as the original factory part, giving you confidence in your truck’s driveline integrity.
Choose genuine quality for your driveline replacement – choose the Es cardan L-840 Drive Shaft Assembly.
The Es cardan L-840 Drive Shaft Assembly is a critical component that directly impacts your SINOTRUK Howo’s power delivery, ride comfort, and driveline reliability. A worn or damaged drive shaft can cause severe vibration, driveline noise, and eventually catastrophic failure that can leave you stranded and result in costly repairs. By replacing a failing unit with this genuine OEM-grade assembly, you restore smooth, efficient power transfer from your engine to the wheels.
The Es cardan L-840 is engineered with high-strength materials, precision balance, and heavy-duty universal joints that withstand the extreme torque loads and demanding conditions of heavy-duty trucking. Its exact fit and factory balance ensure a smooth, vibration-free ride that reduces wear on other driveline components and enhances driver comfort.
Fleet operators will benefit from the assembly’s proven durability and reliability, reducing the frequency of driveline repairs and the associated downtime. Owner-operators will gain peace of mind knowing that their truck’s driveline is protected by a component that meets OEM specifications and is backed by a comprehensive warranty.
Invest in the Es cardan L-840 Drive Shaft Assembly and ensure your SINOTRUK Howo delivers the power, smoothness, and reliability you expect. Its superior materials, precision engineering, and dependable performance make it the smart choice for professionals who demand the best for their vehicles.
Order your Es cardan L-840 today and keep your HOWO truck’s driveline performing at its best, mile after mile.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
