- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The FF5488/3959612 Fuel Filter is a premium-quality, high-efficiency fuel filtration component designed specifically for SINOTRUK Howo heavy-duty diesel engines. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade fuel filter as a direct replacement for the original factory element. The FF5488/3959612 filter effectively removes dirt, rust, and other contaminants from diesel fuel, protecting the injection pump and injectors from premature wear and ensuring optimal engine performance. Manufactured with high-quality filter media, a durable steel casing, and precision sealing, this fuel filter delivers reliable filtration, extended service intervals, and consistent fuel flow, helping your HOWO truck maintain peak power, fuel efficiency, and emissions compliance.
The FF5488/3959612 fuel filter is an essential component for maintaining the cleanliness and integrity of your truck’s fuel system. A clogged or damaged filter can lead to reduced power, poor fuel economy, and costly injector and pump repairs. This genuine OEM filter restores full filtration efficiency and ensures your engine receives the clean fuel it needs to perform reliably.
OEM direct replacement • High-efficiency filter media • Durable steel casing • Precision sealing • Extended service life
The FF5488/3959612 is a high-performance fuel filter element designed for SINOTRUK Howo A7, T7H, and other heavy-duty truck models equipped with diesel engines. This filter removes harmful contaminants from the fuel stream, protecting precision components such as the injection pump, injectors, and common-rail system from abrasive wear and clogging. Its OEM-grade construction replicates the original filter’s dimensions, filtration efficiency, and flow characteristics, ensuring a perfect fit and reliable performance.
The filter media is engineered with a high-density cellulose/synthetic blend that captures particles down to a 10-micron nominal rating, with an efficiency of over 98%. The media is pleated to maximize surface area, providing excellent dirt-holding capacity and extended service life. A robust steel casing with a corrosion-resistant coating protects the filter element from physical damage and environmental corrosion, while precision sealing ensures that all fuel passes through the active media.
The FF5488/3959612 fuel filter is designed to withstand the high pressures and flow rates typical of modern diesel fuel systems. Its low pressure drop design ensures adequate fuel delivery to the injection system, even under high-load conditions. The filter also features an integrated drain valve or plug for easy removal of water and sediment during routine maintenance, helping to extend filter life and protect downstream components.
Common signs of a failing fuel filter include engine hesitation, loss of power, difficulty starting, rough idle, and increased exhaust smoke. Replacing a clogged or degraded filter with the FF5488/3959612 restores full fuel flow and filtration, ensuring your engine receives the clean, contaminant-free fuel it needs for optimal performance and longevity.
Whether you’re performing scheduled maintenance or addressing a fuel system issue, the FF5488/3959612 Fuel Filter offers the quality, reliability, and performance that SINOTRUK Howo owners and technicians trust.
The FF5488/3959612 Fuel Filter is specifically designed for SINOTRUK Howo A7, T7H, and other heavy-duty truck models equipped with diesel engines, including the WD615, D10, D12, and MC series powerplants. This filter serves as a direct replacement for the original factory element and is compatible with the standard fuel filter head used across the majority of HOWO chassis configurations.
This filter is used in the primary or secondary fuel filtration stage, depending on the vehicle’s fuel system layout. It is suitable for a wide range of applications, including long-haul transport, construction, mining, agriculture, and marine operations. In these demanding environments, fuel quality can vary significantly, making effective filtration essential for protecting the engine’s injection system from wear and damage.
When replacing a fuel filter, it is important to verify the thread size and seal type to ensure a proper fit. The FF5488/3959612 is designed to match the factory specifications, making it a true plug-and-play replacement. It is also compatible with fuel heaters and water-in-fuel sensors where equipped, providing additional functionality and protection.
For fleets with multiple HOWO models, this filter covers a broad range of applications, simplifying parts inventory and ensuring that the correct filter is readily available for scheduled maintenance or emergency repairs. Always verify the specific filter head type on your truck to confirm compatibility, though the FF5488/3959612 is the standard fuel filter for the majority of A7 and T7H fuel systems.
Replacing the FF5488/3959612 fuel filter is a straightforward procedure that can be completed with basic hand tools. Begin by safely parking the truck and relieving the fuel system pressure (refer to your vehicle’s service manual for the recommended procedure). Place a suitable container under the filter to catch any fuel that may spill during removal.
Using a filter wrench or suitable socket, loosen and remove the old filter from the filter head. Clean the filter head threads and sealing surface with a lint-free cloth. Inspect the sealing O-ring on the new FF5488/3959612 filter – it should be intact and free of damage. Apply a thin film of clean diesel fuel to the O-ring to ensure a proper seal.
Thread the new filter onto the filter head by hand until the O-ring contacts the sealing surface, then tighten an additional 3/4 to 1 full turn (do not overtighten). If the filter has a drain valve, ensure it is closed before installation. Start the engine and check for leaks around the filter – if any leaks are detected, tighten slightly and re-check.
For maintenance, the fuel filter should be replaced at the manufacturer’s recommended intervals (typically every 10,000-15,000 km or annually, depending on fuel quality and operating conditions). The FF5488/3959612 is designed for long service life, but regular inspection and timely replacement are essential for optimal fuel system protection and engine performance.
If you notice reduced engine power, hesitation, or difficulty starting, check the fuel filter immediately. The FF5488/3959612 provides reliable filtration, but it must be maintained properly to ensure continuous protection of your engine’s fuel system.
The FF5488/3959612 Fuel Filter is manufactured in an ISO 9001-certified facility using advanced media processing and assembly techniques. The filter media is sourced from recognized industry leaders and is tested for efficiency, capacity, and flow characteristics. Each filter is assembled with precision components and inspected for seal integrity and structural integrity.
Every unit undergoes a series of quality checks, including leak testing, dimensional verification, and media integrity scanning. Random samples from each production batch are subjected to efficiency testing (per ISO 19438), dirt-holding capacity testing, and flow restriction testing to verify performance. The casing and sealing elements are also tested for corrosion resistance and durability.
We back the FF5488/3959612 with a comprehensive warranty against material and workmanship defects. Our rigorous quality control ensures that every filter delivers the same efficiency, fit, and reliability as the original factory part, giving you confidence in your fuel system protection.
Choose genuine quality for your fuel filtration needs – choose the FF5488/3959612 Fuel Filter.
The FF5488/3959612 Fuel Filter is a critical component for protecting your SINOTRUK Howo’s fuel injection system from the damaging effects of contamination. Diesel fuel can contain dirt, rust, and other abrasive particles that can cause premature wear of injection pump plungers, injector nozzles, and other precision components, leading to reduced performance, increased emissions, and costly repairs.
By replacing a clogged or degraded filter with this genuine OEM-grade unit, you restore full filtration efficiency and ensure that only clean fuel reaches your engine’s most sensitive components. The FF5488/3959612 is manufactured to the highest quality standards, with advanced filter media and durable construction that guarantee reliable performance and long service life.
Fleet operators will benefit from reduced fuel system maintenance, longer component life, and fewer unplanned breakdowns – all of which contribute to lower total cost of ownership. Owner-operators will gain peace of mind knowing that their truck’s fuel system is protected by a component that meets OEM specifications and is backed by a comprehensive warranty.
Invest in the FF5488/3959612 Fuel Filter and ensure your SINOTRUK Howo’s fuel system delivers the performance and reliability you expect. Its proven filtration efficiency, robust construction, and easy maintenance make it the smart choice for professionals who demand the best for their vehicles.
Order your FF5488/3959612 today and keep your HOWO truck’s fuel system clean, protected, and ready for the challenges of the road.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
