- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The WG9725160065 Separation Spacer Ring is a precision-engineered metallic ring used to maintain accurate axial clearance and positioning between rotating and stationary components in the chassis and driveline of SINOTRUK Howo heavy-duty trucks. As a premier supplier of genuine Sinotruk howo parts, we offer this spacer ring as a direct OEM replacement, manufactured to the original equipment’s exacting standards. The ring features a hardened steel construction with ground, parallel faces and a precisely controlled thickness, providing consistent spacing, wear resistance, and long-term durability under the extreme loads, thermal expansion, and vibration typical of heavy-duty trucking.
This separation spacer ring (OEM WG9725160065) is essential for maintaining proper bearing preload, preventing axial play, and ensuring correct gear meshing in wheel hubs, differentials, and transmission assemblies. Its precise dimensions guarantee a perfect fit, eliminating the need for shimming during service. The WG9725160065 is built to endure the rigors of long-haul transport, off-road operations, and severe environmental exposure, delivering dependable service over thousands of miles.
OEM direct replacement • Hardened steel • Precision ground faces • Corrosion-resistant coating
The WG9725160065 Separation Spacer Ring is a precision-machined, annular metal component that serves as a fixed-distance spacer in bearing arrangements, gear assemblies, and shaft connections throughout the chassis and driveline of SINOTRUK Howo trucks. Engineered as a direct OEM replacement, this spacer ring guarantees correct axial positioning, consistent preload, and reliable load transfer. Manufactured to the original specifications, it ensures a seamless fit and dependable performance.
The ring is manufactured from high-quality carbon steel that is heat-treated to achieve uniform hardness and excellent wear resistance. Both faces are precision-ground to a fine finish, ensuring parallelism and flatness within tight tolerances. The inner and outer diameters are accurately machined to provide a close fit with the mating shafts and housings. A protective zinc-phosphate or black-oxide coating is applied to resist corrosion and enhance durability. Each ring is deburred and carefully inspected to ensure it meets the exact OEM dimensions.
This spacer ring is essential for maintaining the correct axial clearance in critical driveline components, preventing bearing preload loss and ensuring efficient power transmission. Its robust material properties and precise engineering guarantee reliable performance over extended service intervals, meeting the rigorous demands of heavy-duty trucking. It is the direct replacement you can trust to keep your SINOTRUK Howo’s driveline running smoothly and accurately.
The WG9725160065 Separation Spacer Ring is specifically designed for SINOTRUK Howo heavy-duty trucks, including Howo A7, T7H, T5G, and other models that use this spacer in wheel hub bearing arrangements, differential pinion shafts, or transmission countershafts. It is compatible with the standard shaft and housing dimensions, making it the ideal replacement for restoring proper axial play and bearing preload.
This spacer ring is suitable for a wide range of applications, including long-haul trucking, regional distribution, construction, mining, and agricultural operations. Its robust construction and precision dimensions ensure reliable spacing even under sustained heavy loads and extreme operating conditions.
When replacing, always verify the inner diameter, outer diameter, and thickness to ensure a perfect match. The WG9725160065 is a direct-fit component that simplifies maintenance and restores original driveline geometry.
Installing the WG9725160065 Separation Spacer Ring requires careful cleaning and correct positioning. Begin by thoroughly cleaning the shaft and housing bore to remove any debris, dirt, or old sealant. Inspect the mating surfaces for nicks or burrs that could affect the ring’s seating. Apply a light coat of clean oil to the ring’s faces to aid in assembly.
Slide the spacer ring onto the shaft or into the housing bore, ensuring it seats squarely against the shoulder or adjacent component. The ring should fit without excessive force; if it is too tight, check for burrs or proper dimensions. Assemble the remaining components (bearings, gears, etc.) and torque the fasteners to the manufacturer’s specifications to achieve the correct preload. Verify the axial clearance using a feeler gauge or dial indicator to confirm that the spacer provides the intended gap.
Regular maintenance includes periodic inspection of the spacer ring for signs of wear, corrosion, or deformation. If the ring shows any damage or the axial clearance becomes inconsistent, replace it during the next service interval. This ring is engineered for long-term durability, but proper installation and regular checks ensure continued driveline reliability.
With correct installation and routine inspection, this spacer ring will provide years of dependable service, maintaining accurate bearing preload and driveline alignment.
This spacer ring is manufactured in an ISO 9001-certified facility using high-quality carbon steel sourced from approved mills. The raw material is tested for chemical composition and hardenability. The ring is precision-turned, heat-treated, and then ground to achieve the exact dimensions and surface finish required.
Every ring undergoes 100% dimensional inspection, including inner diameter, outer diameter, thickness, and face parallelism. We also perform hardness verification and surface roughness checks. Random samples are subjected to salt spray testing and thermal cycling to confirm corrosion resistance and dimensional stability. The rings are carefully packaged to prevent damage during transportation.
Our commitment to quality ensures a spacer ring that provides reliable axial positioning, protecting bearings and gears from premature wear. Backed by a comprehensive warranty, this ring offers peace of mind for fleet operators and owner-operators.
Choose genuine quality for your driveline spacing needs – choose the WG9725160065 OEM separation spacer ring.
The WG9725160065 Separation Spacer Ring is a small but crucial component that ensures precise axial positioning and correct bearing preload in your SINOTRUK Howo’s driveline. Its hardened steel construction, precision-ground faces, and accurate dimensions guarantee that your wheel hubs, differentials, and transmissions operate smoothly and efficiently, reducing wear and extending service life. It is the genuine solution you need.
By choosing this genuine OEM-quality spacer ring, you avoid the risks of incorrect bearing preload, excessive axial play, or premature component failure that can occur with inferior aftermarket parts. It is engineered for long-lasting performance, ensuring that every driveline assembly maintains its original specifications. The WG9725160065 delivers the reliability you expect from a genuine SINOTRUK Howo component.
Fleet operators will benefit from reduced driveline repairs, extended bearing life, and improved vehicle uptime. Owner-operators will gain confidence in their truck’s ability to handle heavy loads and demanding conditions without driveline issues. This spacer ring is the dependable choice for professionals who demand the best.
Invest in this OEM spacer ring and experience the difference that genuine quality makes. Its proven reliability and engineering excellence make it the smart choice for anyone who values performance and durability. The WG9725160065 sets the standard for spacer rings in heavy-duty trucks.
Order your WG9725160065 Separation Spacer Ring today and ensure your driveline remains precisely aligned and reliable for miles to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
