- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The 1B24981280156 Compressor Belt is a high-quality AV10X1065 V-belt specifically engineered to deliver reliable, efficient power transmission for FOTON air compressor systems used in SINOTRUK Howo heavy-duty trucks. As a trusted supplier of genuine Sinotruk howo parts, we offer this compressor belt as a direct OEM-grade replacement, manufactured to the exacting standards of the original equipment. The 1B24981280156 belt features a high-strength synthetic rubber compound, precision-wrapped aramid fiber tensile cords, and a specially engineered V-profile that ensures optimal grip, minimal slippage, and long-lasting performance under the high loads and temperature variations typical of heavy-duty truck compressor operations.
This 1B24981280156 V-belt is a critical component for maintaining correct compressor speed and air system pressure, ensuring reliable brake actuation and auxiliary air supply. Its robust construction resists oil, heat, and ozone, delivering dependable service over thousands of operating hours.
OEM-grade replacement • AV10X1065 profile • Aramid fiber reinforced • Oil and heat resistant
The 1B24981280156 is a premium V-belt designed specifically for FOTON air compressors installed on SINOTRUK Howo heavy-duty trucks. It replaces the original equipment belt with identical dimensions (AV10X1065 profile) and material specifications, ensuring perfect fitment and reliable power transmission.
This belt is manufactured using a high-modulus, low-stretch synthetic rubber compound reinforced with aramid fiber tensile cords. The aramid reinforcement provides exceptional strength and dimensional stability, preventing belt stretch and maintaining proper tension over extended service intervals. The V-shaped cross-section is precisely molded to match the pulley grooves, ensuring maximum contact area and efficient power transfer with minimal slip.
The belt’s outer fabric covering is treated to resist oil, grease, and ozone, which are common in engine compartments. The inner friction surface is designed to provide consistent grip even under high humidity and temperature fluctuations. The 1B24981280156 operates reliably in temperatures ranging from -40°C to +120°C, making it suitable for all climate conditions.
This compressor belt is a direct fit for FOTON compressor systems used in many SINOTRUK Howo models, ensuring that the air compressor operates at the correct speed to maintain adequate air pressure for braking and auxiliary systems.
The 1B24981280156 compressor belt is specifically designed for use with FOTON air compressors installed on SINOTRUK Howo heavy-duty trucks. It is compatible with a wide range of Howo models, including Howo A7, T7H, and other series that utilize the FOTON compressor with an AV10X1065 V-belt drive configuration.
This belt is suitable for both original equipment and replacement applications. It is commonly used in on-highway, off-road, construction, and mining operations, where reliable compressor operation is essential for maintaining brake air pressure and auxiliary pneumatic functions.
The 1B24981280156 is also compatible with many aftermarket compressor setups that use the same AV10X1065 belt size. Always verify the belt length and profile before installation to ensure proper fit.
When replacing, inspect the pulley grooves for wear or damage, and check the tensioner or adjustment mechanism for smooth operation to ensure optimal belt life.
Installing the 1B24981280156 compressor belt is a straightforward procedure that requires basic hand tools. Begin by ensuring the engine is off and cool, then locate the compressor drive pulley and tensioner mechanism.
Release tension on the old belt by loosening the tensioner or adjustment bolt. Remove the old belt and compare it with the new 1B24981280156 to confirm identical length and profile. Clean the pulley grooves with a wire brush to remove any debris or glazing.
Route the new belt over the pulleys according to the factory diagram, ensuring it sits correctly in all grooves. Apply tension per the manufacturer’s specification – typically, a deflection of 10-15 mm at mid-span under moderate thumb pressure. Secure the tensioner or adjustment bolt.
After installation, start the engine and run it at idle to check belt tracking and listen for any unusual noise. Re-check tension after a short break-in period, as new belts may stretch slightly.
Regular maintenance includes periodic inspection of the belt for cracks, glazing, or fraying. Replace the 1B24981280156 if any signs of wear are detected or if the belt has been in service for the recommended interval (typically 50,000 to 80,000 km). Also, check the tensioner and pulleys for smooth rotation and alignment.
The 1B24981280156 compressor belt is manufactured in an ISO 9001-certified facility, adhering to strict quality control standards. Each belt is produced using high-grade raw materials and is subjected to rigorous testing to ensure it meets or exceeds OEM performance requirements.
Tensile strength, elongation, and dimensional stability are verified through advanced testing equipment. The belt is also tested for oil resistance, heat aging, and ozone exposure to guarantee long-term durability in real-world operating conditions.
Our commitment to quality ensures that the 1B24981280156 delivers reliable, consistent performance, reducing the risk of compressor failure, loss of air pressure, and unplanned downtime. With a comprehensive warranty, this belt offers peace of mind for fleet operators and owner-operators alike.
Choose genuine quality for your compressor drive system – choose the 1B24981280156.
The 1B24981280156 compressor belt is a vital component that ensures your FOTON compressor operates at the correct speed to maintain adequate air pressure for braking and auxiliary systems. Its aramid fiber reinforcement, oil-resistant rubber, and precision V-profile deliver reliable power transmission and long service life.
By choosing this OEM-grade belt, you avoid the risks associated with inferior aftermarket alternatives, such as premature stretching, cracking, and slipping. The 1B24981280156 is engineered to maintain consistent tension and grip, reducing the risk of compressor under-speed and air system pressure drop.
Fleet operators will benefit from improved compressor reliability, reduced downtime, and lower replacement frequency. Owner-operators will gain confidence in their vehicle’s air supply, knowing that the drive system is protected by a genuine part.
Invest in the 1B24981280156 Compressor Belt and experience the difference that a genuine SINOTRUK Howo part makes. Its proven reliability and engineering excellence make it the smart choice for professionals who demand the best for their vehicles.
Order your 1B24981280156 today and ensure your truck’s compressor system performs at its best for miles to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
