- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The SH3001022-KF001 S35 Shims are precision-engineered adjustment components designed to provide accurate axle positioning and load distribution in SINOTRUK Howo heavy-duty trucks. As a trusted supplier of genuine Sinotruk howo parts, we offer these S35 shims as a direct OEM replacement, manufactured to the exacting standards of the original equipment. The SH3001022-KF001 shims are crafted from high-quality steel with a precision-ground thickness, featuring an S35 type design that ensures accurate clearance adjustment, optimal bearing preload, and extended service life under the extreme loads and harsh conditions typical of heavy-duty trucking.
These shims play a critical role in the proper setup of axle assemblies, allowing technicians to fine-tune the axial play of wheel bearings, differentials, and other rotating components. By providing precise thickness increments, the SH3001022-KF001 shims enable accurate adjustment of bearing preload, ensuring smooth operation, reduced wear, and optimal performance of the entire driveline. Their durable construction and corrosion-resistant coating ensure reliable service over thousands of miles, even in the most demanding operating environments.
OEM direct replacement • Precision-ground thickness • S35 type design • Corrosion-resistant coating
The SH3001022-KF001 S35 shims are precision-machined adjustment plates used in SINOTRUK Howo truck chassis applications to achieve accurate bearing preload and axial clearance in axle assemblies. They are designed to fit between the bearing and the axle housing or hub, providing a precise means of adjusting the end play of rotating components.
Manufactured from high-quality steel, the shims are ground to precise thickness tolerances, ensuring consistent and accurate adjustment. The S35 type design is compatible with standard axle configurations, and the shims are available in a range of thicknesses to accommodate various clearance requirements. The surface is treated with a corrosion-resistant coating that protects against rust and wear, even in harsh operating environments.
These shims are essential for maintaining the correct bearing preload, which is critical for preventing premature bearing failure, reducing noise and vibration, and ensuring optimal driveline performance. Their robust construction and precision manufacturing ensure that they meet the demanding requirements of heavy-duty trucking, providing reliable adjustment over extended service intervals.
The SH3001022-KF001 S35 shims are specifically designed for SINOTRUK Howo heavy-duty trucks, including Howo A7, T7H, and other models that use the S35 type axle configuration. They are used to adjust bearing preload in wheel hubs, differentials, and other rotating assemblies within the axle.
These shims are also compatible with many other commercial vehicles and industrial equipment that utilize the same shaft diameter and adjustment requirements. They are commonly found in construction machinery, agricultural equipment, and trailers where precise bearing adjustment is essential for performance and reliability.
When replacing, always verify the required thickness and ensure proper fit. The SH3001022-KF001 is a direct-fit component that simplifies maintenance and ensures optimal bearing preload.
Installing the SH3001022-KF001 shims requires proper measurement and careful attention to bearing preload specifications. Begin by disassembling the axle hub or differential and removing the old shims. Clean the mounting surfaces thoroughly to remove any dirt or debris.
Using the appropriate thickness shim, place it between the bearing and the housing or hub. Ensure the shim is properly centered and seated against the bearing race. Reassemble the axle and tighten the retaining nut to the manufacturer’s specified torque. Rotate the assembly and check the bearing preload using a spring scale or other measuring tool.
If the preload is not within specification, adjust by adding or removing shims of different thicknesses. Re-check the preload after each adjustment until the correct value is achieved. Proper preload is essential for preventing premature bearing wear and ensuring optimal driveline performance.
Regular inspection of the shims is recommended during routine maintenance. Look for signs of corrosion, deformation, or wear. If the shims show any damage, replace them immediately to maintain proper bearing preload.
The SH3001022-KF001 shims are manufactured in an ISO 9001-certified facility, with rigorous quality controls applied throughout the production process. The steel is sourced from approved mills and undergoes chemical analysis to ensure compliance with S35 type specifications.
Each shim is ground to precise thickness tolerances and inspected for dimensional accuracy, including inner and outer diameters, thickness, and surface finish. The surface coating is verified for thickness and adhesion to ensure long-lasting corrosion protection. We also perform random sample testing for hardness and flatness to confirm that the shims meet OEM performance requirements.
Our commitment to quality ensures that the SH3001022-KF001 delivers reliable, consistent adjustment performance, reducing the risk of bearing preload errors and subsequent driveline issues. With a comprehensive warranty, these shims offer peace of mind for fleet operators and owner-operators alike.
Choose genuine quality for your chassis adjustments – choose the SH3001022-KF001.
The SH3001022-KF001 S35 shims are essential components for maintaining the correct bearing preload and axle adjustment in your SINOTRUK Howo truck. Their precision-ground thickness, high-quality steel construction, and corrosion-resistant coating provide reliable adjustment capability, ensuring optimal driveline performance and extending component life.
By choosing this OEM-quality shim, you eliminate the risks of inaccurate adjustment, premature bearing wear, and potential driveline failure associated with non-genuine alternatives. The SH3001022-KF001 is engineered to deliver consistent performance, reducing maintenance frequency and safeguarding your vehicle’s driveline reliability.
Fleet operators will benefit from improved driveline performance and reduced bearing-related issues. Owner-operators will gain peace of mind knowing that their axle adjustments are made with a part that meets the highest quality standards.
Invest in the SH3001022-KF001 S35 Shims and experience the difference that a genuine SINOTRUK Howo part makes. Its proven reliability and engineering excellence make it the smart choice for professionals.
Order your SH3001022-KF001 today and ensure your truck’s axle adjustments are precise and reliable for miles to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
