- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The LVBS7PEB8NTO66456 Clutch Assembly with Axle Sleeve is a factory-matched, heavy-duty driveline component engineered to deliver reliable power engagement and torque transmission for SINOTRUK Howo commercial vehicles. As a leading provider of genuine Sinotruk howo parts, we offer this complete clutch assembly as a direct OEM replacement, combining the clutch disc, pressure plate, release bearing, and an integrated axle sleeve into a pre-balanced, ready-to-install unit. The LVBS7PEB8NTO66456 is engineered with high-grade ceramic-metallic friction material, a performance-tuned diaphragm spring, and a precision-ground axle sleeve that ensures accurate alignment between the transmission and driveline, minimizing vibration and maximizing component life.
This assembly is essential for maintaining efficient power flow from the engine to the wheels, providing consistent clutch engagement, a linear pedal feel, and reliable operation under heavy loads and frequent gear changes. The integrated axle sleeve eliminates the need for separate alignment tools, streamlining installation and reducing the potential for misalignment errors. The LVBS7PEB8NTO66456 is built to handle the high torque outputs and thermal stresses common in heavy-duty trucking, ensuring dependable performance over extended service intervals and in the most demanding operating environments.
OEM direct replacement • Integrated axle sleeve • High-torque ceramic-metallic disc • Pre-balanced assembly
The LVBS7PEB8NTO66456 is a complete clutch assembly that incorporates the clutch disc, pressure plate, release bearing, and a dedicated axle sleeve into a single, factory-balanced unit. This integrated design simplifies installation and guarantees that all components are perfectly matched for optimal performance and service life.
The clutch disc features a high-grade ceramic-metallic friction lining that delivers exceptional torque capacity and outstanding heat dissipation, making it ideal for heavy-duty applications. The pressure plate is equipped with a heavy-duty diaphragm spring that ensures consistent clamp load and smooth engagement characteristics. The release bearing is pre-lubricated and sealed to minimize maintenance requirements.
The integrated axle sleeve is precisely machined to ensure accurate alignment between the transmission output shaft and the driveline, reducing vibration and wear on universal joints and bearings. This assembly is dynamically balanced to minimize rotational vibration, ensuring smooth operation across the entire engine speed range and enhancing driver comfort.
The LVBS7PEB8NTO66456 clutch assembly with axle sleeve is specifically engineered for SINOTRUK Howo heavy-duty trucks, including Howo A7, T7H, and other models equipped with a 430 mm clutch system and the corresponding axle sleeve interface. It is suitable for vehicles with manual transmissions and high-torque engines.
This assembly is ideal for a wide range of applications, including long-haul trucking, regional distribution, construction, and mining, where reliable clutch engagement and durable driveline components are essential for productivity and safety.
When replacing, always verify the clutch disc diameter and axle sleeve length to ensure compatibility. The LVBS7PEB8NTO66456 is a direct-fit component that simplifies procurement and installation.
Installing the LVBS7PEB8NTO66456 clutch assembly requires careful attention to cleanliness and alignment. Begin by removing the transmission and old clutch components, then thoroughly clean the flywheel surface and the transmission input shaft.
Place the new clutch disc onto the flywheel using the alignment tool (included with the assembly), then install the pressure plate and torque the bolts to the manufacturer’s specification in a star pattern. Slide the axle sleeve onto the transmission output shaft, ensuring it engages with the driveline coupling.
Reinstall the transmission and connect the clutch linkage. Bleed the hydraulic system if necessary. After installation, test the clutch operation by depressing the pedal and checking for smooth engagement and disengagement.
Regular maintenance includes inspecting the clutch for wear, checking the release bearing for smooth operation, and ensuring the axle sleeve is properly lubricated. Replace the assembly if any signs of excessive wear, scoring, or damage are detected.
The LVBS7PEB8NTO66456 clutch assembly is manufactured in an ISO 9001-certified facility, with stringent quality controls at every stage. The friction material is bonded to the disc using high-temperature adhesives, and the pressure plate is tested for clamp load consistency.
Each assembly is dynamically balanced to ensure smooth operation, and the release bearing is tested for axial play and sealing integrity. We also perform random sample testing for torque capacity and thermal durability to confirm that the assembly meets OEM performance requirements.
Our commitment to quality ensures that the LVBS7PEB8NTO66456 delivers reliable, consistent driveline performance, reducing the risk of clutch slip, judder, and premature failure. With a comprehensive warranty, this assembly offers peace of mind for fleet operators and owner-operators alike.
Choose genuine quality for your drivetrain – choose the LVBS7PEB8NTO66456.
The LVBS7PEB8NTO66456 clutch assembly with axle sleeve is a comprehensive, integrated solution for maintaining the driveline performance of your SINOTRUK Howo truck. Its advanced friction material, heavy-duty construction, and pre-balanced design ensure smooth power delivery, reduced vibration, and extended component life.
By choosing this OEM-grade assembly, you eliminate the risks of mismatched components, improper alignment, and premature failure associated with non-genuine parts. The LVBS7PEB8NTO66456 is engineered to deliver consistent performance, reducing driveline downtime and maintenance costs.
Fleet operators will benefit from improved driver comfort, reduced clutch wear, and increased vehicle availability. Owner-operators will gain confidence in their truck’s driveline, knowing that critical components meet the highest quality standards.
Invest in the LVBS7PEB8NTO66456 Clutch Assembly with Axle Sleeve and experience the difference that a genuine SINOTRUK Howo part makes. Its proven reliability and engineering excellence make it the smart choice for professionals.
Order your LVBS7PEB8NTO66456 today and ensure your truck’s drivetrain delivers maximum efficiency and durability for miles to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
