- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The SPWL0000000261 Elastic Retaining Ring WB43340 × 2.4 For Shaft is a precision-engineered external snap ring designed to secure gears, bearings, and other components on shafts in heavy-duty driveline applications. As a leading supplier of genuine Sinotruk Homan parts, we offer this retaining ring as a direct OEM replacement for SINOTRUK Homan transmissions, gearboxes, and axle assemblies. The SPWL0000000261 features a high-strength spring steel construction with optimized geometry, providing consistent clamping force, exceptional fatigue resistance, and reliable retention under extreme loads and vibration.
This elastic retaining ring (also known as a circlip or snap ring) is critical for maintaining axial positioning of rotating components, preventing unwanted movement that can lead to misalignment, excessive wear, or catastrophic failure. Its design allows for easy installation and removal using standard pliers, while its precision-formed shape ensures a snug fit in the designated groove. The SPWL0000000261 is manufactured to exacting tolerances, guaranteeing compatibility with original equipment shafts and reducing the risk of premature loosening.
OEM direct replacement • High-strength spring steel • Consistent clamping force • Easy installation
The SPWL0000000261 is an external retaining ring designed to fit into a machined groove on a shaft. Its elastic nature allows it to expand during installation and then snap securely into place, providing a positive mechanical stop that prevents axial movement of mounted components. The “WB43340 × 2.4” designation indicates the nominal shaft diameter (43.40 mm) and the ring thickness (2.4 mm), ensuring precise fitment in SINOTRUK Homan driveline applications.
Manufactured from high-quality spring steel, this ring undergoes a controlled heat treatment process to achieve the optimal balance of hardness and elasticity. The material is then coated with a corrosion-resistant finish, ensuring long-lasting performance even in harsh under-vehicle conditions where moisture, salt, and debris are present.
The precision-formed profile ensures uniform contact with the groove, maximizing holding power and minimizing stress concentrations that could lead to ring fatigue or shaft damage. Whether used in a transmission mainshaft, a differential pinion, or an axle assembly, the SPWL0000000261 provides reliable retention that contributes to the overall durability and safety of the driveline system.
The SPWL0000000261 elastic retaining ring is specifically designed for SINOTRUK Homan heavy-duty trucks, including Howo A7, T7H, and the Homan series. It is used in transmission assemblies, auxiliary gearboxes, and differential pinion shafts to secure gears, synchronizers, and bearings in their axial positions. The WB43340 × 2.4 dimension corresponds to a common shaft size in these drivetrain components.
This retaining ring is also compatible with many other commercial vehicles and industrial equipment that use a 43.40 mm nominal shaft groove specification. It is commonly found in agricultural machinery, construction equipment, and marine transmissions where reliable shaft retention is critical.
When replacing retaining rings, always verify the shaft groove dimensions and the ring thickness to ensure proper fit. The SPWL0000000261 is a direct replacement that eliminates fitment issues, saving time and ensuring correct clamping force.
Installing the SPWL0000000261 retaining ring is a straightforward process when proper tools and techniques are used. Begin by cleaning the shaft groove and the surrounding area to remove any dirt, burrs, or old lubricant. Inspect the groove for wear or damage; if the groove is worn beyond specification, the shaft may need to be replaced or reconditioned.
Using the correct snap-ring pliers (with pins that fit the ring’s holes), gently expand the ring and slide it over the shaft until it aligns with the groove. Release the pliers, allowing the ring to snap into place. Ensure that the ring is fully seated in the groove and that there is no gap between the ring and the groove shoulder. A properly seated ring will rotate freely but show no axial play.
For removal, use the same pliers to expand the ring and slide it off the shaft. Take care not to over-expand the ring, as this can cause permanent deformation. After removal, inspect the ring for any signs of fatigue, such as cracks or loss of elasticity. If the ring shows any damage, replace it with a new SPWL0000000261 to ensure continued retention reliability.
Regular inspection of retaining rings during routine maintenance is recommended. Look for signs of corrosion, pitting, or distortion. Replacing the ring at the first sign of degradation can prevent more serious driveline issues.
The SPWL0000000261 retaining ring is manufactured in an ISO 9001-certified facility, adhering to the strictest quality control standards. The spring steel is sourced from reputable mills and undergoes chemical analysis to verify its composition. Heat treatment is precisely controlled to achieve the optimal hardness and elasticity for consistent clamping force.
Each ring is 100% inspected for critical dimensions, including free diameter, groove diameter, thickness, and hole alignment. We also perform random load-deflection tests to confirm that the ring’s spring rate meets OEM specifications. Surface finish and coating thickness are verified using calibrated instruments.
Our quality assurance team ensures that the SPWL0000000261 consistently meets or exceeds the performance requirements of SINOTRUK Homan driveline applications. With a comprehensive warranty, this retaining ring offers peace of mind for even the most demanding operating conditions.
By choosing this OEM-grade ring, you are investing in reliability and safety, reducing the risk of component loosening and subsequent damage.
The SPWL0000000261 elastic retaining ring is a small but critical component that ensures the axial stability of gears and bearings in your SINOTRUK Homan drivetrain. Its robust construction, precise dimensions, and reliable clamping force provide the retention needed to maintain proper component alignment and prevent costly failures.
By choosing this OEM-quality retaining ring, you eliminate the risks associated with non-genuine parts, such as incorrect fit, insufficient holding power, and premature fatigue. The SPWL0000000261 is engineered to meet the highest standards, delivering consistent performance and peace of mind.
Fleet operators will benefit from reduced maintenance intervals and increased uptime. Owner-operators will gain confidence in their vehicle’s reliability, knowing that critical component retention is ensured by a quality part.
Invest in the SPWL0000000261 Elastic Retaining Ring WB43340 × 2.4 For Shaft and experience the difference that a genuine SINOTRUK Homan part makes. Its proven design and durability make it the smart choice for professionals.
Order your SPWL0000000261 today and keep your drivetrain securely assembled for miles to come.
If you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
