- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The SPYJ0000001260 Connecting Rod Bearing Bush (Upper) is a precision-engineered component designed to ensure reliable crankshaft support and durability in SINOTRUK Homan heavy-duty engines. As a trusted provider of genuine Sinotruk Homan parts, we offer this upper bearing bush as a direct OEM replacement, manufactured to the exact specifications of the original equipment. The SPYJ0000001260 bearing bush features a multi-layer steel-backed structure with a high-performance bearing overlay, providing exceptional fatigue resistance, conformability, and embeddability. This ensures optimal lubrication, reduced friction, and extended service life even under the extreme cylinder pressures and temperatures common in modern turbo-diesel engines.
This upper connecting rod bearing bush is critical for maintaining the correct oil film thickness between the connecting rod and the crankshaft journal. Its precision-machined inner diameter and carefully controlled wall thickness guarantee the proper bearing clearance, which is essential for preventing metal-to-metal contact, minimizing wear, and avoiding catastrophic engine failure. The upper bush is installed in the connecting rod body, working in concert with the lower shell to evenly distribute loads across the bearing surface.
OEM direct replacement • Multi-layer steel-backed • Precision clearance • High fatigue strength
The SPYJ0000001260 upper connecting rod bearing bush is a vital component of the engine’s rotating assembly. It is manufactured using a high-strength steel backing, overlaid with a thin layer of bearing material – typically a copper-lead or aluminum-tin alloy – that provides excellent conformability and anti-seizure properties. This design ensures that the bearing can accommodate slight misalignments and embed any microscopic debris that may pass through the oil filter.
The bearing bush features precision-machined oil grooves and holes that facilitate the distribution of engine oil, maintaining a hydrodynamic film between the bush and the crankshaft journal. This film is essential for reducing friction, dissipating heat, and preventing direct metal contact, which would lead to rapid wear and potential seizure. The upper bush is distinguished by a locating tang or a specific identification mark to ensure correct installation orientation.
Designed to meet the stringent demands of SINOTRUK Homan engines, the SPYJ0000001260 undergoes rigorous quality control, including dimensional inspection, hardness testing, and fatigue validation. Its exacting tolerances ensure that the bearing clearance remains within the manufacturer’s recommended range, optimizing engine performance and longevity. Whether used in an overhaul or as a routine replacement, this bearing bush is a vital investment in engine reliability.
The SPYJ0000001260 connecting rod bearing bush is specifically engineered for SINOTRUK Homan heavy-duty engines, including those used in Howo A7, T7H, and Homan series trucks. It is compatible with engines featuring a crankshaft journal diameter of 84.00 mm and a connecting rod width of 38.00 mm. This upper bush is typically used in conjunction with the lower shell (sold separately) to form a complete bearing set.
This bearing bush is also used in many other commercial vehicle engines with similar specifications, making it a versatile choice for workshops and fleets. It is suitable for both in-line and V-type engine configurations commonly found in heavy-duty transport, construction, and mining equipment.
When performing an engine overhaul, it is essential to replace all connecting rod bearing bushes and shells as a set to maintain uniform clearance and load distribution. The SPYJ0000001260 ensures that the upper half of the bearing receives the same high-quality standard as the original part, guaranteeing reliable engine operation.
Installing the SPYJ0000001260 upper bearing bush requires meticulous attention to cleanliness and precision. Begin by thoroughly cleaning the connecting rod bore and cap, removing all old bearing material, oil, and debris. Inspect the crankshaft journal for scoring, ovality, or taper; if any damage is found, the crankshaft must be reground or replaced.
Place the upper bush into the connecting rod body, ensuring that the locating tang engages correctly with the slot in the rod. The bush should snap into place and sit flush with the rod surface. Apply a thin, even layer of clean engine oil or assembly lube to the bearing surface. Install the lower shell and cap, then torque the bolts to the manufacturer’s specified value in the correct sequence. Rotate the crankshaft to check for smooth movement and verify that the bearing clearance is within acceptable limits using a plastigauge or micrometer.
During operation, proper maintenance of the engine oil and filter is critical for bearing longevity. Regularly change the oil and filter at recommended intervals, and monitor oil pressure for any sudden drops, which may indicate bearing wear. If the engine develops a knocking noise, especially under load, inspect the bearings immediately.
Reusing old connecting rod bolts is not recommended; always replace them with new ones to ensure correct clamping force. Following these guidelines will help maximize the service life of the SPYJ0000001260 bearing bush and protect the engine from costly damage.
The SPYJ0000001260 bearing bush is manufactured in an ISO 9001-certified facility, adhering to the strictest quality control standards. The steel backing is sourced from premium mills, and the overlay material is applied using precision electroplating or sintering processes to ensure uniform thickness and bond strength.
Each bush is 100% inspected for dimensional accuracy, including wall thickness, inner diameter, and width. Surface roughness and oil groove geometry are verified using advanced optical and contact measurement systems. We also perform random destructive testing, such as peel strength and fatigue tests, to confirm that the bearing meets or exceeds OEM performance requirements.
Our quality team ensures that the SPYJ0000001260 delivers consistent, reliable performance in the field. The combination of high-quality materials and precision manufacturing results in a bearing bush that provides long service life and protects the engine from catastrophic failure.
With our commitment to quality, you can trust this bearing bush to perform as expected in the most demanding engine applications.
The SPYJ0000001260 connecting rod bearing bush is an essential component for maintaining the integrity and performance of your SINOTRUK Homan engine. Its precision engineering, high-quality materials, and exacting tolerances ensure that the connecting rod operates smoothly and reliably, even under extreme loads and high temperatures.
By choosing this OEM-grade bearing bush, you avoid the risks of substandard aftermarket parts, such as improper clearance, poor oil retention, and premature wear. The SPYJ0000001260 is designed to deliver consistent performance, protecting the crankshaft and connecting rod from friction-related damage and extending engine life.
Fleet operators will benefit from reduced overhaul frequency and lower maintenance costs. Owner-operators will gain confidence in their engine’s durability, knowing that critical rotating components are supported by a part that meets the highest standards.
Invest in the SPYJ0000001260 Connecting Rod Bearing Bush (Upper) and experience the difference that a genuine SINOTRUK Homan part makes. Its proven reliability and durability make it the intelligent choice for professionals who demand excellence.
Keep your engine running strong with this premium bearing bush – order your SPYJ0000001260 today.
If you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
