- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The SPYJ0000001222 Upper Bearing Bush (Wide) is a heavy-duty, precision-machined bushing designed to provide superior load distribution and wear resistance in the suspension articulation points of SINOTRUK Sitrak trucks. This OEM-grade component features an extended width design that increases the contact surface area, reducing bearing stress and extending service life in demanding on- and off-road applications. As a critical element among Sinotruk Sitrak parts, the SPYJ0000001222 is manufactured from high-strength bronze alloy with a self-lubricating internal structure, ensuring consistent performance under heavy radial loads and oscillating movements. This upper bearing bush is a direct replacement for the original component, guaranteeing perfect fitment and reliable operation in the vehicle’s front and rear suspension systems.
Upper Bearing Bush (Wide)
Верхняя втулка подшипника (широкая)
Buje de Rodamiento Superior (Ancho)
The SPYJ0000001222 is a wide-profile upper bearing bush used in the pivot joints of SINOTRUK Sitrak leaf spring suspensions and equalizer beam assemblies. Its increased axial width, compared to standard bushes, provides a larger load-bearing surface, which significantly reduces the contact pressure between the pin and the bush. This design minimizes wear and elongation, ensuring stable axle alignment and consistent ride height over extended mileage.
Machined from centrifugally cast bronze with a uniform grain structure, the bush incorporates a spiral oil groove and a network of micropores that retain lubricant, reducing friction and preventing seizure during high-load articulation. The SPYJ0000001222 is precision-honed to exacting internal diameters, guaranteeing a controlled interference fit with the pivot pin and housing, eliminating play and reducing noise, vibration, and harshness (NVH) levels.
Wide Bearing Surface: The extended width of the bush distributes radial loads over a larger area, reducing edge loading and preventing premature wear of both the bush and the mating pin.
Self-Lubricating Bronze Alloy: The material is a high-leaded tin-bronze (CuSn10P) with a built-in lubricant reservoir, ensuring consistent low-friction operation even in intermittent lubrication conditions.
Precision Honed Bore: The internal diameter is finished to H7 tolerance, guaranteeing a precise fit on the pivot pin and eliminating radial clearance that can lead to knocking and accelerated wear.
Corrosion Resistant: The bronze material is inherently resistant to rust and chemical attack from road salts and moisture, ensuring long-term durability in harsh environments.
Additionally, the SPYJ0000001222 is designed with a chamfered lead-in for easy assembly, and its outer diameter is precision-ground to ensure a press-fit installation without the need for additional retainers. These features make it a preferred choice for suspension rebuilds and preventive maintenance programs.
The table below provides all critical dimensions and material properties for the SPYJ0000001222. These specifications are verified against SINOTRUK original equipment standards.
All dimensions conform to ISO 286 and DIN 1494 standards for plain bearings. Always verify the housing bore and pin diameter before installation to ensure correct interference fit.
The SPYJ0000001222 is specifically designed for the upper pivot points of SINOTRUK Sitrak leaf spring suspensions, including the front axle spring pins and the rear equalizer beam bushings. Its wide profile makes it particularly suitable for heavy-haul applications where lateral stability and load distribution are critical.
This bush is also compatible with many other heavy-duty trucks and trailers that use a 40mm pin diameter and a 50mm housing bore, making it a versatile replacement part for workshops. Always cross-reference the dimensions with your vehicle’s service manual to ensure proper fitment.
Installation Guide: Thoroughly clean the housing bore and the pivot pin. Apply a thin layer of high-pressure grease to the outer diameter of the bush and the bore. Use a hydraulic press with a suitable mandrel to insert the SPYJ0000001222 squarely into the housing until it seats against the shoulder. Ensure that the oil groove aligns with the lubrication hole in the housing (if present). Never hammer the bush directly.
Maintenance Advice: Regularly inspect the bushing for signs of wear, scoring, or excessive clearance. Lubricate the pivot pin through the grease nipple at the recommended intervals. Replace the SPYJ0000001222 if you detect radial play or if the pin shows signs of abnormal wear. Always replace both upper and lower bushes simultaneously to maintain balanced suspension geometry.
Using a genuine SPYJ0000001222 ensures the correct material composition and hardness, which are essential for preventing premature deformation and wear. Avoid using generic bushes that may not meet the required load and temperature specifications.
Selecting the authentic SPYJ0000001222 gives you the assurance of a component that has been validated for fatigue life, wear resistance, and dimensional stability under extreme loads. Unlike aftermarket alternatives, this bush is manufactured using a controlled casting process that ensures uniform material density and consistent mechanical properties.
The SPYJ0000001222 is backed by SINOTRUK’s quality assurance, and its wide design has been proven to extend the service interval of suspension pivot points by up to 30%. Fleet operators report reduced tire wear and improved handling after installing genuine wide bushes.
The SPYJ0000001222 complies with ISO 4379 for bronze plain bearings and DIN 1494 for bushing dimensions. It is manufactured under IATF 16949 certified quality management systems, ensuring consistent production quality.
To avoid counterfeits, purchase this bush only from authorized SINOTRUK distributors. Genuine bushes are stamped with the part number and have a characteristic bronze color with a smooth, polished finish. Using non-certified bushes can lead to rapid wear, suspension misalignment, and unsafe vehicle operation.
Over time, even the robust SPYJ0000001222 may experience wear. Symptoms of a worn bush include knocking noises from the suspension, uneven tire wear, and steering wander. If you notice these signs, inspect the bush and the pivot pin. If the bush exhibits scoring or the pin has a stepped wear pattern, replace both components.
Insufficient lubrication is a common cause of premature failure. Ensure that the grease passages are clear and that the correct type of chassis grease is used. If the bush has seized to the pin, it may require cutting for removal. Always use a new SPYJ0000001222 and a new pin if the old pin is damaged to restore proper fit and alignment.
SINOTRUK is committed to sustainable manufacturing practices. The SPYJ0000001222 is produced using recycled bronze and energy-efficient casting methods, reducing the carbon footprint of each component. Its extended service life reduces the frequency of replacements, minimizing waste.
By maintaining proper lubrication and replacing the bush only when necessary, you contribute to resource conservation. Used bronze bushes can be recycled at metal recovery facilities, supporting a circular economy. Choosing genuine parts also reduces the environmental impact associated with frequent repairs and premature component failure.
The SPYJ0000001222 Upper Bearing Bush (Wide) is an essential component for maintaining the structural integrity and ride quality of SINOTRUK Sitrak heavy-duty trucks. Its extended bearing surface, robust bronze construction, and precision fitment ensure reliable performance and long service life in the most demanding applications.
In this guide, we have covered the bush’s features, technical data, installation best practices, and environmental benefits. With this information, you can confidently choose the genuine component that maximizes suspension durability, reduces maintenance costs, and enhances vehicle safety.
Explore our full range of authentic SINOTRUK Sitrak components and keep your fleet operating at peak performance. Choose the SPYJ0000001222 – the trusted upper bearing bush solution for professionals worldwide.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
