- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The A5000-1111100-C27R injection pump is a genuine SINOTRUK HOWO component engineered to deliver precisely metered, high‑pressure fuel to the engine’s injectors. As a critical element of the trusted Sinotruk howo parts family, this pump ensures optimal combustion timing and fuel atomization, directly impacting power output, fuel efficiency, and emission compliance. Manufactured from high‑strength alloy castings with precision‑ground plungers and delivery valves, the A5000-1111100-C27R unit withstands the extreme pressures and temperatures of heavy‑duty diesel operation. Its robust construction guarantees consistent performance, reduced fuel consumption, and long‑term durability in mining, construction, and long‑haul applications. Investing in this authentic component ensures your Howo engine maintains peak efficiency and reliability.
Injection Pump
Топливный насос
Bomba de inyección
The A5000-1111100-C27R injection pump features a robust inline or rotary design (depending on engine application) with precision‑ground plungers and barrels that maintain microscopic clearances for leak‑free high‑pressure generation. The camshaft and roller tappets are made from case‑hardened alloy steel, ensuring long life even under continuous high‑load operation. An integrated mechanical or electronic governor (as per engine type) provides precise speed control and prevents over‑revving. The pump is calibrated to deliver the exact fuel quantity for each cylinder, optimizing combustion and minimizing emissions.
Each A5000-1111100-C27R pump undergoes 100% testing on a hydraulic test bench to verify delivery rate, timing, and pressure characteristics across the entire operating range. The housing is pressure‑tested to ensure no internal or external leaks. All moving parts are lubricated by engine oil, and the pump includes a manual priming pump for easy bleeding after filter changes. This meticulous quality control guarantees that the injection pump will provide reliable fuel delivery for hundreds of thousands of kilometers.
The table below provides detailed technical data for the genuine SINOTRUK HOWO A5000-1111100-C27R injection pump. These specifications are essential for verifying compatibility.
| Parameter | Specification | Details |
|---|---|---|
| OEM Part Number | A5000-1111100-C27R | SINOTRUK HOWO Original Code |
| Product Name | Injection Pump (Complete Assembly) | For diesel engines |
| Pump Type | Inline / Rotary (as per engine) | High pressure |
| Max Injection Pressure | 1800 bar (common‑rail) / 900 bar (inline) | Depending on engine type |
| Number of Plungers | 6 (for in‑line six engines) | Case‑hardened |
| Plunger Diameter | 10 mm (nominal) | Precision ground |
| Governor Type | Mechanical / Electronic | Speed control |
| Lubrication | Engine oil (splash) | Integrated with engine |
| Weight (approx.) | 18 kg | Complete assembly |
| Applicable Engines | WD615, MC11, MC13, D10 | Check engine code |
The A5000-1111100-C27R injection pump is a direct OEM replacement for the fuel injection systems used on Howo heavy‑duty trucks, including the widely used WD615 series (Euro‑2 to Euro‑5), the MC11 and MC13 engines in T7H and C7H models, as well as the D10 engines. It delivers precisely timed fuel pulses to each cylinder, ensuring complete combustion and maximum power output. The pump’s design varies slightly depending on whether the engine uses unit injectors or a common‑rail system, but all variants share the same high‑quality manufacturing standards.
In chassis applications, the injection pump is driven by the engine’s timing gears and is exposed to constant vibration and heat. A failing pump can cause misfires, power loss, excessive smoke, and even engine stalling. The genuine A5000-1111100-C27R pump restores original performance and ensures that fuel delivery timing and quantity meet the engine’s demanding requirements. It is also used in remanufactured engines and as a standard replacement part during major overhauls.
When replacing the injection pump, always set the timing marks according to the service manual. Use new fuel lines and seals. Prime the system thoroughly before starting to avoid air locks.
Correct installation of the A5000-1111100-C27R injection pump is critical to ensure proper engine timing and long service life. Follow these steps:
Disconnect the battery and relieve fuel pressure. Remove the timing gear cover and rotate the engine to top dead center. Mark the timing gears for reference.
Install the new pump with a new gasket, aligning the drive gear marks. Torque mounting bolts to the specified value. Connect fuel lines and electrical connectors (if applicable).
Prime the fuel system using the manual primer. Start the engine and check for leaks. Verify injection timing with a diagnostic tool and adjust if necessary.
A failing injection pump can cause severe performance issues. Common signs that replacement is needed include:
If any of these symptoms are observed, immediate replacement with a genuine A5000-1111100-C27R injection pump is recommended. Continuing to operate with a worn pump can damage injectors and cause catastrophic engine failure.
Precision‑ground plungers and calibrated delivery valves ensure consistent injection pressure and quantity, optimizing combustion and power.
By maintaining correct injection timing, the pump reduces cylinder pressure spikes and soot formation, prolonging the life of pistons, rings, and bearings.
Factory‑set timing and fuel maps ensure that the engine meets emission standards and delivers rated horsepower without the need for field adjustments.
To maximize the service life of your A5000-1111100-C27R injection pump, follow these best practices:
By adhering to these guidelines, you ensure that the A5000-1111100-C27R pump performs optimally throughout its intended service interval.
Aftermarket injection pumps often use inferior materials, incorrect plunger clearances, and poorly calibrated governors, leading to erratic fuel delivery, smoke, and even engine runaway. The genuine A5000-1111100-C27R is manufactured to the exact specifications of the original equipment, using high‑grade alloy steels and precision machining. Each pump is dynamically tested on a calibration bench to ensure that fuel delivery, timing, and governor response match the original design.
By choosing authentic SINOTRUK HOWO parts, you protect your investment and ensure your truck maintains its power, fuel economy, and resale value. The Sinotruk howo parts catalog includes a full range of fuel system components engineered for maximum durability. For fleet managers and owner‑operators who demand the best, the genuine A5000-1111100-C27R is the only responsible choice.
The A5000-1111100-C27R injection pump is used across a wide range of Howo models: T7H, A7, and classic Howo‑7 series equipped with WD615, MC11, MC13, and D10 engines. Always verify the pump mounting flange and drive coupling type using the service manual; different power ratings may have minor variations in calibration.
Each A5000-1111100-C27R is individually packaged in a protective crate with foam inserts to prevent damage during shipping. The package includes the injection pump only; mounting gaskets and fuel lines must be ordered separately.
Production of the A5000-1111100-C27R takes place in IATF 16949 certified facilities, using precision machining centers and automated calibration stands. Statistical process control ensures that every pump meets the stringent requirements for fuel delivery and timing accuracy. Every batch is accompanied by a material certificate and calibration test report, guaranteeing that the pumps delivered are identical to those fitted on new Howo trucks at the factory.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
