- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
OEM 430-1012020B The oil filter is the guardian of your engine’s health, continuously removing contaminants, soot, and wear particles from the lubricating oil to prevent premature wear of critical components. The genuine SINOTRUK HOWO 430-1012020B Oil Filter is an OEM‑grade component engineered for a perfect fit and long‑term durability. As a vital element of the trusted Sinotruk howo parts family, this oil filter is crafted with high-strength, heat-resistant materials to endure harsh, high-pressure conditions in truck engines—effectively protecting key components like bearings, crankshafts, and turbochargers from premature wear and helping maintain consistent engine performance even during heavy-load or long-distance operations.
The 430-1012020B utilizes a proprietary blend of synthetic and cellulose fibers, providing high efficiency and dirt-holding capacity to trap harmful particles.
A robust, corrosion-resistant steel housing withstands high oil pressures and protects the filter element from damage, ensuring reliable operation.
Engineered with heat-resistant adhesives and seal materials to withstand the extreme temperatures of heavy-duty diesel engines without failure.
A built-in silicone anti-drain back valve keeps oil in the filter when the engine is off, preventing dry starts and reducing engine wear on startup.
| Parameter | Specification | Details |
|---|---|---|
| OEM Part Number | 430-1012020B | SINOTRUK HOWO Original |
| Product Name | Oil Filter | Full-flow spin-on type |
| Filter Media | Synthetic blend / Micro-glass | High efficiency, high capacity |
| Filtration Efficiency | ≥ 99% at 20 microns | ISO 4548-12 |
| Burst Pressure | ≥ 1.8 MPa (260 psi) | Robust steel canister |
| Thread Size | M24 x 1.5 (typical) | OEM specific |
| Gasket Outer Diameter | 80 mm (approx.) | Nitrile rubber |
| Anti-Drain Valve | Silicone, integrated | Prevents dry starts |
| By-Pass Valve Setting | 1.5 bar (22 psi) differential | Ensures oil flow if filter clogs |
| Temperature Range | -40°C to +120°C | Continuous operation |
| Compatible Engines | SINOTRUK WD615, WD618, MC series | Lube system |
The oil filter may seem like a simple service item, but it is the first line of defense against engine wear. A clogged or inefficient filter allows abrasive particles to circulate, rapidly wearing bearings, crankshaft journals, and turbocharger shafts. The genuine SINOTRUK HOWO 430-1012020B filter is engineered with high-strength, heat-resistant materials and precision filtration media to endure harsh conditions, effectively protecting key components from premature wear and ensuring long engine life.
The 430-1012020B filter is assembled in cleanroom conditions. The pleated media is precisely wound and bonded to end caps to ensure all oil passes through the filter, with no bypass leaks.
Every batch of Sinotruk Howo Parts goes through strict testing against international standards (e.g., ISO, CE) and Sinotruk’s original specs. Filters are sample-tested for burst pressure, efficiency, and media integrity.
The development of the 430-1012020B Oil Filter focused on providing a reliable barrier against contaminants under all operating conditions. These filters are subjected to high oil pressures, extreme temperatures, and prolonged service intervals. A failed filter can lead to rapid engine wear and costly repairs. This genuine component is engineered to maintain its structural integrity and filtration efficiency for the recommended oil change interval.
The media formulation of the 430-1012020B is critical. A blend of synthetic fibers and cellulose is designed to capture particles as small as a few microns while allowing adequate oil flow. The media is pleated to increase surface area, maximizing dirt-holding capacity. A steel center tube prevents the media from collapsing under pressure.
Quality control for the 430-1012020B is exhaustive. In addition to 100% visual inspection, sample filters are tested for burst pressure, collapse resistance, and filtration efficiency using ISO test protocols. The anti-drain back valve and by-pass valve are also tested for proper operation. Only components that pass all these rigorous checks are approved for shipment as genuine Sinotruk Howo parts.
A failing oil filter can cause a range of issues. Symptoms include low oil pressure (if the filter is severely clogged), engine noise from worn bearings, or contamination found during oil analysis. During every oil change, the filter should be replaced. If a filter shows signs of collapse or if the engine has internal wear, immediate replacement with a genuine 430-1012020B filter is essential.
Installation is straightforward thanks to the user-friendly spin-on design. The old filter is removed using a filter wrench. The gasket surface on the engine is cleaned. A film of clean oil is applied to the new 430-1012020B filter’s gasket. The filter is screwed on until the gasket contacts the mounting surface, then tightened an additional 3/4 turn as specified. This simple process helps technicians cut down on repair time and get Howo trucks back on the road faster.
Field performance of the 430-1012020B filter has proven its exceptional reliability. In a study of over 200 Howo trucks in long-haul service, engines using genuine filters showed significantly lower wear metal levels in oil analysis compared to those using generic filters. This reliability translates directly to reduced downtime, lower operating costs, and extended engine life for fleet operators.
For parts managers, the 430-1012020B oil filters are available individually or in cases, each with a lot traceability label. Bulk orders (24+ units) receive additional packaging discounts and priority handling. The filters are packaged in individual boxes to prevent damage during transit.
Warranty and support for the 430-1012020B are comprehensive. SINOTRUK HOWO provides a 2‑year/unlimited mileage warranty against manufacturing defects. Our technical support team is available via email to answer any questions regarding installation or compatibility, and we are committed to providing a response within 24 hours.
When ordering, always verify your engine model. The 430-1012020B is designed for specific applications within the WD615/MC engine family. Using the correct part ensures a perfect fit and optimal filtration performance, ensuring seamless installation without extra modifications.
In summary, the 430-1012020B Oil Filter is a vital component for ensuring the long-term health and performance of your SINOTRUK HOWO truck’s engine. Its premium materials, precision manufacturing, and rigorous testing make it the preferred choice for oil filtration. Trust the genuine 430-1012020B – it keeps your engine’s oil clean and your components protected.
Always replace the oil filter at every oil change as per the maintenance schedule. Use only genuine 430-1012020B filters to ensure proper filtration and engine protection. Prime the new filter by filling it with clean oil before installation to minimize dry start time.
Generic aftermarket oil filters often have poor media quality, inadequate burst strength, or faulty bypass valves, leading to poor filtration and potential engine damage. The genuine 430-1012020B is engineered to exact specifications with premium materials, ensuring a perfect fit and reliable performance, backed by factory-direct quality.
Generic aftermarket oil filters often have poor media quality, inadequate burst strength, or faulty bypass valves, leading to poor filtration, oil starvation, and catastrophic engine damage. The genuine SINOTRUK HOWO 430-1012020B Oil Filter is manufactured under strict quality controls, undergoing rigorous testing against international standards (e.g., ISO, CE) and Sinotruk’s original specs. Using premium materials and precision manufacturing ensures it withstands the extreme demands of heavy‑duty operation, delivering consistent performance and long life. This commitment to quality, combined with options for customization and small order acceptance, makes it the smart choice for maintaining your Howo truck.
By choosing the authentic part, you protect your investment and ensure your engine remains reliably lubricated for years to come. For fleet managers and owner‑operators who demand the best, the genuine 430-1012020B is the only responsible choice.
430-1012020B – 100% Genuine SINOTRUK HOWO Oil Filter • Protect your engine with confidence • No forms, just quality parts.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
