- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The exhaust valve spring is a vital component that ensures proper valve closing and sealing, directly affecting engine power, efficiency, and emissions. The genuine SINOTRUK HOWO 530-1003118 Exhaust Valve Spring is an OEM‑grade component engineered for a perfect fit and long‑term durability. As a critical element of the trusted Sinotruk howo parts family, this valve spring is crafted from high‑strength, heat‑resistant materials to endure harsh, high‑pressure conditions in truck engines—effectively protecting key components from premature wear. Its precision‑wound design ensures consistent tension and fatigue resistance even under extreme thermal and mechanical stress. Investing in this authentic component guarantees stable valve operation, consistent engine performance, and extended service life for your HOWO truck.
Exhaust Valve Spring
Пружина выпускного клапана
Muelle de válvula de escape
High‑Strength Heat‑Resistant Material: The 530-1003118 valve spring is made from premium oil‑tempered chromium‑silicon alloy wire, providing exceptional fatigue strength and resistance to high temperatures.
Precision‑Wound Geometry: Manufactured with tightly controlled coil pitch and diameter, ensuring uniform load distribution and preventing valve float at high RPMs.
Shot‑Peened Surface: The spring is shot‑peened to induce compressive residual stresses, greatly enhancing its resistance to crack initiation and extending operational life.
Precise Load Tolerances: Each spring is tested to meet strict load specifications at installed height, ensuring consistent valve seating pressure and optimal engine performance.
The table below provides detailed technical specifications for the genuine SINOTRUK HOWO 530-1003118 Exhaust Valve Spring. This data is essential for verifying compatibility with your specific engine model.
| Parameter | Specification | Details |
|---|---|---|
| OEM Part Number | 530-1003118 | SINOTRUK HOWO Original Code |
| Product Name | Exhaust Valve Spring | Single spring |
| Wire Diameter | 4.5 mm | Cold‑drawn |
| Outer Diameter | 32 mm | Ground ends |
| Free Length | 62 mm | Uncompressed |
| Installed Height | 48 mm | Valve closed |
| Load at Installed Height | 280 N ± 10% | Ensures proper seating |
| Load at Valve Open | 480 N ± 10% | At 10 mm lift |
| Number of Coils | 6.5 | Active coils |
| Material Grade | SAE 9254 / 51CrV4 | High fatigue strength |
| Surface Finish | Shot‑peened, phosphate coated | Corrosion resistant |
| Operating Temperature | -40°C to +250°C | Suitable for all climates |
| Compatible Engines | SINOTRUK HOWO WD615, WD618 series | Verify engine model |
Installation of the 530-1003118 Exhaust Valve Spring must be performed with precision. After removing the cylinder head, use a valve spring compressor to safely compress the spring and remove the valve keepers. Carefully extract the old spring and inspect the valve stem and guide for wear. Place the new spring over the valve stem, ensuring it seats correctly on the cylinder head. Compress the spring and install the valve keepers, verifying they are fully seated. Slowly release the compressor. Repeat for each valve, ensuring no coil binding.
The 530-1003118 exhaust valve spring is a direct OEM replacement for SINOTRUK HOWO engines, specifically the WD615 and WD618 series. Compatibility must be verified by matching the part number and engine specifications with your vehicle’s service manual. Using the correct spring ensures proper valve control and prevents premature valve failure. Genuine SINOTRUK HOWO parts guarantee a perfect fit with your engine’s original valvetrain geometry, eliminating the need for modification.
Always replace valve springs in sets (all intake and all exhaust) to maintain balanced cylinder performance. Check valve stem height and shim if necessary. After installation, rotate the engine by hand to ensure no interference.
The 530-1003118 spring provides consistent closing force, ensuring excellent valve sealing, which maximizes compression and prevents blow‑by.
Made from heat‑resistant alloy, it maintains its tension and shape even under extreme exhaust temperatures, effectively protecting the valve train from premature wear.
Precision‑wound geometry and tight load tolerances prevent valve float at high RPM, maintaining engine power and preventing piston‑to‑valve contact.
Using a genuine OEM valve spring prevents premature failure and costly engine repairs, keeping your SINOTRUK HOWO on the road and maximizing productivity.
A weak or broken exhaust valve spring can cause rough idle, misfires, loss of power, increased fuel consumption, and backfiring. In severe cases, it may lead to valve float, piston contact, and catastrophic engine failure. During routine maintenance, listen for ticking noises and perform a cylinder balance test. If any symptoms are present, immediate replacement with a genuine 530-1003118 Exhaust Valve Spring is essential to restore engine performance and prevent further damage.
Ignoring worn valve springs can result in dropped valves, requiring a complete cylinder head rebuild. Replacing them promptly with genuine 530-1003118 ensures your engine’s reliability and longevity.
To maximize the life of your 530-1003118 valve springs, perform regular valve clearance adjustments according to the manufacturer’s schedule. Use high‑quality engine oil and change it at recommended intervals to reduce wear on all valvetrain components. During major overhauls, always replace valve springs as a set. Avoid over‑revving the engine, which can induce spring surge and fatigue.
Always use genuine SINOTRUK HOWO replacement parts for engine repairs. Following these practices will help your engine deliver reliable power for years.
Generic aftermarket valve springs often use inferior steel, inconsistent wire diameter, or incorrect heat treatment, leading to premature sagging, breakage, and valve control issues. The genuine SINOTRUK HOWO 530-1003118 Exhaust Valve Spring is engineered to the exact specifications of your engine. It is manufactured under strict quality controls, undergoing rigorous testing against international standards (e.g., ISO, CE) and Sinotruk’s original specs. Using premium, fatigue‑resistant materials ensures it withstands the extreme demands of heavy‑duty diesel operation.
By choosing the authentic part, you protect your investment and ensure reliable engine performance for years to come. For fleet managers and owner‑operators who demand the best, the genuine 530-1003118 is the only responsible choice.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
