- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
Superior steering control and vibration damping are paramount for heavy‑duty truck operation, especially on uneven terrain. The genuine SINOTRUK HOWO WG1630840325 2# Steering Gear (Internal And External Circulation Damper) is an advanced OEM component that combines recirculating‑ball technology with a dual‑circuit hydraulic damper for exceptional shock absorption. As a key member of the trusted Sinotruk howo parts family, this steering gear ensures precise, fatigue‑free handling and minimizes wheel kickback in the most demanding environments. Engineered for durability and exact fitment, the WG1630840325 unit withstands extreme loads and continuous operation in mining, construction, and long‑haul applications. Investing in this authentic component restores factory steering feel and extends the life of your truck’s entire steering system.
2# Steering Gear (Internal And External Circulation Damper)
Рулевой механизм №2 (с внутренним и внешним циркуляционным демпфером)
Mecanismo de dirección n.° 2 (amortiguador de circulación interna y externa)
The WG1630840325 steering gear features a recirculating‑ball mechanism enhanced by an internal and external circulation damper system. The recirculating‑ball design provides low‑friction, high‑efficiency torque transmission, essential for heavy trucks. The dual‑circuit hydraulic damper, integrated into the gear housing, operates on both the input and output sides to absorb road‑induced vibrations from all directions. This results in virtually eliminated steering kickback, stable straight‑line tracking, and reduced driver fatigue, even on severely rutted roads or during off‑road operation.
The housing is precision‑cast from high‑strength nodular iron, ensuring rigidity and durability under extreme loads. All internal components—worm shaft, ball nut, bearings, and damper pistons—are manufactured to tight tolerances and case‑hardened for long service life. The damper system is sealed and filled with high‑viscosity hydraulic fluid, requiring no external adjustment or maintenance. This advanced design not only improves ride comfort but also protects the steering linkage and tires from excessive wear caused by constant road shock.
The table below provides detailed technical specifications for the genuine SINOTRUK HOWO WG1630840325 2# Steering Gear with Internal and External Circulation Damper. This data is essential for verifying compatibility and understanding the component’s capabilities.
| Parameter | Specification | Details |
|---|---|---|
| OEM Part Number | WG1630840325 | SINOTRUK HOWO Original Code |
| Product Name | 2# Steering Gear (Internal And External Circulation Damper) | Recirculating ball with dual‑circuit hydraulic damper |
| Type | Recirculating Ball | Integral power steering (if equipped) |
| Steering Ratio | 22:1 to 26:1 (model dependent) | Optimized for heavy vehicles |
| Input Shaft Spline | 36 spline (typical) | Matches steering column |
| Output Shaft | Tapered with keyway / splined | Connects to pitman arm |
| Maximum Output Torque | > 6,500 Nm | Handles extreme loads |
| Operating Pressure | Up to 160 bar (power steering) | Hydraulic assist |
| Damper Type | Dual‑circuit hydraulic (internal & external circulation) | Integrated, sealed |
| Housing Material | Nodular iron / cast steel | High strength |
| Weight (approx.) | 38 kg | Robust construction |
| Compatible Models | SINOTRUK HOWO series trucks | Check chassis and steering system |
Replacing the steering gear is a complex procedure best performed by qualified technicians. It involves safely raising the front of the vehicle, disconnecting the steering column shaft, pitman arm, and hydraulic lines (if power‑assisted). The old gear is unbolted from the chassis frame. The new genuine WG1630840325 unit must be aligned correctly, with the input shaft centered and the output shaft positioned for proper pitman arm orientation. All bolts must be torqued to manufacturer specifications. After installation, the steering system must be bled of air, and the front end alignment checked.
The WG1630840325 steering gear is a direct OEM replacement designed for specific SINOTRUK HOWO models. Compatibility must be verified by matching the part number with your vehicle’s VIN and steering system type. Using the correct gear ensures proper steering ratio, input shaft spline match, and hydraulic flow. Always use new O‑rings and seals during installation. After installation, a thorough steering check and road test are essential to ensure safe operation.
When replacing the steering gear, also inspect the steering linkage, tie rod ends, and pitman arm for wear. Replace any worn components to ensure optimal steering performance and safety.
The dual‑circuit damper system in the WG1630840325 steering gear absorbs road shocks from both directions, virtually eliminating steering wheel kickback and providing a smooth, controlled driving experience even on the roughest terrain.
By smoothing out vibrations and reducing the need for constant steering corrections, the internal damper significantly decreases physical demand on the driver. This improves comfort and alertness during long shifts, enhancing overall safety.
The advanced damping action protects tie rods, ball joints, and other steering linkage components from excessive shock loads, reducing wear and extending service intervals. This translates to lower maintenance costs and increased vehicle uptime.
Common symptoms of a failing steering gear include excessive free play in the steering wheel (looseness), difficulty steering (heavy steering), unusual noises (clunking or whining) when turning, and fluid leaks from the gear housing. If the dual‑damper system fails, you may notice increased steering wheel kickback and vibrations, along with a loss of directional stability. If you experience any of these issues, have the steering system inspected immediately. Replacing a worn gear with a genuine WG1630840325 unit restores proper steering response and safety.
Delaying replacement can lead to loss of steering control, increasing the risk of accidents. A worn gear can also cause uneven tire wear and put stress on other steering components. Prompt action with OEM parts ensures your SINOTRUK HOWO remains safe and reliable.
To maximize the life of your steering gear, maintain proper power steering fluid level and quality (if applicable). Regularly inspect the gear for leaks, damage, or loose mounting bolts. Check the steering linkage for wear. During routine service, have the front end alignment checked. If the vehicle is used in severe conditions, more frequent inspections are recommended.
Always use genuine SINOTRUK HOWO replacement parts for any steering system repairs. Following these practices will help ensure your truck’s steering remains precise and reliable for years to come.
The steering gear is a safety‑critical component. Generic aftermarket gears may use inferior materials, have incorrect ratios, or lack the precision of the original, leading to poor steering feel and potential failure. The genuine SINOTRUK HOWO WG1630840325 steering gear is manufactured to the exact specifications of your truck, ensuring proper fit, function, and durability. It incorporates the sophisticated dual‑circuit damper exactly as engineered, providing the intended level of vibration control and stability.
By choosing the authentic part, you guarantee reliable steering performance, enhanced safety, and peace of mind. For fleet managers and owner‑operators who prioritize uptime and safety, the genuine WG1630840325 is the only responsible choice.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
