- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
Maintaining peak efficiency in your heavy-duty truck’s air conditioning system requires every component to function flawlessly. The DZ14251848106 Condenser to Evaporator Connecting Pipe is a critical refrigerant line that ensures proper fluid transfer between two major heat exchangers. As a precision-engineered element among essential Shacman truck parts, this pipe guarantees the seamless flow of condensed refrigerant from the condenser to the evaporator core. Investing in authentic Shacman truck parts like this connecting line is vital for maintaining system pressure, preventing leaks, and ensuring efficient cooling performance. The integrity of your truck’s AC circuit directly impacts driver comfort and system longevity, making the selection of the correct OEM part, such as the DZ14251848106, a fundamental decision for reliable fleet maintenance.
Condenser To Evaporator Connecting Pipe
Трубка соединения конденсатора с испарителем
Tubo de Conexión del Condensador al Evaporador
The Condenser to Evaporator Connecting Pipe, identified by the precise OEM number DZ14251848106, plays a vital role in the refrigerant cycle of your SHACMAN truck’s air conditioning system. This specifically routed metal tube carries high-pressure, liquid refrigerant from the condenser, located at the front of the vehicle, to the expansion valve or orifice tube mounted near the evaporator core inside the dashboard. Its function is to deliver the cooled, condensed refrigerant to the metering device, which then regulates its flow into the evaporator. The integrity of this line is crucial because any restriction, kink, or leak can severely impair system performance, leading to insufficient cooling, increased compressor workload, and potential system failure.
This pipe is engineered to SHACMAN’s exact specifications for diameter, length, and shape to navigate the engine bay’s tight spaces and connect the two distant components accurately. The DZ14251848106 is typically constructed from aluminum or aluminum-coated steel, offering a balance of durability, corrosion resistance, and efficient heat transfer properties. Unlike flexible hoses used in other sections, this connecting pipe is often a rigid or semi-rigid line designed to maintain a consistent internal diameter and withstand the high pressures of the liquid line. For technicians, identifying the correct part via its unique OEM code, DZ14251848106, is essential for ensuring proper system pressures, refrigerant charge, and overall cooling efficiency after a repair.
Precision-Formed OEM Fit: The pipe is bent to the exact shape required for your specific SHACMAN model. This guarantees it will route correctly through the engine compartment without interfering with other components and will connect seamlessly to the condenser outlet and the expansion valve inlet without stress on the fittings.
High-Pressure Durability: Designed to contain high-pressure liquid refrigerant (often exceeding 250 psi), the tube is manufactured from robust materials that resist bursting, fatigue, and vibration-induced cracking, which are common causes of failure in the demanding environment of a truck.
Corrosion-Resistant Construction: The use of aluminum or specially coated steel provides excellent resistance to corrosion from road salts, moisture, and chemical exposure. This is critical for preserving the pipe’s wall integrity and preventing pinhole leaks over many years of service.
Optimized Internal Diameter: The pipe’s internal diameter is calibrated to maintain proper refrigerant velocity and pressure drop as specified by SHACMAN engineers. This ensures the thermostatic expansion valve (TXV) or orifice tube receives refrigerant at the correct pressure for optimal metering and system efficiency.
Thermal Efficiency: The metal construction allows for some subcooling of the liquid refrigerant as it travels, further enhancing system efficiency by ensuring the refrigerant entering the expansion device is fully condensed, which maximizes the cooling capacity of the evaporator.
Simplified Repair Process: Replacing a damaged line with the genuine DZ14251848106 part eliminates the need for custom bending or flaring of universal tubing. It comes with the correct fittings pre-installed, saving labor time and guaranteeing a leak-free connection from the start.
Replacing the condenser to evaporator pipe requires careful procedure. First, the refrigerant must be recovered from the system using proper equipment. The vehicle’s battery should be disconnected. The old pipe is accessed in the engine bay; it may require removing some shrouds or components for clearance.
The fittings at both the condenser and the expansion valve (or firewall connection) are loosened. It is crucial to use the correct wrench size to avoid rounding the fittings. The old DZ14251848106 pipe is removed, and the mating surfaces on the condenser and valve are cleaned. New O-rings, lubricated with refrigerant oil, must be installed on the fittings. The new pipe is carefully positioned, ensuring it is not twisted or under tension, and the fittings are tightened to the manufacturer’s specified torque. After installation, the system must be evacuated with a vacuum pump to remove air and moisture before being recharged with the correct amount of refrigerant.
Regular visual inspections of the AC lines during routine maintenance can prevent failures. Look for signs of oil accumulation around the fittings, which indicates a refrigerant leak. Check the entire length of the pipe for deep corrosion, dents, or abrasions from contact with other parts.
A common symptom of a problem with this liquid line is poor cooling performance accompanied by unusual hissing sounds (indicating a leak) or frost forming on a section of the pipe (indicating a restriction). If the pipe is severely corroded or damaged, it must be replaced. Using the genuine DZ14251848106 part ensures the restriction-free flow and pressure integrity necessary for the expansion valve to function correctly, which is key to efficient evaporator performance and overall system capacity.
The DZ14251848106 Connecting Pipe is designed for specific SHACMAN truck models, primarily the F3000, X3000, and M3000 series, which are widely used in demanding transport and construction roles. In the air conditioning refrigerant cycle, this component is part of the high-pressure liquid line. After the refrigerant releases heat in the condenser and changes from a gas to a liquid, it is this pipe that delivers it to the metering device at the evaporator.
Its role is critical: any compromise in this delivery line affects the entire system. A leak leads to a loss of refrigerant charge. A kink or internal clog creates a restriction, causing a pressure drop that can lead to insufficient refrigerant feeding the evaporator and potentially causing the compressor to work against abnormally high head pressure. For fleet technicians, having the correct, model-specific DZ14251848106 pipe in inventory means being able to quickly address these issues, restore the designed refrigerant flow path, and ensure the AC system cools effectively, which is non-negotiable for driver comfort and safety in hot climates.
Guaranteed Fit and Routing
The precise bends and lengths of the OEM DZ14251848106 pipe ensure it installs without forcing or bending, preventing stress on fittings and guaranteeing it clears all adjacent components like wiring harnesses and hydraulic lines.
Maintains System Efficiency
The correct internal diameter and smooth internal surface of the genuine pipe prevent flow restrictions, ensuring the refrigerant pressure and subcooling at the expansion valve are optimal for maximum cooling efficiency.
Prevents Costly Secondary Damage
A leaking or restricted aftermarket line can lead to compressor failure due to loss of lubrication or extreme pressure. The genuine part protects your investment in the entire AC system by ensuring reliability.
In summary, the DZ14251848106 Condenser to Evaporator Connecting Pipe is a fundamental hydraulic link in your SHACMAN truck’s air conditioning system. While it may seem like a simple tube, its precise engineering is vital for maintaining proper refrigerant flow, pressure, and ultimately, the cooling capacity that drivers depend on. Choosing this genuine OEM component is an investment in system integrity, preventive maintenance, and long-term reliability.
For fleet maintenance operations, addressing AC performance issues often involves checking these critical lines. Having the correct DZ14251848106 part on hand allows for a swift and definitive repair, eliminating guesswork and ensuring the system operates as designed. By specifying this exact OEM number, you secure the necessary component to complete the refrigerant’s journey efficiently, guaranteeing that your SHACMAN truck’s cabin remains a cool and comfortable refuge regardless of the outside temperature.
This product description is for informational purposes. Air conditioning system service involves handling pressurized refrigerant and should only be performed by certified technicians using proper equipment. Always verify the OEM part number DZ14251848106 against your vehicle’s documentation or the removed component before purchase. Proper evacuation and recharge procedures are critical when replacing any refrigerant line.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
