- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The genuine SHACMAN DZ16251240043 Third Door Sill set is an essential structural component designed for the tertiary access doors on extended or sleeper cab configurations of SHACMAN trucks. This OEM part, encompassing both left and right sides, forms the critical lower threshold that ensures a secure seal and robust foundation for rear compartment entry. For operators seeking durability, investing in authentic parts like the DZ16251240043 is paramount for long-term cab integrity. Discover our comprehensive range of reliable components in our catalog of Shacman truck parts.
Crafted from high-strength, galvanized steel with advanced corrosion-resistant coatings, the DZ16251240043 is built to endure heavy foot traffic, impact from cargo, and exposure to extreme weather without succumbing to rust or deformation. Its precise engineering is vital for creating a watertight barrier with the door’s lower weatherstrip, preventing moisture, dust, and noise infiltration into the cabin’s rear area. Replacing a compromised sill with the correct DZ16251240043 set restores structural support, enhances safety for occupants, and protects the vehicle’s resale value by averting corrosion in critical cab sections. The keyword DZ16251240043 is highlighted early for SEO and part identification purposes.
Third Door Sill (Left/Right)
Порог третьей двери
Umbral de Tercera Puerta
The DZ16251240043 Third Door Sill performs multiple vital roles in maintaining the cab’s functionality and integrity. Primarily, it acts as a load-bearing threshold for the rear or tertiary doors, supporting the weight of passengers and equipment during entry and exit. This component, DZ16251240043, distributes stress across the cab’s reinforced floor structure, preventing deformation and ensuring the door frame remains aligned over time. Without a solid sill like the DZ16251240043, doors can sag, leading to improper closure and increased wear on hinges and latches.
Additionally, the DZ16251240043 provides a critical sealing surface. Its top edge is designed to mate perfectly with the door’s lower weatherstrip, creating a continuous barrier against water, air, and contaminants. This seal is essential for keeping the sleeper or storage area dry and comfortable, especially during inclement weather. The sill also channels water away from the door opening through integrated drainage features, protecting underlying metal from corrosion. Furthermore, the DZ16251240043 enhances cab rigidity and contributes to a finished, professional appearance for the vehicle’s rear access points.
The genuine DZ16251240043 is manufactured from premium hot-dip galvanized steel, chosen for its exceptional strength and corrosion resistance. The galvanization process coats the steel in a layer of zinc, which acts as a sacrificial anode to protect against rust, even if the surface is scratched. This makes the ideal for harsh operating environments where exposure to road salt, moisture, and chemicals is common. The material ensures long-term durability under heavy use.
After galvanization, the DZ16251240043 undergoes a rigorous finishing process. This includes phosphate pretreatment for enhanced adhesion, followed by application of a high-quality epoxy primer and a durable topcoat paint. Some versions may feature a textured or plastic coating for added abrasion resistance. This multi-layer protection ensures the DZ16251240043 can withstand scuffing from boots, impact from tools, and UV exposure without degrading. The robust build of the DZ16251240043 guarantees it maintains structural integrity and appearance throughout the truck’s service life.
As an OEM part, the DZ16251240043 is engineered to match the exact specifications of SHACMAN truck models with third door access, such as certain X3000 and M3000 series with extended cabs. Its design incorporates precise contours that align seamlessly with the cab’s door opening, floor pan, and pillar structures. This ensures a perfect fit that is crucial for effective sealing and structural support. The set includes both left and right sills, providing a complete solution for bilateral door installations.
Compatibility verification is essential before ordering the DZ16251240043, as cab configurations vary by model year and trim. Using the correct part guarantees that all mounting points, weld flanges, and seal interfaces align accurately. This plug-and-play fit eliminates the need for modifications during installation, saving time and ensuring the repair meets factory standards. The DZ16251240043 is designed to integrate flawlessly with existing door hardware and weatherstripping, maintaining the vehicle’s original performance and safety features.
| Specification | DZ16251240043 Details |
|---|---|
| OEM Part Number | DZ16251240043 |
| Component Name | Third Door Sill (Left & Right Set) |
| Brand | SHACMAN |
| Primary Material | Hot-Dip Galvanized Steel |
| Surface Finish | Primed and Painted / Protective Coating |
| Application | Tertiary/Rear Access Doors on Extended Cabs |
| Compatibility | SHACMAN Models with Third Door Openings |
| Condition | New, Genuine OEM Part Set |
The DZ16251240043 plays a pivotal role in preventing corrosion within the cab’s rear structure. By forming a tight seal with the door, it blocks liquid water from seeping into the floor area, which is a common cause of rust in seat mounts, electrical systems, and insulation. The galvanized steel construction of the DZ16251240043 itself resists rust, ensuring the sill remains intact even when exposed to wet and salty conditions. This protection is vital for maintaining the cab’s longevity.
Additionally, the design of the DZ16251240043 often includes integrated drip edges or channels that direct moisture away from critical areas, promoting drainage to the exterior. A damaged or non-OEM sill can compromise this function, leading to water accumulation and accelerated corrosion. Replacing it with the genuine DZ16251240043 is a proactive measure to safeguard the vehicle’s structural health. For trucks operating in regions with heavy rainfall or winter road treatments, the DZ16251240043 is an indispensable component for preserving cab integrity and avoiding costly repairs.
Installing the Third Door Sill is a specialized task that typically requires professional expertise, as it involves structural welding and sealing. The process begins with removing interior trim, floor coverings, and any components obstructing access to the old sill. The damaged DZ16251240043 is then detached by drilling out factory spot welds or removing bolts, depending on the cab design. Care must be taken to preserve the surrounding metal for proper reinstallation.
After removal, the cab’s mating surfaces are cleaned, treated with weld-through primer, and inspected for corrosion. The new DZ16251240043 is precisely aligned using factory reference points to ensure door fit and seal accuracy. It is welded in place following the original weld pattern, and all seams are sealed with automotive-grade sealant to prevent water ingress. Due to the structural importance of the DZ16251240043, proper installation is critical for safety and performance. Using the genuine part simplifies alignment and ensures compatibility with existing cab geometry.
The differences between the genuine DZ16251240043 and aftermarket sills are significant in terms of quality and performance. Aftermarket parts are often made from thinner, non-galvanized steel that lacks adequate corrosion resistance. Their profiles may be imprecise, leading to poor fit that requires grinding or bending during installation, which can weaken the structure and compromise the seal. This can result in persistent water leaks and reduced door alignment.
Moreover, the protective coatings on aftermarket sills are typically inferior, consisting of simple paint that chips easily and offers minimal rust protection. The genuine DZ16251240043, with its hot-dip galvanization and multi-layer finish, is designed for decades of reliable service. Additionally, OEM parts like the DZ16251240043 are tested to meet safety and durability standards, ensuring they contribute to cab rigidity in collisions. Choosing an aftermarket alternative risks premature failure, ongoing moisture damage, and potential safety issues, making the DZ16251240043 the recommended choice for a lasting repair.
Regular inspection of the Third Door Sill is essential for early detection of issues. Visually examine the sill along its entire length for signs of paint bubbling, flaking, or visible rust, which indicate underlying corrosion. Press on the sill to check for soft spots or flexing, as this may signal internal rust weakening the metal. Also, inspect the seal between the door and the DZ16251240043 for gaps or uneven compression that could allow water entry.
Inside the cab, be alert for dampness, musty odors, or water stains in the rear footwell area, as these can point to a leaking sill. Listen for increased wind noise from the lower door region while driving, which may indicate seal failure. If the door becomes difficult to close or appears misaligned, the DZ16251240043 may be damaged. Addressing minor surface rust promptly with touch-up paint can extend the sill’s life. However, for structural damage or severe corrosion, professional replacement of the DZ16251240043 is necessary to maintain cab safety and dryness.
The Third Door Sill (Left/Right) is not merely a cosmetic trim; it is a structural element that contributes to the cab’s overall rigidity and safety. It helps maintain the integrity of the door opening, ensuring that the door latches securely and operates smoothly. In the event of a side impact or rollover, a robust sill like the DZ16251240043 helps preserve occupant space by resisting intrusion and providing a stable anchor for door hinges and latches.
A compromised or rusted DZ16251240043 can lead to door sagging, which may cause the door to open unexpectedly during a collision, increasing injury risk. Therefore, the condition of structural components like the DZ16251240043 is critical for vehicle roadworthiness and safety compliance. Regular maintenance and timely replacement with the genuine Third Door Sill (Left/Right) ensure that the truck meets safety standards and protects occupants. This underscores the importance of using OEM-quality parts for all structural repairs.
To ensure you receive the authentic DZ16251240043, purchase from authorized SHACMAN dealers or reputable heavy-duty parts suppliers. Genuine parts will have the correct OEM number clearly marked on the packaging or the part itself, and they will exhibit high-quality manufacturing with consistent galvanization and paint. The weight and stiffness of the genuine DZ16251240043 will be superior to imitation products.
Be cautious of parts sold at unusually low prices, as they may be made from inferior materials or have poor fitment. Authentic DZ16251240043 sills often come with installation guidelines or technical documentation. Verifying the part number DZ1625Third Door Sill (Left/Right)1240043 against your truck’s model and configuration is essential before ordering. Investing in the genuine component guarantees that you receive a part that meets all original specifications for strength, corrosion resistance, and dimensional accuracy, ensuring a repair that restores factory performance.
The genuine SHACMAN Third Door Sill set is backed by the manufacturer’s standard parts warranty, covering defects in materials and workmanship. This warranty provides assurance of quality and reliability, giving peace of mind to owners and fleet managers. Using OEM parts like the DZ16251240043 also helps maintain any existing vehicle warranties related to cab structure or corrosion protection.
The long-term value of the DZ16251240043 lies in its ability to protect the larger investment of the truck cab. By preventing water intrusion and corrosion, it avoids expensive repairs to floor pans, wiring, and insulation. It also supports safety and resale value. For fleet operations, specifying the genuine Third Door Sill (Left/Right) reduces downtime and future maintenance costs, ensuring each vehicle remains a reliable asset. Choosing the DZ16251240043 is a smart investment in the durability and operational readiness of your SHACMAN truck.
The Third Door Sill (Left/Right) is available through a global network of SHACMAN parts distributors and authorized online retailers, ensuring accessibility for truck owners worldwide. Its standardized OEM number facilitates easy ordering and reduces the risk of receiving incorrect parts. Efficient supply chains ensure that the DZ16251240043 can be delivered promptly to repair shops and fleet facilities, minimizing vehicle downtime. This global availability supports the maintenance needs of international SHACMAN truck operators, contributing to consistent vehicle uptime and performance.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
