- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
In the complex and safety-critical air brake system of a SINOTRUK Howo truck, every valve plays a decisive role in translating driver input into reliable stopping power. As a trusted supplier of genuine Sinotruk howo parts, we present a key control component: the **Valve**, identified by the critical OEM part numbers **61260050073** and **61260050025**. This specific valve is an integral part of the truck’s pneumatic control circuit, responsible for managing air pressure to ensure balanced, responsive, and safe brake application. Choosing the genuine **61260050073 / 61260050025** valve is an investment in the fundamental safety and predictable performance of your heavy-duty vehicle’s most important system.
Air Brake System Valve
Управляющий клапан тормозной системы
Válvula del sistema de frenos de aire
The valve designated by part numbers **61260050073** and **61260050025** acts as an intelligent control module within the SINOTRUK Howo’s air brake system. Its primary role is to **reliably regulate, direct, or modulate compressed air** flowing from the reservoirs to the brake chambers. Depending on its specific type (such as a relay valve, quick-release valve, or pressure limiting valve), it performs critical tasks like amplifying brake signal pressure to the rear axles, ensuring balanced application timing between axles, or rapidly exhausting air to release the brakes. This precise control is what transforms a simple pedal push into a smooth, powerful, and balanced braking event across multiple tons of vehicle and cargo.
This component is a robust assembly of a die-cast or forged body, internal pistons or diaphragms, precision springs, and numerous seals. When functioning correctly, the valve **61260050073 / 61260050025** responds instantly to changes in system pressure, moving its internal mechanisms to either open, close, or meter airflow. Its design is calibrated to provide the correct pressure characteristics and response times that SINOTRUK engineers specified for the Howo’s optimal braking dynamics. A failure in this unit can directly lead to delayed braking, uneven brake force, brakes that drag and overheat, or a significant loss of overall braking efficiency.
The health of this valve is therefore non-negotiable for safety. It operates continuously, exposed to moisture, contaminants from the air compressor, and constant pressure cycles. Over time, internal seals degrade, springs fatigue, and pistons can stick. Using the genuine **61260050073 / 61260050025** valve ensures that every aspect of its performance—from its flow rate and crack pressure to its exhaust speed—matches the original equipment, preserving the carefully designed safety margins of your truck’s braking system.
Ensures Predictable & Balanced Braking
Restores factory-specified pressure control and timing, eliminating uneven brake pull, sluggish response, or erratic behavior that compromises vehicle stability and safety during stops.
Leak-Free Operation for System Efficiency
Features high-quality internal seals that prevent air leaks, helping to maintain optimal reservoir pressure, reduce compressor workload, and improve the overall energy efficiency of the air system.
Durable Construction for Demanding Service
Built with corrosion-resistant materials and robust internal components designed to withstand vibration, temperature extremes, and the demanding duty cycles of commercial trucking.
Guaranteed Compatibility and Direct Fit
As a genuine SINOTRUK part, this valve guarantees the correct port thread sizes, mounting footprint, and electrical connections (if applicable) for a hassle-free, bolt-on replacement.
| Parameter / Feature | Specification / Description |
|---|---|
| OEM Part Number | 61260050073 / 61260050025 (Consult manual for specific application) |
| Component Name | Air Brake System Control Valve (e.g., Relay Valve, Control Valve) |
| Brand & Application | SINOTRUK Howo (Air Brake Pneumatic Control Circuit) |
| Primary Function | To regulate, direct, or modulate compressed air for controlled brake application and release. |
| Type | Pneumatic Valve (typically diaphragm or piston-operated). |
| Operating Pressure | Rated for standard truck air system pressure (e.g., up to 150 psi / 10 bar). |
| Port Connections | Multiple air line ports (supply, delivery, control, exhaust) with standardized threading. |
| Product Condition | New, 100% Genuine OEM Part |
A failing control valve, such as **61260050073 / 61260050025**, manifests through distinct issues in braking behavior and system health. The most common symptom is an **audible, persistent air leak** (hissing) from the valve body itself, especially after a brake application. Drivers may report **slow brake application or release**, causing a sluggish or “spongy” pedal feel. **Uneven braking**, where one axle or side engages before the other, is a strong indicator of a malfunctioning valve affecting balance. In severe cases, brakes may **drag and not fully release**, leading to overheating and accelerated wear. The air compressor may also **cycle excessively** due to pressure loss from internal valve leaks.
Replacing this valve is a task for a technician familiar with air brake systems. **Safety First:** Park on level ground, chock the wheels securely, and fully drain the air pressure from all system reservoirs. Identify the faulty valve, then **clearly label each air line** before disconnecting it to ensure correct reassembly. Remove the mounting bolts and the old valve. Before installing the new genuine **61260050073 / 61260050025** valve, inspect the mounting surface and clean it if necessary.
Installation is the reverse. Position the new valve, reconnect each air line to its correctly labeled port, and secure the mounting bolts. It is good practice to use a thread sealant compatible with pneumatic systems on the pipe threads. Once installed, build system pressure and perform a thorough **leak-down test**. Apply soapy water to all connections and the valve body to check for bubbles. Finally, conduct a **static and dynamic brake test**. With the engine running, apply and release the brakes repeatedly, checking for proper response and listening for leaks. A short, careful road test in a safe area will confirm that braking is balanced and effective.
**Important Consideration:** Always consult the specific SINOTRUK Howo service manual to confirm the exact valve application for part numbers **61260050073** and **61260050025**. Due to the critical safety role of this component, if you lack experience with air brake systems, it is strongly recommended to have replacement performed by a qualified commercial vehicle mechanic. Using the genuine OEM valve ensures not just a perfect fit, but also that the critical performance characteristics—like response time and pressure gain—are exactly as the vehicle’s designers intended, preserving the integrity of your entire braking system.
The Control Valve **61260050073 / 61260050025** is a fundamental pillar of your SINOTRUK Howo’s air brake system. Its precise operation ensures that the powerful force of compressed air is delivered accurately and reliably to the brake chambers, translating intention into safe, controlled deceleration. In an arena where failure is not an option, this component’s reliability is paramount.
Do not compromise on the quality of such a critical safety component. Opting for the genuine **61260050073 / 61260050025** valve guarantees material integrity, engineering precision, and performance that matches the original factory specification. It is a direct investment in the safety of your driver, your cargo, and the public road, as well as in the predictable performance and longevity of your vehicle’s most vital system. Trust only in OEM parts to maintain the precise control your heavy-duty truck requires.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
