Foton Multi-Way Valve Oil Pipe Assembly-1

Multi-Way Valve Assembly: The central control unit directing pressurized hydraulic fluid to various circuits (e.g., lift cylinders, remote outlets) based on operator input. This assembly is the primary destination for the inlet pipes.

Safety Valve Assembly: An integrated or directly attached pressure relief mechanism protecting the hydraulic system from damage by limiting maximum pressure. It’s a vital safeguard within the valve block.

Multi-Way Valve Oil Inlet Pipe Assembly-1: The primary high-pressure line delivering oil from the pump (or priority valve) directly to the main inlet port of the Multi-Way Valve.

Multi-Way Valve Oil Inlet Pipe Assembly-2: A secondary high-pressure line, likely supplying an auxiliary port or a different section of the Multi-Way Valve for controlling additional functions.

Straight Thread Joint Body 1: A specialized high-pressure fitting providing a sealed connection point, likely where one of the inlet pipes attaches securely to the valve block using a specific thread type (JIC, ORFS, etc.).

Joint: Represents the connection interface itself at pipe ends or valve ports.

Multi-Way Valve Oil Return Pipe Assembly: The dedicated low-pressure line carrying expended hydraulic fluid away from the Multi-Way Valve back to the tractor’s reservoir after performing work in the cylinders or motors.

Multi-Way Valve Fixing Bracket Weldment: A robust, welded bracket that physically mounts and supports the Multi-Way Valve Assembly securely to the tractor chassis or frame, preventing movement and vibration damage.

Bolt (Triple Mention): High-strength bolts used in conjunction with washers to firmly attach the Multi-Way Valve Assembly to its Fixing Bracket Weldment. The triple mention emphasizes the secure mounting pattern.

Combined Seal Gasket: A specialized, robust seal used at flanged connections between pipe assemblies and the valve body or between valve sections, ensuring high-pressure integrity.

Nut: Used to tighten and secure joints, particularly those using the Straight Thread Joint Body.

Washer (Multiple): Flat washers used under bolt heads and nuts associated with mounting (Bracket) and potentially pipe connections to distribute load and prevent damage.